Provn of road furniture at JNE area under GE (North) Udhampur

Amount

Delineators made of ABS plastic fitted with two nos. 65 mm dia highly reflective reflectors made of PMMA on both sides of the post and mounted on mild steel pipe of 65 mm duly powder coated height 1000mm, anti rust etc including fixed in PCC block (size 30x30x30 cm) of PCC 1:2:4 Type B-I, complete all as specified and as directed by Engr-in-Charge. Note : Cost of PCC and earth work is deemed to be included in unit cost.

Waterproof energy saving and Eco friendly DHRUV solar Road Stud made out Solid aluminium alloy shell powered by solar cells and panels . Ideal signal product for highways , parking lots , roads and similar isolated or stand alone traffic applications. Note : Aluminium Alloy shell with Solar Panel mono crystalline solar 2 . 4V / 0 . 3 watt and One Ni-MH or Nicd rechargeable battery with Six super bright LEDs in Colour Yellow , red , blue , green and white , Size - 125mmx125mmX25mm with shank of 56.8mm complete all as specified.

Convex mirror of 1000mm dia, made of polycorbonate material provided with 75mm dia mild steel medium weight pipe post of 108m high, duly powder coated fixed on ground with PCC 1:2:4 type B-1 of block size 60x60x60 cm including earth work & removing excavated soil to a distance not exceeding 50m, complete all as specified as directed by Engr-in-Charge.

Cat eye of size 110 mm x 120mmx24mm made of Aluminium, two reflectors fitted in the body, weight of cat eye 435 gm approx, designed for dynamic loads, complete all as specified and as directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface as in any type of soil, complete all as specified and as directed by Engr-in-Charge.

Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete, complete all as specified and as directed by Engr-in-Charge.

Stainless steel pipe of schedule 5 S of bore not less 60mm & wall thickness 1.6mm for sign boards complete all as directed.

Informatory sign board in required size and each sign board made of two 4mm thick aluminium composite panel ( ACP ) bothside face to fully covered with 3M scotchlite brand Intensity Prismatic grade retro - reflective sheeting as per ASTM D 4956 Type IV in required colour . The reflective sheet be cut by computerised plotter or digital printed on retroitatioti sheet with high quality eco solvent digital Roland and fabricated out of high intencity prismatic grade sheeting with text matter ( as required ) and border of same sheeting sign board shall be supplied along with supported circular hollow stainless steel section frame of size 25mmx 25mmx 1.29mm thick along with proper clamping with same section of stair nut bolts / welding complete all as specified.

Preparation of any type of road surfaces by scratching old spots, paints, trading oils greasy spots etc. and applying Thermo Plastic road marking paints as side, side lines of white/yellow colour of width upto 100mm conforming to Ministry of surface Transaport (MORTH) specification for the road and bridge work : 3rd revision, over primer as per manufacturers instructions including glass beads (intermix) type I (most/BS6008A) and provision contained in IRC-35-1997, complete all as specified and directed by GE/Engr-in-Charge. Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm.

kerni electricals

SINGH CONST CO

NATIONAL ROAD BUILDERS