Upgradation of Handloom office Building Doda by way of renovation of office building and Construction of District store Showroom in the office premises of Assistant Director Handloom Doda

Amount

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material to the disposalsite/dumping ground as per direction of Engineer-in-charge

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth to the disposal site/dumping ground, as directed by Engineer-in-Charge. All kinds of soil

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriages complete Job.

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering and all carriages complete job. All work upto plinth level with

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriages complete job.

Providing & laying in position Reinforced cement concrete including curing, centring, shuttering, finishing with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages complete Job.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.(TMT bars)

Cement Plaster in fine sand 1:6 (1 cement : 6 fine sand ) 12mm thick complete

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

40 mm thick Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete job.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (1 mm thick)

Painting with synthetic enamel paint of approved brand and manufacture of required colour

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement Compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/lite

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Providing & fixing Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (size of tile = 600mm x 600mm)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Wire Make: Anchor/Havells/Vguard/Polycab Conduit Make: AKG/Anchor/Finolex/Polypack

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C Wire Make: Anchor/Havells/Vguard/Polycab/KEI Conduit Make: AKG/Anchor/Finolex/Polypack

Supplying and fixing PVC batten/ angle holder including connections etc. as required(Make: AKG/Anchor/Finolex/Polypack /Goldmedal)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make: VGuard/ Havells/ABB/anchor)

SINGLE POLE

SINGLE POLE AND NEUTRAL

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.( Make: Finolex/anchor/Vguard/Havells/KEI)

2 x 1.5 sq.mm

2 x 2.5 sq. mm

2 x 4 sq. mm

2 x 6 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make: AKG/polycab/Anchor/Polypack)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Make: Havells/ABB/Legrand/Anchor/vguard/L&T/Schneider)

5/6 amps switch

3 pin 5/6 A Socket

15/16 A switch

6 pin 15/16 A Socket

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.(Make: Havells/ABB/Legrand/Anchor/L&T/Schneider)

3 Module

6 Module

8 Module

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (Make: Havells/ABB/Legrand/Anchor/Schneider/Vguard)

Supply & fixing of 09/10 watt LED Bulb.(Make: wipro/panasonic/syska/crompton)

supply, Installation, testing and commissioning of exhaust fan with louvers of folowing size including connection,fitting complete erected in position etc as required.(250 mm sweep)(Make: VGuard/ Havells/Crompton/Usha/Anchor)

Supply & fixing of Pvc type 2pole MCB cover complete with all accessories as required.( Make: ISI)

supply,Installation, testing and commissioning of 1200 mm sweep ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.( Make: Panasonic/crompton/bajaj/havells)

Supply and fixing of fan box 5'' complete with accessories as required (Make: ISI)

supply & fixing of Fan D clamp in ceiling including all accessories as required.( make: ISI)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

MANZOOR AHMED NATNOO

aasim nisar

Ashrafa Begum

Mirza Ishtiaq Ahmed Beg and Sons

Asif Iqbal

Khalid Hussain Mehta