REPAIR REPLACEMENT OF INTERNAL WIRING, SWITCHES, SOCKETS DBS INCLUDING ELECTRICAL FITTINGS FIXTURES IN JCOS ORS MD ACCN UNDER GE EAST AGRA

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete and all as specified and removing from site.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FR PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FR PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and sunken box (incl modular) and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Make Polycab/Havells/RR Kablel/Grandlay. Note :Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light /fan point controlled by one switch

All as per item No 2 above but One 5 pin socket outlet 5 Amps on independent board

All as per item No 2 above but One 5 pin socket outlet 5 Amps on same board

All as per item No 2 above but One bell/ buzzer point controlled by one push button on the same board

All as per item No 2 above One light point controlled by two 2 - w a y s w i t c h e s

All as per item No 2 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FR PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FR PVC insulated unsheathed cable with proper colour coding drawn in existing PVC concealed conduit with all accessories and FR PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for sunken box and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Make Polycab/Havells/RR Kablel/Grandlay. (a) One light /fan point controlled by one switch

All as per item No 8 above but One 5 pin socket outlet 5 Amps on independent board

All as per item No 8 above but One 5 pin socket outlet 5 Amps on same board

All as per item No 8 above but One bell/ buzzer point controlled by one push button on the same board

All as per item No 8 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FR PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board/AC connection

Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed,multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulatorete including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following : - ( colour code to be followed). (a) One light /fan point controlled by one switch

All as per item No 13 above but One socket outlet 5 Amps 5 Pin on independent board

All as per item no 13 above but One socket out let 5 Amps 5 pin on same board

All as per item No 13 here in before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm all as specified and directed.

Supply and fix switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body all as specified and directed. Make : Plaza/Cona/Havells

Supply and fix Switch piano flush button single pole two way 5 amps 240 Volts with polycarbonate body all as specified and directed. Make : Plaza/Cona/Havells

Supply and fix Bell push flush button single pole one way 5 amps 240 Volts with polycarbonate body all as specified and directed. Make : Plaza/Cona/Havells

Supply and fix Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body all as specified and directed. Make : Plaza/Cona/Havells

Supply and fix socket 5 amps 5 pin flush type, 240 volts. with polycarbonate body. Make : Plaza/Cona/Havells

Supply and fix socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body all as specified and directed. Make : Plaza/Cona/Havells

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd, complete all as specified and directed. Make : Plaza/Cona/Havells

Supply and fix ceiling rose , PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals all as specified and directed. Make : Plaza/Cona/Havells

Supply and fix Lamp holder/angle holder insulated body with black/white plate for batten fittings all as specified and directed. Make : Plaza/Cona/Havells

Supply and fix in repair of LED Bulb 7 W, warm white all as specified and directed. Make : CG/Philips/Wipro

Supply and fixing in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. Make : CG/Wipro/Philips

Supply and fix in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as as specified and directed. Make : CG/Wipro/Philips

S&F sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x1.5 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x1.5 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC Conduit not less than 20 mm dia including dismantling of old unsv submain wiring complete all as specified and directed .Make Polycab/Finolex/RR Kablel/Grandlay

S&F sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x2.5 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x1.5 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC Conduit not less than 20 mm dia including dismantling of old unsv submain wiring complete all as specified and directed.Make Polycab/Finolex/RR Kablel/Grandlay

S&F sub Main Wiring with three single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC Conduit not less than 25 mm dia including dismantling of old unsv submain wiring complete all as specified and directed by Engineer-in-charge including taking down of existing un serviceable sub main wiring complete.Make Polycab/Finolex/RR Kablel/Grandlay

Supply and fixing in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, complete all as specified and directed. Make : Schneider/Hager/Legrand

Supply & fix in repair sheet metal enclosure Vertical TPN DB 4 way as per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 43 & IP 54 DB's, With provision for DPX³ 250 MCCB as incomer and SP/TP MCB's as outgoing, Complete all as specified and directed. Make : Legrand/Schneider (Acti-9)/Hager .

Supply & fix in repair sheet metal enclosure MCB distribution board vertical type. triple pole & neutral 415 volts 4 way with IP-43 protection double door suitable for including MCCB as incommer complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification all as specified and directed. Make : Legrand/Schneider (Acti-9)/Hager .

Supply & fix in repair sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed. Make : Legrand/Schneider (Acti-9)/Hager .

Supply & fix in repair sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified and directed. Make : Legrand/Schneider/Hager

Supply and fixing in repair MCB TPN 40 to 63 Amp rating 415V, 16KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Make : Legrand/Schneider/Hager

Supply and fixing in repair MCB SP 1 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed .Make : Legrand/Schneider/Hager

Supply and fix MCB isolator four pole 415 volts any rating 100 amps, with rupturing capacity 10 KA ` C' series, including providing thimble for out going cables. Make : Cat Pt No 4086 80 of Legrand/Schneider (Acti-9)/Hager .

Taking down ceiling fan/exhaust fan, cealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and directed

Refixing ceiling fan/ exhaust fan received from item No - 40 here in before and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel earth strip 25 x 4mm as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed.

Supply and fix 3 phase and neutral copper Bus bar chamber of 100 amps, complete fixing on walls/angle complete all as specified and directed.

Supply and fix in replacement Flame Retardant (FR) PVC casing caping of Size 25 mm x 16 mm (length 6 feet) , Ivory Colour, Unplasticised formulation for prolong storage or usage, double lock, ISI Marked as per IS 14927, Highly durability, Resistance to oil and grease, complete all as specified and directed. Make : Prestoplast/Polycab/Finolex

Supply and fix in replacement Flame Retardant (FR) PVC casing caping of Size 38 mm x 16 mm (length 6 feet) , Ivory Colour, Unplasticised formulation for prolong storage or usage, double lock, ISI Marked as per IS 14927, Highly durability, Resistance to oil and greasecomplete all as specified and directed. Make : Prestoplast/Polycab/Finolex

Supply and fix in repair LED tube Rod 20 watt, 220V, single side complete all as as specified and directed. Make : CG/Wipro/Philips

Supply and fix in repair of 5 Amp socket, 5 pin all as specified and directed. Make : Havells/Cona/Legrand

Supply and fix in repair Plug top 16 Amp ,3 pin, 240 Volt all as specified and directed. Make : Havells/Cona/Legrand

Supply and fix in repair Plug top 6 Amp ,3 pin, 240 Volt all as specified and directed. Make : Havells/Cona/Legrand

Supply and fix in repair switch socket combination16 Amp , 240 volt with Box all as specifeid and directed. Make : Havells/Cona/Legrand

Supply and fix in repair switch socket combination 6 Amp , 240 volt with Box all as specifeid and directed. Make : Havells/Cona/Legrand

Supply and fix in repair piano switch 6 Amp , 240 volt all as specifeid and directed. Make : Havells/Cona/Legrand

Supply and fix in repair piano switch 16 Amp , 240 volt all as specifeid and directed. Make : Havells/Cona/Legrand

Supply and fix in repair Electronic fan regulator step type, AC, 230V all as specified and directed. Make : Havells/Cona/Legrand

Supply and fix in repair 16 Amp socket, multipurpose as specified and directed. Make : Havells/Cona/Legrand

S&F in repair of 20 Amp 3 pin socket for metal clad box all as specified and directed. Make : Havells/Cona/Legrand

S&F in repair of 20 Amp 3 pin plug top for metal clad box all as specified and directed. Make : Havells/Cona/Legrand

Supply and fix in repair modular switch piano single pole, two way 6 Amps 1 module. Make : Legrand/Schneider/Hager

Supply and fix in repair modular switch piano flush type 16 Amps single pole one way, one module. Make : Havells/Cona/Plaza/Legrand

