CWE/FZR- /2021-22 Provn of Addn/Altn to existing manholes and sewage system at GH under GE (West) Ferozepur Cantt

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre depth and not exc 10 Sqm on plan, for laying of cable and getting out,compete all as specified.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and exc 1.5 metre but not exceeding 3 metre depth and not exc 10 Sqm on plan, for laying of cable and getting out,compete all as specified.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and exc 3 metre but not exceeding 4.5 metre depth and not exc 10 Sqm on plan, for laying of cable and getting out,compete all as specified.

Excavation over areas in soft/loose soil not exceeding 1.5 metre and getting out complete all as specified.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC or Reinforced concrete) Internal dia of pipe 200mm, set in cement mortar, complete all as specified.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC or Reinforced concrete) Internal dia of pipe 150mm set in cement mortar, complete all as specified.

M&L Cement concrete 1:3:6 type C-2 as in bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for pipe of 250mm bore, complete all as specified.

M&L Cement concrete 1:3:6 type C-2 as in bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for pipe of 150mm bore, complete all as specified.

M&L Cement concrete 1:3:6 type C-2 as in bed to drain pipes including packing under, and haunching completely surroundings of pipes after they are laid and tested for pipe of 250mm bore, complete all as specified.

M&L for Reinforced concrete pipes, 250mm bore, class NP2, laid and jointed complete with collars in trenches, complete all as specified.

M&L for Reinforced concrete pipes, 150mm bore, class NP2, laid and jointed complete with collars in trenches, complete all as specified.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for Internal dia of pipe 150mm, complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for Internal dia of pipe 250mm, complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Demolition of Cement concrete of any description and in any position not otherwise, complete all as specified and directed

M&L Cement concrete (1:4:8) type D-2 (40 mm graded stone aggregate) as in foundation filling as mass concrete, complete all as specified.

M&L Cement concrete (1:2:4) type B-2 (40 mm graded stone aggregate) as in surface channels and drains, complete all as specified.

M&L cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar (1:4) complete with joints to match, complete all as specified.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified.

S&F Cast iron soil, waste and vent pipes, 100mm bore in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified.

Fixing only Cast iron soil, waste and vent pipes, 100mm bore retrieved from dismantling (Item No 19 hereinbefore) in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified.

S&F 100 mm bore, cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with cement joints complete all as specified.

S&F 100 mm CI sand cast branch pieces single (equal or unequal), ordinary or inverted(spigot or socket type) or with parallel branches, complete all as specified.

S&F Cast iron soil, waste and vent pipes, 75mm bore in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified.

Fixing only Cast iron soil, waste and vent pipes, 75mm bore retrieved from dismantling (Item No 19 hereinbefore) in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified.

S&F 75 mm bore, cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with cement joints complete all as specified.

S&F 75 mm CI sand cast branch pieces single (equal or unequal),ordinary or inverted(spigot or socket type) or with parallel branches, complete all as specified.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius, complete all as specified.

All as per item 31 hereinbefore but using old bricks retrieved from demolition under item 30 hereinbefore including cleaning and removal of mortar from old bricks complete all as specified.

M&L for mild steel work as in steps, rungs, band, handles and all other similar works fixed independent made to shape and duly tarred and sanded, complete all as specified.

M&L Reinforced cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in precast cover slab, shelves, and similar articles and setting in cement mortar (1:4), complete all as specified.

S&F Mild steel TMT bars 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia FE-500/550 confirming to IS-1786-1985 all as specified.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level), complete all as specified.

M&L for 75mm thick Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of floor topping, complete all as specified.

M&L for 100mm thick Cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in sub base of floor topping, surfaces finished even and fair without using extra cement, complete all as specified.

AKASH ELECTRICALS

HAPPY ELECTRICALS

KAILASH CONSTRUCTION COMPANY

CHETAK CONSTRUCTION COMPANY

M/s Manoj Construction Co.

M/s Surjit Singh and bros