Providing of Park and Footpath at Ganapathy Maa Nagar 3rd Block in Ward No.20 North Zone

Cleaning the light jungle etc completed as per direction of officers

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 c.u.m. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge.

Plain cement Concrete in1:4:8 mix (one cement, four sand, eight metal) using 40mm size Hard Broken stone as per the direction of departmental officers etc., complete

Supplying fabrications and placing in position RTS rods in various dia including cutting and bending tying of grills placing in position binding wire etc. completed

Centering with steel shutters including studding with sides and support etc., as per the direction of departmental officers etc., complete

Reinforced Cement concrete 1:1.5:3 mix (one cement, oneand half sand, Three metal) using 20mm size hard broken stones from approved quarry complying with standard specification

Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard

Filling with Well gravel layer by layer cost including watering and consolidations etc. complete as per the direction of departmental officer

Supplying and fixing of design grill main gate including cost and conveyance of all labour and material charges ..etc. complete

PLASTERING with cement mortar 1:5 (one cement and five sand by volume) 12mm thick for all internal/external surfaces like super structure, rainwater, ducts, elevation in all floors complying with standard specifications.

Painting with first quality emulsion paint two coats over a priming coat including thorough cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed

Painting with enamel paint two coats over base coat for new iron works using good quality and approved colour etc. completed.

Collection and supply of river sand and silt including transport etc complete

Supplying and Laying Rubber Moulded Hydraulic Pressed Paver Block Providing and laying of 83 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

S/fixing of swing two seater with bit of 8'-0" above GL using 50mm dia ms pipe 9swg with 3.65mm on wall thick with one coat of primer and to coats of enamel paint and seat using with paddale wood with polishing

S/fixing of slide ladder park model using 16g MS sheet for sliding 8'-0" support pipe 40mm dia MS pipe 10 swg 3.25 mm wall thick ladder using 25mm L angle for sliding support hand rails using 25mm sq.rod and platform frame using 40mm L angle with one coat of primer and two coat of enamel paintinf etc

S/fixing of jungle jim pipe 40mm dia MS pipe 10 swg 3.25 mm wall thick running three horizontally and vertically on each side finishing one coat of primer and two coat of enamel paint of approved colour aa per instruction of departmental officers

S/F of twin sea saw two seater of 6'-0" length and 4'-0" height using 50mm G.I. pipe with two coats of enamel paint over one coat of primer and platform using 1" paddale wood with polish as per direction of departmental officers.

Supply and fixing of steel benches including moulding charges etc complete

Supply of border plants including maintenance for 3 months as per direction of departmental officers

Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and run of 2 of 1.5sq.mm. PVC insulated SC unsheathed FRL Scopper conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour