PROVN OF HARDSTANDING WITH INTERLOCKING TILES IN FRONT OF SURYA COMPLEX NEAR USMAN ROAD UNDER GE (WEST) LUCKNOW

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation and getting out in soft/loose soil etc. (including cutting of roads) or for shafts, wells, cesspits, manholes and sewage lines, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 m in depth complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Returning filling in of excavated soft/loose soil including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

M&L for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc. finished even and fair for receiving floor finish complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass filling concrete etc including necessary formwork complete all as specified and directed

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:4 complete all as specified and directed.

M & L 15 mm thick rendering in CM (1:4 ) on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all speciified and directed

S & F in repair, galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire complete all speciified and directed

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint with roller over a coat of primer complete all as specified.

M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified.and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, benching, copings, padding, kneelers, bed blocks, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

S & F Precast PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in cover slab set in CM 1:4 including necessary form work and finishing the surface even and fair complete all speciified and directed

M&L Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade confirming to IS-15658 (2006) with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specifed and directed. Make :-Mehtab Tiles /Tulip Infrastructure Saharanpur/ Any other equivalent ISI marked make as approved by GE

S & F Providing and laying at or near ground level kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and applying two coats of exterior emulsion paint over a coat of primer on all exposed surface of Kerb stone complete all as specified and directed.

Ajanta Associates

M/S PRATAP BUILDERS

M/s Sultan Khan

NAVSURAJ CONSTRUCTION AND INFRADEVELOPERS

M/S SWATI CONSTRUCTION

EVEREST CONSTRUCTION

M/S S S A ASSOCIATES

QUALITY CONSTRUCTIONS CO

sidhi vinayak construction

M K Engineers and Contractors