8604 SPL REPAIR TO BLDG NO 21 AND 24 (OR MD ACCN) AND PROVN OF RAINWATER DRAIN PIPE FOR BLDG NO P-39 AT AIPT AND APTC DEPOT UNDER GE (CENTRAL) PUNE

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each with and including making good the disturbed surfaces as original with PCC (1:2:4) type B0 complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but not exc 4 Sqm each with and including making good the disturbed surfaces as original with PCC (1:2:4) type B0 complete all as specified and as directed.

Taking down shutters of any description exc 1 sq. m but n. exc. 2 Sq. m each complete all as specified and as directed.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. Note :- Rates quoted deemed to include S&F of hinges, lugs, lock strike plate.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. Note :- Rates quoted deemed to include S&F of hinges, lugs, lock strike plate.

M&L PCC 1:3;6 type C1 (using 20mm graded crushed stone aggregate) as in steel chowkhats, hold fasts and bed blocks etc including necessary form work complete all as specified and directed.

S&F 30mm thick flush shutters, solid core Construction, with particle board core and plywood face panels, commercial type on both sides, both faces to be covered with decorative face veneer with lipping to match complete all as specified and directed

Supply and fixing (factory Made) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (With sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) both faces to be covered with decorative face veneer with lipping to watch complete all as specified.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2020 Part II complete all as specified and directed.

S&F anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed (Note :- Glass pane/wire mesh shall be measured and paid sepertely)

Supply only 4.0mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

Supply only stainless steel wire 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to aluminium window / ventilator shutters / steel windows etc complete all as specified and directed

S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.

S&F 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F stainless steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed.

S&F 150mm long aluminium anodized floor door stopper with rubber shoe, fixed to bottom rail of door complete all as specified and directed.

S&F in repairs curtain rod, 25mm dia, stainless steel with and including wall to wall side matching brackets 02 Nos at each opening and stainless steel side stopper fency type of required shape and size 2 Nos at each opening complete all as specified and directed.

S&F mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) un-reinforced cleaning the premises and removal of rubbish out side the MD land complete all as specified and directed.

Demolition of brick work / Stone masonary / PCC block masonary build in cement morter of any description and removing of rubbish out side the MD land complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position and removing of rubbish out side MD land complete all as specified and directed.

M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork complete all as specified and directed.

M&L for precast concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde D-5 and setting in CM 1:6 complete all as specified and directed.

M&L for brick work with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off outside MD land complete all as specified and directed.

M&L for 75mm thick (1:3:6) Type-C2 (using 40mm graded crushed stone aggregate) as in plinth protection / path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring complete all as specified and directed.

M & L non skid ceramic coloured tiles 600X600 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20mm thick screed bed of CM 1:6 complete all as specified and directed.

M&L machine cut kota stone 20-25mm thick in floor, laid over and including 20mm screed bed CM(1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

.Ditto as item No 34 abvoe but in skirting over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300X 450X 7 mm/300x600x7mm/450x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of CM 1:3 complete all as specified and as directed.

M & L Non - skid ceramic coloured tiles,size 300x300x 7 mm thick laid on floor , over and including 15mm thick screed bed in cement mortar 1:6 and pointed in white cement with pigment to match the shade of the tiles, complete all as specified and as directed.

M&L 18-20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite and ensure best adhesion to surface complete all as specified and as directed.

M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

M&L for rubber moulded glossy chequered cement concrete coloured tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking down cement plastering on brick or stone walls etc, including racting out joints complete all as specified and as directed.

M&L for rendering 15mm thick on stone/brick masonary surfaces other than fair faces of brick surfaces work or stone surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on brick /stone masonary surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for dubbing out average 10mm thick in CM 1:6 on irregular face of walls (when specifically ordered in writing) complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over a thin layer of wall care putty complete all as specified and directed.

Complete removal of old decorated surface of wall including brooming down and cleaning the surface and applying two coat of cement base paint of approved tint all as specified and directed.

Complete removal of old decorated surface of walls including brooming down and cleaning the surfaces and applying two coat of distemper (Oil emulsion) over a thin layer of thick wall care putty of approved tint all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling of size 600 x600x mm on GI powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 2-3 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as directed and specified

Dismantling of single layer manglore pattern tiles and ridge in roofing /AC sheet/GI Sheet roofing complete all as specified and directed.

Dismantling of battens for tiles, shingles etc, of any size and description spaced exc 15cm including tilting fillets complete all as specified and as directed.

Dismantling timber scantling of size 10 Sqcm and over in section as in unframed work complete all as specified and directed.

M&L for second clas soft wood, clean sawn in scantling over 40 sqcm and over in section and including dismantling timber scantling 40 sqcm and over in section, unframed work, in any position complete all as specified and directed by Engr-in-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ 150 as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws complete all as specified and directed.

M&L for MS structural steel work framed as in trusses, purlins,rafters post etc conforming to grade E-250 (Fe-410W quality "A") including shaped washers including necessary clits required length,notching,drilling ,reveting and or welding of connecting with nut bolts with angle ,cleat,fish plat,gusset plate and also erecting in true position complete all as specified and directed.

Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.

S&F in repairs vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed including taking out old one.

S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed.

Supply and fixed in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to arf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm®

S&F in repairs 15mm bore chromium plated bib cock fancy type. Make Jaquar cat part no:FLR-5047N or equivalent model in KOHLER and ROCA.

S&F in repairs 15mm bore chromium plated angle cock fancy type.Make Jaquar cat part no:FLR-5053N or equivalent model in KOHLER and ROCA.

S&F in repairs Brass CP wall mixer for mixing hot & cold water with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed.Make Jaquar cat part no:FLR-5281N or equivalent model in KOHLER and ROCA.

S&F in repair brass chromium plated overhead shower 100mm round shape single flow with rubit cleaining system fitted to steel pipe or union complete.Make Jaquar cat part no:OHS-1989 or equivalent model in KOHLER and ROCA.

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.

S&F in repairs 15mm bore chromium plated pillar cock fancy type.Make Jaquar cat part no:FLR-5015 or equivalent model in KOHLER and ROCA.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of pre-painted cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. Make Jaquar cat part no:CNS -WHT-801 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs chromium plated soap dish complete all as specified and directed.Make Jaquar cat part no:AKP-35731P or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges Make Jaquar cat part no:AKP-35711PS or Techno commercial equivalent model in KOHLER and ROCA.

Dismantling cast iron work of any de scription and in any position complete all as specified and as directed.

S& F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

.ditto as item no 77 abvoe but 75mm bore

S&F 110mm PVC (SWR) bends pined on PVC pipe complete all as specified and as directed.

S&F 75mm PVC (SWR) bends pined on PVC pipe complete all as specified and as directed.

S&F PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

S&F PVC (SWR) cowl 75/100mmdia as required complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete all as specified and as directed.

M & L for rolled sections Fe 410 -W (Gde- E- 250) quality- A as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc and fixing complete at heights upto 15mtrs with and including supply and fixing by welding /riveting/gusset plates/steel plates/bolts etc of any description.

Dismantling of plain / corrugated steel or pre- painted galvalume sheeting any gauge, thickness, including Nainital or similar pattern roof coverings and refixing the same sheet as in roof covering /cladding to wall at any height, fixed with self tapping screws complete all as specified and as directed.

Excavation in trenches not exc 1.5 Mtr wide and exceeding 1.5 Mtr depth but not exc 3.00 Mtr depth for foundations, manholes etc and getting out in in disintegrated rock complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as directed.

Removing the excavated materials (soil) to a distance n. exceeding 50 Mtr and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as directed.

M & L 200 mm bore dia RCC pipes class NP-2 with socketed ends laid and jointed complete with rubber ring joints of complete all as specified and as directed.

M&L PCC (1:4:8) type D-2 as in foundations, filling in mass concrete etc.

Cutting into existing manholes for connecting new drains of 150mm bore dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as directed .

M & L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs for manholes / drains etc set in CM 1:4 all as specified and as directed.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width witth solid blocks of PCC (1:5:8) grade D-5 and set in in CM 1:6 including dismantling of old brickwork or stone / boulder / PCC block masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, bands, plinth courses, string courses, lacing courses, coping kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles etc complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete surfaces finished even and smooth using extra cement with neeru finish complete all as specified and as directed.

Dismantling ceiling/boarding of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

M&L for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws false ceiling on aluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm complete including 2 coats of Oil Bound Distamper on ceiling surfaces complete all as specified.

Taking down of existing Ceilling fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by minor repairs and painting clamping of fan rod to roof iron channel, required down rod complete all as specified and as directed Note: The quoted rate shall include the rates of spares and rewiring of fan mentioned above.

