Kerpai to Kachalekha_Road_Bush cutting,WMM in patches,Primer,Tack coat, PMC and SC_0.000 to 0.600

Clearing grass and removal of rubbish up to a distance of 50 metres out side the periphery of the area with all cost conveyance royalty, taxes of the materials and labour with T&P required for the work etc. complete or as directed by the Engineer-in-charge.

Conveying from spreading H.G. metal 45 mm size for patch or pot hole repairs and consolidation with H.R.R. or rammers, crusher screening / gravelling and sand binding, etc. complete inluding cost and conveyance of metal, crusher screening / moorum and sand complete as directed by the Engineer-in-charge.

Providing and applying Primer coat with bitumen emultion on prepaired surface of granular Sub-base including clearing of road surface & sparying primerat the rate of 06 kg/sqm using mechanical means as per clause 502 of MOSRTH Specification for road and bridge works (4th revision) with all cost conveyance royalty, taxes of the materials and labour with T&P required for the work etc. complete or as directed by the Engineer-in-charge.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision) with all cost conveyance royalty, taxes of the materials and labour with T&P required for the work etc. complete or as directed by the Engineer-in-charge.

Labour for laying 20mm thick premix carpet using 0.27cum of 13.2mm to 5.6mm size crushed stone chipping and 14.60kg. penetration grade of bitumen for 10sqm including hand packing to proper camber and consolidation with PRR including hire and running charges of PRR, hot mix plant, bitumen boilers and all other T & P articles but including cost and conveyance of chips and bitumen complete as per specification and direction of the Engineer-in-charge

Labour for laying 6mm thick precoated seal coat Type-B using 0.06 cum of 6.7mm size chips as per sieve analysis and 6.8Kg of bitumen per 10sqm.including hire and running charges of PRR, hot mix plant, tar boiler and all other T&P articles including cost and conveyance of chips and bitumen complete as per specification and direction of the Engineer-in-charge

Conveying from stacks spreading moorum on road surface watering and rolling with PRR etc with all cost conveyance royalty, taxes of the materials and labour with T&P required for the work etc. complete or as directed by the Engineer-in-charge.