E-Seva Kendra Police Lock up room Campus at Vellore

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The Outer frame: 63.50 x 38.00 x 3.00 mm at 1.72 kg/m, Centre mullions: 3.50 x 38.00 x 3.00mm at 1.55 kg/m, Aluminium Clips: 17.27 x 17.15 x 1.50mm at 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m x 2.10m covered with 5.50mm thick plain glass with neccessary aluminium clips of size 17.27 x 17.15 x 1.50mm at 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specificationss and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specifications 1868/1962 / and should be got approved by the Executive Engineer before use on work

Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top. The outer frame shall be with aluminium box section 101.60 x 44.45 x 3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50.00 x 44.45 x 2.50mm @ 1.292 kg/m, Bottom rail: 100.00 x 44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50.00 x 44.45 x 2.50mm @ 1.292 kg/m, Alu Clips: 17.15 x 17.27 x 1.50mm @ 0.176 kg/m, Alu. Handle: 100 x 30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250 x 12mm - Each., aluminium tower bolt 200 x 12mm - 1No., aluminium Hydraulic door closer - 1No., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specifications and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete. Aluminium sections and furniture fittings shall be got approved by the Executive Engineer incharge. (Single Leaf).

Supplying , fabricating and fixing in position Aluminium Anodised natural colour mat finish Four track sliding window in all floors with Aluminium sections of outer frame Bottom Track [email protected] kg/m, Top & vertical 92.34x29.70x1.50 at 1.066 kg/m and Shutter Vertical 39.00x20.00x1.50 at 0.493 kg/m Top & Bottom 18.00x36.60x1.50 at 0.439 kg/m Vertical locking arrangement 28.94x39.00x1.50 at 0.632 kg/m with necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing 4mm thick plain glass including cost of all materials , labours, power consumption required for fabrication , drilling holes in RCC colunm, slab, masonry walls wherever necessary with power drills to the required extent and make good to the original condition after fixing etc... complete complying with standard specifications and as directed by the deparmental officers.The aluminium sections are to be anodised with matt finish under electrically controlled in accordance with IS 1868 / 1962 for an average anodic film thickness 15 microns etc., complete

Supplying and fixing Computer Table and cup-board arrangements using Termite proof/ water proof ply wood of 19mm Thick of all sides Computer Table and cup-board arrangements using 19mm thick plywood board of exterior grade Confirm to I.S 12406/1989. Table size 1.20x0.75x0.80 m using table top of based of size 1.20x0.75 with vertical Stem Supported at 4Nos of 0.80m ht and the rear side table closing of size 1.20mx0.80m ht, with necessary UPS partitions, key boards, side cubpoard arrangements,with above front face T.W.beading of size 40x15mm and the tables, and including labour charges for fixing etc., complete complying with standard specifications and as directed by the departmental officers during execution . the sample material are to be used approved by the Executive Engineer's before use on works.and as directed by the departmental officers.

Supplying of Hiback Cushion Chair of ISI mark Company branded Including cost of all taxes and supply of direct to site of work with all accessories etc., complete as directed by the Departmental officers ( The Supply of chairs should be got approved by the Executive Engineer before supply )

GST @ 18 %