Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹29.5 L+₹1.5 L (5.52%)Rejected-Finance 759 126A FLAT NO 08 SUNDERBAN APT NEAR DR KELKAR HOSPITAL PRABHAT ROAD PUNE 411004 INDEX NO C 402 HQ CEPZ PUNE | PUNE | MAHARASHTRA | 411004 | L2 | Rejected-Finance High Rate | |
| 3 | L3₹31.0 L+₹3.1 L (11.0%)Rejected-Finance C 1 502 MANDKE ADVANTAGE HOME SOCIETY LULLANAGAR PUNE 411 040 | PUNE | MAHARASHTRA | 411040 | L3 | Rejected-Finance High Rate |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
28 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8516 WELCOME MAINTENANCE, PERIODICAL SERVICES AND MISC B/R WORKS TO CERTAIN BLDGS IN MD ACCN OF OLD NDA COMPLEX AREA OF AGE B/R-II UNDER GE (CENTRAL) PUNE
2024_MES_669347_1
8516 WELCOME MAINTENANCE, PERIODICAL SERVICES AND MISC B/R WORKS TO CERTAIN BLDGS IN
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (Central) Pune
As per Tender NIT
9 documents required · 9 mandatory
₹500
Garrison Engineer (Central) Pune
₹70,000
Yes
11 Nov 2024
31 Aug 2024
30 Sept 2024
31 Aug 2024
28 Sept 2024
14 Sept 2024
Amount
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L rendering 10 mm thick in CM 1:6 on fair face of brick /concrete / stone surfaces of any description and finishing the surfaces even and smooth with a thin layer of sogal finish complete with complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:4 in on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete all as specified and directed.
M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement primer of same make complete all as specified and directed.
M&L for preparing new plastered surface of walls and applying two coats of cement based paint over a coat of cement primer of same make complete all as specified and directed.
M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over 1mm thick wall care putty including complete removal of existing treatment of any layer on wall complete all as specified and directed.
M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.
M&L for preparing old plastered or unplastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.
M&L for preparing old plastered or unplastered surface of walls and applying one coat of cement based paint complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of wall/ Ceiling by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincally and applying one coat of white wash complete all as directed and specified.
S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling all as specified in SSR Part-I complete all as specified and directed.
S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling all as specified in SSR Part-I complete all as specified and directed.
Supply and fixed in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gm complete all as directed.
Supply and fixed in repair 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete
S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement incl taking down complete all as specified and directed.
S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors incl taking down complete all as specified and directed.
Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.
S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed including taking out old one.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover, jet spray , connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and directed. MAKE:- CNS-WHT-851 or Techno commercial equivalent model in KOHLER and ROCA.
S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed.
S&F in repairs vitreous china wash hand basin, white, flat back of size 570mm x 470mm with & including a pair of pre-painted cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.Make Jaquar cat part no:URS-WHT-13253N or Techno commercial equivalent model in KOHLER and ROCA.
S&F in repair 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Jaguar cat part no-FLR-5047N or equivalent techno coomercial model in Koholer /Roca
S&F in repair 15 mm angle cock ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Jaguar cat part no-FLR-5053N or equivalent techno coomercial model in Koholer /Roca
S&F brass chromium plated shower roses of size 100mm with or without swivel joints, any size, including shower arm flange of CP fixing to steel pipe or union complete all as specified and directed. Make:- Jaguar cat part no-OHS-1989or equivalent techno coomercial model in Koholer /Roca
S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.
S&F in repair chromimum plated 15mm bore pillar taps with capstan head (but fancy type) screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nuts screwed for iron pipe and fixed all as specified. Make:- Jaguar cat part no-FLR-5015 or equivalent techno coomercial model in Koholer /Roca
S&F 140mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.
S&F in repairs harrison rails (Curtain rod/drapery rod), 20mm dia, stainless steel with and including fency type stainless bracket / wall to wall 02 Nos of each opening and stainless steel side stopper fency type of required shape and size 2 Nos of each opening complete all as specified and directed.
S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.Make:- Jaguar cat part no-FLR-5281N or equivalent techno coomercial model in Koholer /Roca
S & F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.
Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)
S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.
Dismantling of stone slabs and tiles of any description laid in CM in floors, approns etc complete all as specified.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete.
M&L for rubber moulded glossy chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigments in floors over and including 20mm thick screed bed in cement mortar 1:6 complete.
M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for 25mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete.
-Ditto- as item No 25 above but in skirting / vertical surfaces over and including 10mm thick baking coat of CM 1:3 complete all as specified.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20mm thick screed bed of CM 1:6 complete.
M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:3 complete all as specified.
M&L 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete and ensure best adhesion to surface complete
M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified
M/S NAVNEET S MORDE (BID ID -3103186)
PRANAV ENTERPRISES (BID ID -3104327)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .