Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 LAccepted-Finance | ₹3.1 L | L1 | Accepted-Finance Lowest Rate Quoted Bidder. |
| 2 | L2₹3.4 L+₹27,283.12 (8.70%)Accepted-Finance | ₹3.4 L+₹27,283.12 (8.70%) | L2 | Accepted-Finance Rate Quoted Higher than L1 Bidder |
| Sl No | Description | Qty | Unit | M.A.SIRAJUDEEN & CO L1 | S.Amithapatchan L2 |
|---|---|---|---|---|---|
| 1.00 | Manufacturing and supply of E-counter table arrangements with the following specifications.The size of the counter table is (.90x.85)m to an overall hieght of 1.20m from floor level including counter partition arrangements. The counter is to be made of 19mm thick plywood both side mica sheet drawer including cutting to the required size with keyboard arrangements & including provision of 12mm thick glaze partition above table top with counter open arrangements Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before useetc., complete complying with standard specifications and as directed by the departmental officers. The rate includes cost of materials, labour charges, transport ,conveyance, loading and unloading charges etc., complete. | 21.74 | Sqm | 11,150.32 ₹2,42,407.96 Lowest | 12,100 ₹2,63,054 |
| 2.00 | Renewal by Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.(SD-347)(Computer plug, 15A Plug) | 25 | Mtr | 160.37 ₹4,009.25 Lowest | 180 ₹4,500 |
| 3.00 | Renewal by Supply and fixing of 3Nos.5A(3pin and 2pin)combined flush type wall socket with control switches open on wall insuitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket)(DATA-8) | 6 | Nos | 488.22 ₹2,929.32 Lowest | 550 ₹3,300 |
| 4.00 | Supplying ‘S' Type Chair with Continuous arms with Plastic cane knitted on teakwood frame seat/ back with 1’ outer dia tubular pipe of 14 gauge thick with inner fitting (Heavy Chair). Model No: SM-10 with colour of cane cream with wooden frame and handle of Natural colour polish finish. | 6 | Nos | 2,731.03 ₹16,386.18 Lowest | 3,000 ₹18,000 |
| 5.00 | GST 18 % | 1 | No | 47,831.89 ₹47,831.89 Lowest | 51,993.72 ₹51,993.72 |
Tender Value
₹4.0 L
EMD Value
₹4,000
Closing Date
18 Sept 2026, 3:00 pmClosed
Executive Engineer,Building C and M Division,Theni
O/o Executive Engineer, PWD, Building C and M Division, Near collectrate, Theni District
Providing Counter facilities for implementation of e-Seva Kendra (e-Court project) in the Combined Court Building Campus at Lakshmipuram in Theni District.
2026_PWD_700772_1
6EE-1-Buildings (CandM) Division-Theni-2026-2027- Dt.02.09.2026
Open Tender
Civil Works - Buildings
Lump-sum
30 days
lakshmipuram village, periyakulam taluk
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹4,000
18 Sept 2026
3 Sept 2026
18 Sept 2026
3 Sept 2026
18 Sept 2026
3 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Manufacturing and supply of E-counter table arrangements with the following specifications.The size of the counter table is (.90x.85)m to an overall hieght of 1.20m from floor level including counter partition arrangements. The counter is to be made of 19mm thick plywood both side mica sheet drawer including cutting to the required size with keyboard arrangements & including provision of 12mm thick glaze partition above table top with counter open arrangements Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before useetc., complete complying with standard specifications and as directed by the departmental officers. The rate includes cost of materials, labour charges, transport ,conveyance, loading and unloading charges etc., complete. | 21.74 | Sqm | - | - |
| 2 | Renewal by Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.(SD-347)(Computer plug, 15A Plug) | 25 | Mtr | - | - |
| 3 | Renewal by Supply and fixing of 3Nos.5A(3pin and 2pin)combined flush type wall socket with control switches open on wall insuitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket)(DATA-8) | 6 | Nos | - | - |
| 4 | Supplying ‘S' Type Chair with Continuous arms with Plastic cane knitted on teakwood frame seat/ back with 1’ outer dia tubular pipe of 14 gauge thick with inner fitting (Heavy Chair). Model No: SM-10 with colour of cane cream with wooden frame and handle of Natural colour polish finish. | 6 | Nos | - | - |
| 5 | GST 18 % | 1 | No | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_842607.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
BOQ_842607.xls
BOQ • 0.34 MB
TENDERDOCUMENTLAKSHMIPURAM.pdf
Tender Documents • 1.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .