Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 LAccepted-AOC WARD NO 02 NEAR CARMAL ACADEMY GANESH NAGAR ROAD TUKUM DISTRICT CHANDRAPUR MAHARASHTRA PIN 442401 | CHANDRAPUR | CHANDRAPUR | MAHARASHTRA | 442401 | L1 | Accepted-AOC Lowest bid | |
| 2 | L2₹9.3 L+₹1.8 L (23.6%)Rejected-Finance GROUND FLOOR C O RAMCHANDRA KRUSHNAJI HANWATE GHODPETH TAH BHADRAWATI DISTRICT CHANDRAPUR MAHARASHTRA PIN 442406 | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442406 | L2 | Rejected-Finance Higher than lowest bid | |
| 3 | L3₹10.0 L+₹2.4 L (32.5%)Rejected-Finance AT POST GHODPETH TAH BHADRAWATI DIST CHANDRAPUR CHANDRAPUR 442402 | BHADRAWATI | CHANDRAPUR | MAHARASHTRA | 442402 | L3 | Rejected-Finance Higher than lowest bid | |
| 4 | L4₹12.8 L+₹5.3 L (70.1%)Rejected-Finance NEAR PANKHA ASHOK YADAV HOUSE BMT CHOWK RAYATWARI COLLIERY CHANDRAPUR CHANDRAPUR 442402 | CHANDRAPUR | CHANDRAPUR | MAHARASHTRA | 442402 | L4 | Rejected-Finance Higher than lowest bid |
Tender Value
₹16.7 L
EMD Value
₹21,000
Closing Date
27 Sept 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (Civil), CWS Tadali, WCL
Staff Officer (Civil), G.M. Office, WCL CWS Tadali, Urjagram, District - Chandrapur, Maharashtra, PIN - 442406
Cleaning bushes/grass etc., improvement of shoulders of main road, improvement of approaches to some buildings, repairing drains, and other allied works at Central Store under CWS Tadali
2024_WCL_317216_5
CWTD-CIV-E-22-2024-25
Open Tender
Civil Works - Others
Item Rate
90 days
WCL CWS Tadali, Urjagram, District- Chandrapur
Please refer Tender documents.
3 documents required · 3 mandatory
₹21,000
19 Oct 2024
11 Sept 2024
28 Sept 2024
11 Sept 2024
27 Sept 2024
12 Sept 2024
11 Sept 2024 - 16 Sept 2024
Amount
Cutting/ uprooting & clearing rank vegetation, grass, bushes, shrubs, brush-wood, vines (on boundary walls, fences, etc.), trees and saplings of girth up to 30 cm (measured at a height of 1 mtr above ground level), removal of stumps of trees cut/ fell earlier, minor trimming/ pruning of branches of some trees, disposal of unserviceable materials with lead upto 5 km, and stacking of serviceable materials at designated places, as per instructions of the Engineer-in-charge or incharge of the premises or their representative(s). Wherever the work is not feasible through mechanical means, or working by mechanical means is likely to cause damages to nearby buildings, structures, boundary walls, fencings, etc., the work is to be done through manual means. The workers must be equipped with the required safety gear/ accessories. The cost is including all leads & lifts; cost of hydraulic excavator/ dozer, other equipment/ tools (grass cutter, gardening scissors, phawda, ghamela, etc.), operators & other workers, fuel, carriage/ transportation cost, & safety gear/ accessories for the workers, etc. all complete.
Item code 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.
Item code 15.2.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix).
Item code 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Item code 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
Item code 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources).
Item code 6.34.2 - (6.4.2 - 6.1.2) Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 Coarse sand).
Item code 11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.
Item code 13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand).
Item code 5.12 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Item code 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or More.
Item code 4.1(B)(i) of MPPWD SOR Granular Sub-base with Well Graded Material (CBR>30 or more) (Table:- 400-1 & Table 400-2): Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification. By Mix in Place Method: For Grading-I Material.
Item code 4.8(B)(i)(a) Water Bound Macadam: Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per clause 404 of specification. By Mechanical Means. Grading- I (63 to 45mm). Using Screening Type-A (13.2mm Agg.).
Item code 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil.
Item code 13.82.2 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats.
Item code 13.99.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.
Letter-writing alongwith painting of background (including borders) with synthetic enamel paint 2 or more coats, to give an even shade. Colours/ shades to be as directed by the department.
Providing and fixing 25 mm wide retro-reflective stickers/ tapes of approved colour on road-side trees, culvert parapet walls, etc. using nails, in sizes of approx. 4 inches each, as per instructions of the Engineer-in-charge or representative.
Cleaning of open drains of inner width upto 1 mtr by removing sludge, rubbish, etc. such that the bed of the drain is clearly visible. The sludge, rubbish, etc. to be disposed with lead upto 5 km, as per instructions of the Engineer-in-charge or incharge of the premises or their representative(s). The workers must be equipped with the required safety gear/ accessories. The cost is including all leads & lifts; equipment/ tools, carriage/ transportation cost, & safety gear/ accessories for the workers, etc. all complete.
Total impact of GST for the purpose of CTC
ASHUTOSH B.PARIDA
R C SHASANKAR
PRAKASH A. YADAV
techsummary_328763.pdf
PDF • 3.38 MB
finsummary_328763.pdf
PDF • 3.38 MB
LOA-E-22-2024-25_5.pdf
PDF • 1.46 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .