Renovation of type IV quarter no G 35 Servant accommodation at Goal Ghar Port Blair Sw Providing IEI and EEI including power back up

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group B

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing the following module Plastic Surface box (Make: Legrand, Model: Mylinc or equivalent) along with suitable modular plate (white ) with frame (Make: Legrand, Model: Mylinc or equivalent) for modular switches in recess etc. as required.

1 module

2 modules

3 modules

6 modules

8 (4x2) modules

9 modules

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outlet

Bell push

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

Supplying and fixing of 12W LED recessed downlight CDL/NW/WW with die cast aluminium housing with minimum efficacy of 100 lm/w ( Make: Crompton, Model: Pearl Ultima-S, Cat No.: LSCSM-12W-CDL/LSCSM-12W-NW/LSCSM-12W-WW or equivalent) including connection etc. as required.

Supplying and fixing of 18W LED recessed downlight CDL/NW/WW with die cast aluminium housing with minimum efficacy of 100 lm/w ( Make: Crompton, Model: Pearl Ultima-S, Cat No.: LSCSM-18W-CDL/LSCSM-18W-NW/LSCSM-18W-WW or equivalent) including connection etc. as required.

Supplying and fixing of LED Wall/Mirror Light, CDL having minimum 1350 lumen at a maximum wattage of 17 W( Make: Philips, Model: Ultron, Model No.: 48027 Slim Wall or equivalent) including connection etc. as required.

Supplying and fixing of LED Bulk Head of wattage between 9 W/ 10 W with PDC housing and IP65/ IP66 Protection, CW/NW/WW (Make:-Philips, Model : Endura or equivalent ) including connection etc. as required.

Supplying and fixing of Indoor Wall Light suitable for 1xE27 LED lamp ( Make: Philips, Model : Grandeur Wall Light, Model No. : 58071 or equivalent ) with 4 W, E27 LED lamp, CDL/WW ( Make : Make: Philips or equivalent) including connection etc. as required.

Supplying and fixing of 3.5W LED Indoor Wall Light ( Make: Philips, Model : Caiques, Model No. : 17302/30 or equivalent ) including connection etc. as required.

Supplying and fixing of Indoor Wall Light suitable for 1xE27 LED lamp ( Make: Philips, Model No. : 37934/06 or equivalent ) with 4 W, E27 LED lamp, CDL/WW ( Make : Make: Philips or equivalent) including connection etc. as required.

Supplying and fixing of 7.5W LED Indoor Wall Light ( Make: Philips, Model No. : 40947 Dew or equivalent ) including connection etc. as required.

Supplying and fixing of Indoor Wall Light suitable for 1xE27 LED lamp ( Make: Philips, Model : Roseate Wall Light 1H, Model No. : 58135 or equivalent ) with 4 W, E27 LED lamp, CDL/WW ( Make : Make: Philips or equivalent) including connection etc. as required.

Supplying and fixing of 15W LED Indoor Wall Light ( Make: Philips, Model : Oriel Next Wall Light, Model No. : 34143 Jal Dim or equivalent ) including connection etc. as required.

Supplying and fixing of Suspension Light suitable for 1x E27 LED bulb ( Make: Philips, Model : Tawny Pendant Suspensionl Light, Model No. : 58127 or equivalent ) including connection etc. as required.

Supplying and fixing of 25 W LED Suspension Light, WW ( Make: Philips, Model No. : 40902 or equivalent ) including connection etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing of 12W, B22 LED lamp (CDL/WW( Make : Philips or equivalent ) on the existing batten/angle holder

Supplying and fixing Electronic Door Bell suitable for single phase, 230 V (Make: Philips, Model: Smart Harmony, Model No.: 913713825601 or equivalent ).

Supplying, installation, testing and commissioningof LED box type batten suitable for single TLED lamp (Make:- Philips, Type: TMC 501 P 1xT- LED 22W P3241 or equivalent) with a 18 watt LED T8 tubelamp with PC body ( Make:- Philips, Model: MAS LED tube 18W 1800lm 865 T8 or or equivalent) directly on ceiling/wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.complete with all accessories etc. as required.

Supplying, installation, testing and commissioning of 1 star rated energy saving A.C. ceiling fan (metalic) of 1200 mm sweep of approved colour with all accessories as required ((Make: Usha, Model: Nabila or equivalent )) including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing 100 W, Fan Regulator Rotary Step with 360 degree rotation - 2 module ( Make: Legrand, Model : Mylinc , Cat No. : 6759 64 or equivalent) on the existing switch board including connections etc. as required.

Supplying and installing exhaust fan of 300mm sweep (Metallic) (Make: Crompton, Model-Drift Air Plus or equivalent) in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supplying and installing exhaust fan of 250 mm. sweep (Non Metallic ) (Make: Crompton, Model-Ventilus or equivalent) in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supplying and installing exhaust fan of 200 mm. sweep (Non Metallic ) (Make: Crompton, Model-Ventilus or equivalent) in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying of Wall Fan of 400mm sweep (Make: Bajaj, Model: Midea BW07 or equivalent).

Supplying of Pedestal Fan of 400mm sweep (Make: Bajaj, Model: Midea BP07 or equivalent)

Supplying & fixing of 25A Modular AC Box with 25 A SP MINI MCB in plastic enclosure including connections etc. as required (Make : Anchor, Model : Uno, Code : 98496 or equivalent).

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way (4 + 24), Double door

"Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying, installation, testing and commissioning of Instantaneous Electric Water Heater of capacity 3Ltr./3KW (Make:- Havells, Model: Instanio, Product Code: .GHWAIAPWB003 or equivalent ) complete with all accessories etc. as required.

Supplying and laying of DWC HDPE pipe of size 63 /50 ( in mm ), ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 16203 ( Part 24 ), 2018 ( Old IS 14930, Part 2,2001) complete with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

Supplying and laying of DWC HDPE pipe of size 63 /50 ( in mm ), ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 16203 ( Part 24 ), 2018 ( Old IS 14930, Part 2,2001 ) complets with fitting and cutting, jointing etc. direct in ground (50 cm below ground level including hard surface) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

Supplying and fixing DWC HDPE pipe of size 63/50 (in mm ), ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 16203 ( Part 24 ), 2018 ( Old IS 14930, Part 2,2001 ) complete with fitting and cutting, jointing etc. on surface/wall including providing clamping arrangement etc. as required.

Supplying and fixing DWC HDPE pipe of size 63/50 (in mm ), ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 16203 ( Part 24 ), 2018 ( Old IS 14930, Part 2,2001 ) complete with fitting and cutting, jointing etc. on existing pole including providing clamping arrangement etc. as required.

Supplying and laying of DWC HDPE pipe of size 63/50 (in mm ), ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 16203 ( Part 24 ), 2018 ( Old IS 14930, Part 2,2001 ) complets with fitting and cutting, jointing etc. directly on surface as required

Supplying and laying of DWC HDPE pipe of size 50/38, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS IS 16203 ( Part 24 ), 2018 ( Old IS 14930, Part 2,2001 ) complets with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

Supplying and laying of DWC HDPE pipe of size 50/38, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS IS 16203 ( Part 24 ), 2018 ( Old IS 14930, Part 2,2001 ) complets with fitting and cutting, jointing etc. direct in ground (50 cm below ground level including hard surface ) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

Supplying and laying of DWC HDPE pipe of size 50/38, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 16203 ( Part 24 ), 2018 ( Old IS 14930, Part 2,2001 ) complets with fitting and cutting, jointing etc. directly on surface as required.

Supplying of 6 sq.mm., 2- core XLPE insulated armoured LT power cable of 1.1kV grade with aluminium conductor (Make: Havells or equivalent).

Supplying of 35 sq.mm., 3.5 core XLPE insulated armoured LT power cable of 1.1kV grade with aluminium conductor(Make: Havells or equivalent).

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing DWC pipe as required. a) Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on surface as required. a) Upto 35 sq. mm

Supplying of fabricated metallic pole of length of 6.0 meters made out of 80 mm. dia. G.I pipe of length 3.00 mtrs and 65 mm. pipe dia. G.I. pipe of length 3.00 mtrs. having single arm made out of 40 mm. dia. G.I. pipe of length 0.8 mtrs. for fixing Street Light and provision for fixing Cable Junction Box , painting with water proof paint of approved colour over a coat of metal primer etc. including cost of materials, labour etc. as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

a) Above 4.5 metre and upto 6.5 metre

Supplying and fixing of Cable Junction Box, IP 66/69 "weather proof for outdoor intallations (with plain walls) (Make : Hensel, Cat No. : KF 0600 H or equivalent ) with a two pole connector on the existing light pole..

Supplying and fixing of Cable Junction Box, IP 66/69 "weather proof for outdoor intallations (with plain walls) (Make : Hensel, Cat No. : KF 1000 H or equivalent ) with a two pole connector and 6 A MCB, on the existing street light pole.

Supplying of 35 watts LED Street light luminaire with PDC housing , IP65 with minimum efficacy of 100 lum/w ( Make: Philips, Model : BRP050 LED 036 CW R1 MF PC S1 PSU GR or equivalent).

Installation, testing and commissioning of Street Light fitting of all types on the existing Pole complete including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying, installation, testing and commisioning of 8W LED Bollard Light (Make: Philips, Model : Robin Post Light, Model No. : 15473/30/16 or equivalent ) including erection with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) having 0.3mx0.3mx0.4m below ground level and 0.2m x 0.2m x 0.3m above ground level, connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, screws, earthing etc. as required.

Supplying, installation, testing and commissioning of 25W LED Gate Light (Make: Havells, Model : Ruby Clear, Item Code : RUBYPT 25WLED830SSYMTOPC or equivalent ) including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. as required.

Earthing with ASHLOK make SEE brand Safe Earthing Electrode, Type- 19, 50 mm dia., length 2.00 mtrs. or equivalent by filling inner space with 50 Kg Electrodite (Back Fill Compound ) required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc.as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer, excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia PVC. pipe ( Medium Class ) including clamping the pipe etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying, installation, testing and commisioning of 2.0 KVA , 24 V UPS with Sine Wave technology (Make: Luminous, Model: Power X 2250 or equivalent) with 02 Nos..12V, 200 AH tubular battery (Make: Luminous, Model : Inverlast ILTT 24060 or equivalent) and suitable trolley to accommodate two tubular batteries (Make: Luminous, Model : TX200L or equivalent) including providing connections, cost of materials, labour, T&P etc. as required.

NAVJEEVAN ENTERPRISES

DAYAL HALDER

M/s Island Sales Enterprises

M/s Sameer Decorative Corner

POWER ENGINEERING CO

JOY GURU ENTERPRISES

M K ENGINEERING

M/s Sai Electrical Works

RAVI RAJ ELECTRICALS

M/s G K Construction