Taking down of existing Ceilling fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by rewiring and repairs such as capacitor replacement, bearing repalcement and painting, clamping of fan rod to roof iron channel, required down rod, rewinding of fans complete as per site requirement complete all as specified and as directed. Note: The quoted rate shall include the rates of spares and rewiring of fan mentioned above.

M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI 694 marked in PVC casing caping 25mm wide ISI marked including all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note: The quoted rate shall include taking down of copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Making good of disturbed surfaces will be done by contractor without any extra claims

One light point controlled by one switch complete all as specified and directed.

two light point controlled by one way switch

One fan point controlled by one 5 Amps one way modular switch and modular regulator complete all as specified and directed.

One Exhaust fan point controlled by one 5 Amps one way modular switch complete all as specified and directed.

One call bell point controlled by push bottom.

One 5/6 Amp socket controlled by one switch same board complete all as specified.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified Point

All as per item no. 02 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI-694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket/Earth plug socket independent and connecting to common earth dolly complete all as specified.

Supply and fix LED building security light 30 W IP 65 pressure die cast aluminium housing with Gl bracket of suitable size complete including clamps, screws etc and dia complete all as specified and directed

S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as Directed

S&F socket out let 5/6 Amps 3 pin modular type incl connection complete all as specified and as directed

S&F modular bell push type single pole one way 5/6 amps incl connection complete all as specified and as directed

S&F of modular rotating step type electronic fan regulator, 120W /280 volts two module incl connection complete all as specified and as directed

S&F of modular socket twin type, 5 pin 6/16 Amps flush type incl connection complete all as specified and as directed

S&F modular switch type single pole one way 15/16 amps incl connection complete all as specified and as directed

S&F of ding dong call bell incl connection complete all as specified and as directed

S&F ceiling rose, surface, three terminals incl connection complete all as specified and as directed

Supply and fixing LED tube lights 4 feet fitting 1x 20W, 220V, Ac aluminium body connecting up with flexible copper conductor cable of suitable size from ceilingrose complete

Supply and fixing LED tube lights 2 feet fitting 1x 20W, 220V, Ac aluminium body connecting up with flexible copper conductor cable of suitable size from ceilingrose complete

Supply and fixing round shape 15 watt 220 volts AC recessed type/surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, cutting of sheet if any complete

S&F Sub main wiring with 2 runs of single core, 4 sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS quality) drawn through PVC conduit with fitting/accessories, fixed on roof, walls, ceiling etc including 4 Sqmm PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire complete as specified and directed. Note: Rate includes (i) PVCconduit and its accessories (ii) Two runs of cable and one run of earth wire of size 4 sqmm and including taking down of old U/S submain

S&F of MCB SPN DB 8 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail,230 Volts with double door including taking down old unsv DB and making the the surface good to match with adjucent complete all as specified and as directed

S&F of MCB SPN DB 4 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail, 230 Volts with double door including taking down old unsv DB and making the the surface good to match with adjucent complete all as specified and as directed

S&F of MCB VTPN DB 4 way IP-54 with bus bar 100A, neutral link, earth bar and Din rail,230 Volts with double door including taking down old unsv DB and making the the surface good to match with adjucent complete all as specified and as directed Note: The quoted rate shall include therate of MCCB 80A 16 KA ICS-100% ICU

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and Gl pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of Gl bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-1 incl RCC cover, watering arrangement with Gl pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete. Note: The quoted rate shall include protection pipe and wire upto 7.5 mtr

Supply and fixing amp rating 240V, 10KA B curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

SP 5 To 32 AMP

SPN 32 AMP

Supply, lay in replacement XLPE Insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of LT UG cable/poles etc in soft/loose soil and getting out complete all as specified.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point for any type of excavation.

M&L DWC pipe 50 mm dia to be lay in trench by passing cable complete all as specified and directed

M&L for cutting of road/ hard standing and making good with PCC (1:2:4) using 20mm graded stone aggregate complete all as specified.

P K ENTERPRISES (BID ID -3355863)

J.B.ENTERPRISES (BID ID -3357835)

AJINKYA VIKRAM GAIKWAD (BID ID -3358386)

R K Construction (BID ID -3358530)

Gauri Associates (BID ID -3358265)

PRANAV ENTERPRISES (BID ID -3357813)

DURGA CONSTRUCTION & TRANSPORT (BID ID -3358423)

M/s Asrani and sons (BID ID -3358195)

SHRINATH CONSTRUCTION (BID ID -3358548)