Supply and fix in repair modular socket outlet 2/3 pin 6 Amps combined 2 module. Make : Havells/Cona/Plaza/Legrand

Supply and fix in repair modular socket multipurpose 3 pin 6/16 Amps combined 2 module. Make : Havells/Cona/Plaza/Legrand

Supply and fix in repair modular cover plate with metal frame (inner and outer) 1 module for mounting switch and sockets. Make : Havells/Cona/Plaza/Legrand

Supply and fix in repair modular cover plate with metal frame (inner and outer) 2 module for mounting switch and sockets. Make : Havells/Cona/Plaza/Legrand

Supply and fix in repair modular cover plate with metal frame (inner and outer) 3 module for mounting switch and sockets. Make : Havells/Cona/Plaza/Legrand

Supply and fix in repair modular cover plate with metal frame (inner and outer) 6 module for mounting switch and sockets. Make : Havells/Cona/Plaza/Legrand

Supply and fix in repair modular cover plate with metal frame (inner and outer) 8 module for mounting switch and sockets. Make : Havells/Cona/Plaza/Legrand

Supply and fix in repair blank spacer plate for single module. Make : Havells/Cona/Plaza/Legrand

Supply and fix in repair ceiling rose , 3 phase/PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals all as specified and directed. Make : Havells/Cona/Legrand

S&F in repair of Hylam sheet of size 4x4 all as specified and directed.

S&F in repair of Hylam sheet of size 5x5 all as specified and directed.

S&F in repair of Hylam sheet of size 8x5 all as specified and directed.

S&F in repair of Hylam sheet of size 10x 12 all as specified and directed.

S&F in repair of sunk in cast iron/Pressed steel terminal box of size 4"x3", 60 mm deep & 1.6 mm thick duly painted with aluminum inside and anticorrosive paint out side/PVC polycarbonate PVC rectangular block 50 mm deep, including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications, complete all as specified and directed.

S&F in repair of sunk in cast iron/Pressed steel terminal box of size 5"x5", 60 mm deep & 1.6 mm thick duly painted with aluminum inside and anticorrosive paint out side/PVC polycarbonate PVC rectangular block 50 mm deep, including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications, complete all as specified and directed.

S&F in repair of sunk in cast iron/Pressed steel terminal box of size 8"x6", 60 mm deep & 1.6 mm thick duly painted with aluminum inside and anticorrosive paint out side/PVC polycarbonate PVC rectangular block 50 mm deep, including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications, complete all as specified and directed.

Supply & fixing in repair MCCB 63 amps, 4 pole, breaking capacity 16 KA, 415 volts, AC including taking down old unserviceable MCCB, complete all as specified & directed. Make : Legrand Cat Pt No 4200 13 or equivalent in Schneider (Acti-9)/L&T/Hager .

Supply & fixing in repair MCCB 100 amps, 4 pole, breaking capacity 16 KA, 415 volts, AC including taking down old unserviceable MCCB, complete all as specified & directed. Make : Legrand Cat Pt No 4200 15 or equivalent in Schneider (Acti-9)/L&T/Hager .

S&F in repair of PVC surface mounting plastic box (4x3.5) for 15 Amp switch socket combination all as specified and directed.

S&F in repair Decorative wall light fixture made up of Polycarbonate, suitable for 9/10W LED bulb alongwith 9W, complete all as specified and directed. Make: Havells Cat No LHFHCHE1TL1W020 or equivalent in Bajaj / Philips/CG

S&F in repair Decorative gate light (GLOBE LIGHT) made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base.alongwith 5W LED Bulb, complete all as specified and directed. Make: Wiproj / Philips/CG

Supply and fixing in repair post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make : Wipro/Philips/CG

H.S.Kochhar n Sons

TRIVENI ASSOCIATES

M/S Mamta Electricals

M/s S. K. Construction Co.

S S TRADERS

MNR ASSOCIATES

jmd engineers