Karnataka

Active

Works

Other Works

Construction of Dry Wall partitions and other works for various departments at Phase-1 buildings, New Campus of Rani Channamma University Hirebagewadi, Belagavi

Rani Chenamma University Belgavi

Rani Chenamma University (Belgavi) | Belagavi, Karnataka

Amount: Refer DocsCloses: 11 Jun 20265d left

Tender Value

Refer Docs

EMD Value

₹3 L

Closing Date

11 Jun 2026, 10:30 pm5d left

Tender Inviting Organisation

Name

Rani Chenamma University Belgavi

Work Description

Construction of Dry Wall partitions and other works for various departments at Phase-1 buildings, New Campus of Rani Channamma University Hirebagewadi, Belagavi

Tender Information

Tender ID

303705

Reference Number

RCUB/2026-27/OW/WORK_INDENT16

Tender Type

Open

Product Category

Other Works

Location

Rani Chenamma University (Belgavi)

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredCompany Registration Certificate

RequiredPWD Contractor license class 2 & above

RequiredAttach scan copy of similar work done certificate an extent of 50 Percentage of the cost of work signed from Executive Engineer

RequiredAssessed Tender Capacity shall be more than the Tendered Amount

RequiredAttach scan copy of GST registration certificate

RequiredAttach scan copy of PAN registration certificate

RequiredAttach scan copy of Aadhar card

RequiredAttach scan copy of address proof

RequiredBanker Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Corrigendums modifications correction if any will be published in the KPPP website only.

All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the original documents before approval

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP / e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

All the materials to be utilized for the work must be tested in authorised labs and quality control test reports must be enclosed to the bills. All types of materials & machineries with Accessories and other materials must be tested by third party agencys. Cost of all QU tests must born by contractor

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Tenderer must submit his present accurate postal address and phone / cell phone number

The tender may be cancelled at any stage without assigning any reason

The rates of items are inclusive of cost of materials, labour charges, HOM of machinery, all lead and lifts and all other charges to complete the work successfully as per specifications and as directed by engineer in charge of work

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form

Any objection regarding the tender must be submitted directly to Executive Engineer, not in inward.

Third party consults may be engaged for checking quality and quantity of work and to prevent any misuse. proper reporting methods trough these agencies and their comments to be reviewed addressed immediately at district level. quality of work is of most importance

As per Karnatka State Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter No.PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare Fund. & Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

The work should be carried out in accordance with the standardspecifications specified by the department.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately

Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

Liquid assets and/or availability of credit facilities of not less than Rs.60 Lakhs through submission of unconditional Credit line/letter of credit/ certificates from banks for meeting the fund requirement etc.

Achieved in at least two financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs.400 Lakhs usually not less than two times the estimated annual payments under this contract. The Consolidated Annual Financial turnover certificate for the relevant financial years certified by an ICAI registered Chartered Accountant along with UDIN number also the audited financial statements for each of the financial years to be submittedThe certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number and duly notarized by Notary Public

Satisfactorily completed as Prime Contractor at least one similar Nature of work Drinking Water Supply Work of value not less than Rs.100 Lakhs not less than 50% of estimated value of contract certified by an officer not below the rank of Executive Engineer

Tenderers must have valid PWD registration and must submit PWD registration copy Class II & above

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

List of Financial Resources with Certificates

Past Experience

Satisfactoriy completed (atleast 50%) as prime contractor at-least one such similar work of value not less than Rs.100 lakhs

Work Done Certificate

Executed in any one year the following minimum quantities of work 1.Gypsum partition - 3273.60sqm 2.6mm toughened glass-322.00sqm 3. Wiring-25000mtr 4.Wall painting-3273.00 sqm

Work Done Certificate

Financial Status

Minimum financial turnover (Rs.400 Lakhs)

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs. 60 Lakhs (estimated cash flow for 3 months of peak construction period)

Line of Credit

PWD License Class-2 and above

PWD Registration Certificate (Class I/II/III/IV)

Fee & Financial Details

Tender Fee Amount

₹4,170

EMD Fee Amount

₹3 L

Important Dates

Last Activity

3 Jun 2026

Published

3 Jun 2026

Bid Opening

12 Jun 2026

Download Ends

10 Jun 2026

Pre-Bid Meeting

10 Jun 2026

BOQ Preview

•

Construction of Dry Wall partitions and other works for various departments at Phase-1 buildings, New Campus of Rani Channamma University Hirebagewadi, Belagavi

•

Cavity wall insulation with Rock Wool Slab (50mm) - Providing and fixing rock wool slab 50mm thick resin bonded rock wool slab having density 36+/-5 kg/m3 for insulation of cavity wall with includ- i...

•

Providing and fixing 12 mm thick frameless toughened Glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic ...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...

•

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.

•

Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 300mm

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm

•

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, w...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...

•

Providing and laying gypsum panel partitions 100 mm thick with water proof gypsum panels of size 666x500x100 mm, made of calcite phosphor gypsum fixed with tongue and groove, jointed with bonding plas...

•

Providing & Fixing 6mm Clear Toughened Glass Partition.

•

Specifications : 6mm thick toughened / tempered clear glass conforming to IS 2553, heat

•

strengthened and certified. Fixed with approved aluminiu...

•

Providing and Fixing Frosted Film on glass surfaces.The film shall be 50 - 100 microns thick with a uniform frosted finish. The work shall include: surface Preparation: Cleaning the glass thoroughly t...

•

Hold fasts (basic rate item no.444)

•

Supplying and fixing of PVC casing and capping on the wall or ceiling

•

using necessary materials like bends, junction box, elbows, screws at an interval of 300mm as required. 50 mm (KPTCL SR 2026-27 Vo...

•

Supplying and fixing regular MCB distribution boards on wall/wood board/

•

flush mounting using required clamps,bolts,nuts etc.,with provision for fixing suitable typecapacityMCB's single phase/3 phase/...

•

Supplying and fixing regular MCB distribution boards on wall/wood board/

•

flush mounting using required clamps,bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3 phas...

•

eachSupplying and fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,

•

necessary phase separators, handle and wiring complete. Protection o...

•

SupplyingandfixingMouldedCaseCircuitBreaker(MCCB)overthe existing wood/panel

•

board using necessary screws, bolts, nuts,

•

necessaryphaseseparators,handleandwiringcomplete.Protectionof OverloadandShort

•

SupplyingandfixingMouldedCaseCircuitBreaker(MCCB)overthe existing wood/panel

•

board using necessary screws, bolts, nuts,

•

necessaryphaseseparators,handleandwiringcomplete.Protectionof OverloadandShort

•

Supplying PVC flexible conduit pipe .mmdiafixingonsurface

•

overinvertedtaperedwooden plugs orphill plugsorrawlplugsand

•

clampedusingheavygaugesaddlesatanintervalof300mmusingNF

•

screwsandoneitherendof the...

•

Supplying and wiring adopting loop system in existing PVC

•

Conduit /casingcapping using2x1.5Sqmm(Phase&Neutral) &

•

1x1.0 sqmm(Earthwire) FRLSmultistrand PVC insulated

•

copper wire (confirming toIS-694:an...

•

Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

694:2010 4 mm2 (KPTCL S...

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

694:2010 6 mm2 (KPTCL S...

•

Wiringfor lighting/powercircuitusingoneof FRLSPVCinsulated

•

1100Vgrade,multistrandcopperwirewithlowconductor resistance

•

singlecore inopenorconcealedsystemofwiringwithspecifiedIS

•

SupplyinganddrawingFlexibleMulticoreCablemanufactured with

•

electrolyticgradeflexiblecopperwithlowconductor confirmingto

•

IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for

•

working voltage u...

•

Supplying and fixing surface/flush mounting unbreakable PVC

•

modular box suitable formountingmodular switchplateswithdue

•

groove cutting inBrick/C.Cwall, including necessary rawl plugs,

•

Machine/NF screw...

•

Supplying and fixing surface/flush mounting unbreakable PVC

•

modular box suitable formountingmodular switchplateswithdue

•

groove cutting inBrick/C.Cwall, including necessary rawl plugs,

•

Machine/NF screw...

•

Supplying and fixing superior quality modular switch mounting

•

polycarbonateplatewithnecessarysupportingbackplatewithrequired

•

nos. ofmachine screws, bolts nuts etc., complete on the existing

•

Supplying and fixing superior quality modular switch mounting

•

polycarbonateplatewithnecessarysupportingbackplatewithrequired

•

nos. ofmachine screws, bolts nuts etc., complete on the existing

•

Supplyingandfixingofmodular switch&connectedaccessorieson

•

existing modular switch plate as per IS 3854 and IS 1293.6 A socket (KPTCL SR 2026-27

•

Vol VI Part -III ItNo 3.6.3)

•

Supplyingandfixingofmodular switch&connectedaccessorieson

•

existing modular switch plate as per IS 3854 and IS 1293.6 A switch (KPTCL SR 2026-27

•

Vol VI Part -III ItNo 3.6.1)

•

Supplyingandfixingofmodular switch&connectedaccessorieson

•

existing modular switch plate as per IS 3854 and IS 1293. 16 A switch (KPTCL SR 2026

•

27 Vol VI Part -III ItNo 3.6.7)

•

Supplying exhaust fan of 1440 RPMof 300mm(12") sizewith

•

bracket blades complete for light duty suitable tooperateon230V

•

50Hz, AC Supply. (KPTCL SR 2026-27 Vol VI Part -III ItNo 6.1)

•

Supplyingwallmounting fan suitable tooperate at single-phase

•

230v AC. supply. (KPTCL SR 2026-27 Vol VI Part -III ItNo 6.5.2)

•

Supplyingof . TRInvertor type splitAir conditioners suitable for

•

operation onA/Csupply singlephase50Hz230Vwithhermetically

•

sealedinvertercompressor withaircooledcondenser, latestR410A/

•

R-32refrigerant...

•

Supply and Installation of Copper Pipe with Cable and Drain Pipe for Air Conditioning systems.

•

Copper Pipe Specifications Material Soft annealed copper 99purity, bright finish, carbon free inside

•

Supply and Installation of AC Water Drain Pump (Ultra Quick Fit Mini Blanc) (If Required) for high wall indoor AC units.

•

Key Specifications

•

Design Compact pump, designed to fit beneath indoor units, a...

•

Providing and fixing wooden platform: made out of teak wood section 50x50mm of legs,

•

50x50mm for horizontal both at suitable intervals from the point of view of stability, the top

•

of the platform co...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-4 DRAFT Dry Wall.docx

Tender Document • 0.19 MB

LOC format.pdf

Sample Submission Guidelines • 1.75 MB

Ready to Participate?

Download all tender documents and submit your bid

Construction of Dry Wall partitions and other works for various departments at Phase-1 buildings, New Campus of Rani Channamma University Hirebagewadi, Belagavi

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?