ADDN ALTN TO STEEL GATES AND FLAG MAST AT ICGS KAVARATTI UNDER GE NAVY LAKSHADWEEP

Amount

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description by cutting rivets not otherwise provided for complete all as specified and as directed

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc including removal of debris out side MD land complete all as specified and as directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 for depth exceeding half brick but not exceeding one brick complete all as specified and as directed.

S&F framed work as in doors or gates of stainless steel grade 316L (16702), ASTM (86221) standard, welded types(12413), ISO(20239) certified using complete ERW or induction butt welded stanless steel sheeting or other covering. etc as required including either hooks and hinges or stainless steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging , guide channels fixing floors also stainless steel fastening and fixing complete all as specified and as directed.

S &F 2.0 mm thick plain, stainless steel sheeting grade 316L, mirror polished 240 girt fixed with welding complete all as specified and as directed.

S &F stainless steel roller grade 316L, ASTM standard, welded types(12413) for heavy duty type using ERW or induction butt welded stanless steel guide channels as required either hooks and hinges or stanless steel hanging door fittings complete all as specified and as directed.

S&Fstainless steel grade 316L as in running rails and guides also fastening of angle or other section with gusset plates ,rails, braces, pintel, pivots for gate etc., including drilling / fixing of guide rails/ channels in PCC 1:2:4 type BO using 12.5mm graded aggregate complete all as specified and as directed.

S&F stainless steel "COAST GUARD" emblem in English letters n exc. 10 cm high on 2.0 mm thick plain, stainless steel sheeting grade 316L, mirror polished 240 girt, size of the emblem sheet shall not be less than area of 400mm X 400mm complete all as specified and directed. Note : - 01 No."COAST GUARD"emblem shall be considered as one job for the purpose of payment.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed

M &L for preparation of new steel surfaces of any description, exceeding 10 cm in width or girth and applying two coats of epoxy spray paint of any colour over a coat of epoxy primer complete all as specified and as directed.

M &L for preparation of new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic weather proof emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

Erection fixing only gates of angle or other section with gusset plates, rails, braces, etc complete after repairs / replacement of hinges etc., complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of brickwork, stone / boulder or PCC Block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed .

Removing building materials etc. (other than spoil ) to a distance of 100m or under including loading, unloading and stacking at the destination complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 depth and getting out in soft / loose soil complete all as specified and as directed .

M&L PCC 1:4:8 type D2 by by using 40mm graded crushed stone aggregate as in foundations, filling and mass concreting complete all as specified and as directed.

M&L RCC 1:1.5:3 Type A1 nominal mix using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams,plinth beams, bases for columns, etc. complete all as specified and as directed.

M&L RCC 1:1.5:3 Type A1 nominal mix using 20 mm graded stone aggregate as in columns complete all as specified and as directed.

Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

Mild steel CRS TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work complete all as specified and as directed .

Formwork to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and as directed .

M&L pre-cast cement concrete block masonry 1:3:6 type C1 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L hardcore with broken stone aggregate of gauge n.exc 63mm deposited spread and levelled in layer not exc 15cm thick, watered and rammed to true surface complete all as specified and as directed .

M&L for 100 mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including use and waste of form work complete all as specified and as directed .

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate asin floor including use and waste of form work complete all as specified and as directed .

M&L SS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed .

S&F SS bolts, purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut. 25mm dia of neck and length of bolt exc 15cm but not exc 60cm complete all as specified and as directed .

M&L Flag post pipe of heavy weight of galvanised pipe comprising of different dia of sizes of pipes including necessary welding, hooks, D- shackle system for rope fixing base plate and further smooth movement of halyards complete all as specified and as directed.

M&L railing of SS 316L marine grade comprising of different dia of SS Pipes including necessary welding, hooks for chain fixing complete all as specified and as directed. Note: - (i) Thickness of SS Pipe shall not be less than 14 guage for dia morethan 50mm and 16 guage for less than 50mm dia of pipe.. (ii) The SS Grade shall be 316L and Marine grade (iii). The Pipe top shall be closed with SS cap.

M&L chain of SS 316L Marine Grade comprising of not less than 5mm dia, 40mm pitch including necessary welding complete all as specified and as directed.

M&L SS 316L Marine Grade rope of 10mm dia with fixing arrangement complete all as specified and directed.

M&L 20 mm thick machine cut granite tiles (of any type) as in flooring laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L 20 mm thick machine cut granite tiles (of any type) as in vertical surfaces lfixing with adhesive as per manufacturer instructions including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Returning filling in, with excavated soils including spreading, levelling, watering and well ramming in layers n.exc. 25 cm thick complete all as specified and as directed .

Removing excavated material to a distance exc 1.5Km and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed .

Abhiraj Enterprises (BID ID -3506994)

M/S JIWA SINGH S GILL (BID ID -3504863)