Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹7.2 L+₹55,094 (8.31%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹9.1 L+₹2.5 L (37.5%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹8 L
EMD Value
₹16,000
Closing Date
9 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (R)
AGE (I) CIF (R) C/O 56 APO
REPAIR AND MAINT TO PLASTERING, FLOORING, CEILING, PAINTING, PLUMBING AND SANITARY FITTING, EXTERNAL ELECTRICAL SERVICES AND ALLIED WORKS IN CERTAIN BLDGS OF TA UNDER AGE (I) CIF (R).
2022_MES_536755_1
AGE(I)/R-14/2022-23
Open Tender
Civil Works
Item Rate
180 days
AGE (I) CIF(R)
Class E and above and category a (i)
8 documents required · 8 mandatory
₹500
AGE (I) CIF (R)
₹16,000
Yes
22 Sept 2022
9 Jul 2022
11 Aug 2022
9 Jul 2022
9 Aug 2022
25 Jul 2022
60 days
Amount
M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
Dismantling of mild steel or wrought iron work of any description not otherwise provided for complete all as specified.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240,complete all as specified and as directed.
S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.
S&F 8 mm thick pvc insulation panels with EPS stuck to 1 mm printed pvc sheet suitably placed in false ceilling grid made of aluminium /GI/M.S as per specification and drawings directed by Engineer-in-charge.
M&L labour 8 mm thick pvc wall linning consisting of 1 mm thick wood grain printed pvc sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications and drawing duly fixed with wall as directed by Engineer-in charge.
S&F 7 mm thick Gypsum tile colour touch sizing 595x595 mm with La Gyp T bar metal profile manufactured from high quality galvanised steel main runner 24x33 mm thickness 0.3 mm , cross runner 24x25 mm ,thickness 0.3 mm ,wall angle 18x18 malong with other system components accesseries such as butterfly clip 0.5 mm thick hold down clip 0.4 mm thick and duly suspended with GI bar hangers by royal plugs etc and necessary drilling etc as per manufacurers instructions, complete all as specified and directed by Engineer-in-charge.
S&F for anodised aluminium frame powder coated (minimum thk of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, anodised aluminium snap on beading for fixing glass panel etc. complete all as specified or as directed.
M&L 12 mm thick prelaminated particle board , interior grade, prelaminated both side with decorative choice lamination fixed in repairs with screw to timber frame work complete all as specified and directed by Engineer-in-charge.
M&L 6 mm dia anodised aluminium decco grills, 100 mm apperture of hexagonal design and pattern as approved by AGE complete all as specified and directed.
Taking down cement plaster on brick wall or concrete surfaces of ceilling etc incl racking out joints hacking for key scrubbing down with water etc. complete all as spd & directed.
M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces including fin facia in cm 1:4 finished even and smooth without using extra cement complete all as specified & directed on external surfaces .
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge.
Preparation of new plastered surfaces of wall and applying two coat of cement base paint, complete all as specified and directed.
S&F in repairs vitreous China wash basin, white or in matching colour of tiles , flat back, size 550x450 mm excluding taps,but including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long( Minimum), chain and plug and porcelain stopper, brackets for fixing any size, including cutting for and pinning in ends of brackets or erecting stand as directed by Engineer-in-Charge
S&F in repair corner sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf size not less than 300x300x70 mm with chromium plated brackets guard and railing complete all as specified and directed.
S&F in repair corner sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and directed.
S&F in repairs stainless steel tumbler holder and soap case with toothbrush stand fitting with screws and nails complete all as directed.
S&F in repairs stainless steel folding towel rack (size 18 inch round) with swivel towel bar with towel hooks design fitting with screws and nails complete all as directed.
S&F in repair PVC soap dispenser of capacity 250 ml shower lotion/gel/liquid shampoo etc with pump ,mirror finish fitting with screws and nails complete all as directed.
S&F cabinet pvc size 510x490x100 mm with looking mirror 1/2 openable door as per approved by the Engineer-in-Charge
S & F in repair 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane.
Prepration of new or previously steel surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint/camouflaged pattern, complete all as specified and directed.
S&F in repair Brass CP mixer wall/WHB for mixing hot&cold water screwed down for iron pipe and fixed to 15mm bore pipe.
S&F Pillar taps,fancy type, cast copper alloy 15 mm bore, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as specified and directed
Supply and fix in CP stop cock/angle valve fancy type cast copper alloy screwed down high pressure ,with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm bore complete all as spd & directed
S&F 500 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including all accessories includind dismantling of old water storage tank, complete all as specified and directed.
Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 15mm boe iron pipe and fixed in repair. (Minimum weight 15mm-142gms/ 2 0 m m)
Supply and fix in repair 10 ltrs capacity PVC symphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets, fush pipe of polyethylene of low or high density or PVC. 32 mm dia, complete all as specified and directed.
Supply and fix in repair Vitreous China squatting pan orissa pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe, complete all as specified & directed.
S&F in repair 15 mm size ISI marked CP health faucet premium brass with 1.5 m connection tube&hook,complete all as specified and as directed.
S&F in repair PVC connection 15 mm dia with PTMT nuts of length 450 mm complete all as specified.
S&F in repairs of seat cover for pdestal pan,complete all as specified and as directed.
Supply and fix in repair bib taps (long body), cast copper alloy with copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore pipe.
S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified
S & F brass chromium plated shower rose 125 mm size with or without swivel joint including fixing to steel pipe or union.
S&F Plate rack made of stainless steel 1.00 mm thick of size 600 mm (ht) x 900mm (width) fixed to wall with and including nuts & bolts of suitable size for fixing in wall complete all as specified and directed.
Excavation in trenches in any type of soil not exc 1.5m wide and n.exc 1.5m in depth for electric poles stay foundation and under ground electric power cables and getting out, complete all as specified and directed.
Excavation in trenches exc 1.5 mtr wide and exc 1.5 m depth and getting out in any type of soil for laying UG cables and foundation of poles of various sizes, complete all as specified and directed.
Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm complete all as specified.
Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.
M & L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate for coping of pole around pole and filling in road cuts/ hard standing/ Bitumen all as specified and as directed by Engineer-in-Charge.
M & L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate for base foundation of pole all as specified and as directed by Engineer-in-Charge.
M & L for PCC (1:3:6) type C1 using 20 mm graded stone aggregate for foundation of pole around pole all as specified and as directed by Engineer-in-Charge.
Supply and erection in truely vertical position steel tubular swaged poles, type 410 SP-31 (9.00 meters) with 300 mm x 300 mm x 6 mm mild steel base plate continuously welded to poles, finial taper plug, bolts, nuts and screws all as specified including factory painted with two coats of black bituminous paint internally through out and externally for embedded portion and making 30 cms wide strips with yellow and black paint at alternatively upto 1.50 metre height and applying two coats of aluminium paint over a coat of red oxide primer on remaining exposed surface after erection including taking down of old unserviceable existing pole any size any type ,complete all as specified and directed by the Engr-in-Charge.
S&F in repair Aluminium conductor, steel reinforced of any size on LT Poles including straining,binding with insulators with Al/copper binding wire with insulators as in over head conductors, providing PVC Sleeves for jumper fixed as in repairs, complete all as specified and directed.
M&L in replacement of Galvanised steel wire 3.15 or 4mm dia,complete all as specified and directed.
Supply and fix in replacement of stay assembly galvanised iron complete with accessories stay rod 20 mm dia, 180cm long with two nuts, stay bow 14mm dia and 38cm long with stay plate 300x300x6mm thick mild steel stay thimble and required length including binding to insulator stay bow and stay clamp galvanised iron stay strand wire 7/4mm dia, complete all as specified and shown in EP plate No 1 of SSR part-I, complete all as specified and directed. Note:-Excavation and concrete measured paid separately.
Supply and fix in replacement of Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade
Shackle Type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, 1100 volt grade 75 x90 mm dia of bolt 12mm and section of straps 31x3mm, complete all as specifed and directed.
S&F for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, 95 sqmm 3.5 core in replacement of the following sizes cross-sectionl area including taking down of old UNSV cable complete all as specifed and directed.
Supply and fix in replacement electronic driver (Printed circuit board) suitable for 120 watt LED street/flood light fitting input voltage 230 Volt 50 HZ AC supply complete all as directed. Note : The make of electronic driver should be match with the make of LED light fitting installed at site and the contractor sholud be visit the site before quoting the rates so as to avoid the ambiquity during execution stage.If driver will not work properly within 1 yr time frame.Contractor must change the same on his own cost.
Supply and fix in replacement LED panel suitable for 120 watt LED street/flood light fitting input voltage 230 Volt 50 HZ AC supply complete all as directed. Make : HPL/Havells/CG/Bajaj. Note : The make of LED Panel should be match with the make of LED light fitting installed at site and the contractor sholud be visit the site before quoting the rates so as to avoid the ambiquity during execution stage.If driver will not work properly within 1 yr time frame.Contractor must change the same on his own cost.
Supply and fixing in replacement LED Street light 120 Watt NEO N 5700K Endura Cityliner Neo/Neon new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED aslight source complete all as specified
Taking down carefully copper/aluminium point wiring (light/Fan socket or power) with complete fittings such as switch, sockets Ceiling rose pendent holders regulators etc. Removing old/UNSV material from site and making good the old disturbed surface.
M&L for replacement of Point wiring complete with 1.5 Sqmm single core multi stranded copper conductor cable PVC insulated unsheathed cable 1100 volt grade enclosed and including PVC casing and capping with fittings and accessories fixed to walls/ceiling by means of PVC rowl plugs fasteners with cadmium plated screws all as per IS including hard wood board and 3mm thick laminated sheet top covers including 1.5 Sqmm copper PVC insulated unsheathed continuous earth wire and connected to common earth dolly for the following:-
(a) One light/fan/5 Amp socket independent/bell controlled by one, one way switch.
(b) One three pin socket outlet 5 Amps independent board complete
(c) One 3 pin 5 Amp socket out let on the same board with other switches.
All as per item No 62 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm PVC insulated unsheathed continuous earth wire and connecting to common earth dolly.
Supply and Fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed
Supply and Fixing in rteplacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed
Supply and Fixing in replacement switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed
Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed
Supply and fixing in replacement ceiling rose 65X50 mm two to three terminals complete all as specified.
Supply and fixing in replacement lamp holder insulated body with back plate batten/angle type for batten fitting complete all as specified.
Supply and Fixing in replacement fan regulator, electronic step type heavy duty 230 volts, complete all as specified and as directed.
Supply & Fix Ultra modern recess mounting luminaire with high performonging LEDs suitable for mounting with armstrong/grid ceiling 34W size 2`x 2` and connecting up with three core copper conductor cable of suitable size including taking down old,complete all as specified and as directed.
Supply and fixing in replacement of Endura Linear NEO wall mounted LED Batten 20 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.
Supply and fixing in replacement LED Bulbs white /warm white (as per demand) in colour of 9/10 Watt,B-22 base Cap. complete all as specified and as directed.
Dimantling and taking out ceiling fan 230 volts 1200/1400mm sweep any make cutting the old burnt winding rewinding with new super enamelled copper wire as existing guage including insertion of insulating papers threading and insulating with insulating warnish, lathe work, replacement of 2.5/3.15 MFD capacitor, replacement of MS split clamp 02 nos with rubber reel complete all as specified and as directed.
Supply and fixing in replacement of ball bearing of size 6200 to 6204 suitable for ceiling fan 1200/1400mm sweep,complete all as specified and as directed.
Servicing of Desert cooler by repair and replacement of Fan motor,submersible pump,with grass wood wool cooling pads of suitable size to fit in desert cooler for all requisite sides complete all as specified and as directed.
Supply and fixing in replacement of sheet metal enclosure MCB DB 12 way double door Single pole and neutral, complete all as specified.
Supply and fixing in replacement of sheet metal enclosure MCB DB 8 way double door Single pole and neutral,complete all as specified.
Supply and fixing in replacement of sheet metal enclosure MCB DB 4 way double door Single pole and neutral complete all as specified and directed.
Supply and fixing in replacement of sheet metal enclosure MCB DB TPN 4 way double door vertical type,complete all as specified.
Supply and fixing in replacement of MCB SP 6 to 32 Amps C curve,complete all as specified.
Supply and fixing in replacement of MCB SPN 40 to 63 Amps C curve,complete all as specified.
Supply and fixing in replacement of MCB TPN 63 Amps C curve, complete all as specified.
Supply and fixing in replacement of Geyser heating element 1.5/2.0 KW, complete all as specified.
Supply and fixing in replacement of Geyser Thermostat for 25 Ltrs, complete all as specified.
Supply and fixing in replacement of Geyser Assembly 6/9 holes for 25 Ltrs,complete all as specified.
Supply and fixing in replacement of 15mm bore PVC connection Pipe Hot and Cold 600mm long for geyser, complete all as specified.
Supply and fixing in replacement of socket flush type 3 pin 15/16 Amps, complete all as specified.
Supply and fixing in replacement of switch socket combination 3 pin 5 Amps flush type,complete all as specified.
Supply and fixing in replacement of switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal, complete all as specified.
Supply & fix in replacement of capacitor of 2.5 mfd/3.15mfd 220 v, 50 Hz including PVC clamp, connector etc suitable for Existing Ceiling Fan, ISI marked.
Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300m,complete all as specified.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified.
S&F in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed with stranded conductor 6 Sqmm twin core cable flat or circular,complete all as specified.
S&F in repair 1.5 Sqmm single core multi stranded copper conductor (FRLSH) cable PVC insulated unsheathed cable 1100 volt grade conforming to IS-694,complete all as specified.
S&F in repair 2.5 Sqmm single core multi stranded copper conductor (FRLSH) cable PVC insulated unsheathed cable 1100 volt grade conforming to IS-694 ,complete all as specified.
S&F in repair 4.0 Sqmm single core multi stranded copper conductor (FRLSH) cable PVC insulated unsheathed cable 1100 volt grade conforming to IS-694,complete all as specified.
Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 23,953.50 during AOC Note:- Tenderers shall not quote for this Schedule
SUBASH CHANDER SHARMA AND SONS
M/S RAHUL GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .