Loading
Loading…
Loading…
Tender Value
₹10.1 L
EMD Value
₹20,187
Closing Date
15 Jun 2026, 6:00 pm
Executive Engineer PHED Division Malpura
Executive Engineer PHED Division Malpura
Construction and Commissioning of 3 nos 150mm dia.Single Phase Tubewell with PVC tank At village Baori, Ban ka kheda,(Naga dhani)Kookar under block Todaraisingh District Tonk
2026_PHCJA_564929_1
EE PHED DIV MALPURA 49/2026-27
Open Tender
Civil Works - Water Works
20 days
Executive Engineer PHED Division Malpura
As Per Tender Document
3 documents required · 3 mandatory
₹1,000
Executive Engineer PHED Division Malpura
₹20,187
Yes
4 Jun 2026
4 Jun 2026
16 Jun 2026
4 Jun 2026
15 Jun 2026
4 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe. | ||||||
| 1.01 | Nominal bore 150 mm dia. | 300 | Mtr | 726 | ₹2,17,800 | BI01010001010000000000000515BI0100001113 |
| 1.02 | Add 15% extra on above item for drilling depth beyond 100 mtr, If depth of bore is more than 100 mtr. | 120 | Mtr | - | - | BI01010001010000000000000515BI0100001114 |
| 2Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes | ||||||
| 2.01 | 150 mm dia NB(Thickness of pipe 5.0 mm & mass of tube 20.13 Kg/m) | 45 | Mtr | 1,933 | ₹86,985 | BI01010001010000000000000515BI0100001116 |
| 3Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. | ||||||
| 3.01 | 150 mm dia | 3 | Each | 812 | ₹2,436 | BI01010001010000000000000515BI0100001118 |
| 4 | Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. | 3 | Each | 696 | ₹2,088 | BI01010001010000000000000515BI0100001119 |
| 5Supply & Installation of single phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. | ||||||
| 5.01 | Above 2.0 KW | 6.72 | KW | 13,050 | ₹87,696 | BI01010001010000000000000515BI0100001121 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.47 MB
Tendernotice_2.pdf
PDF • 2.26 MB
BOQ_1005446.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid