8280/E8

Amount

Dismantling asbestos cement ( corrugated ,semi corrugated sheets etc) sheets in roof coverings complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges and keeping serviceable sheets in safe custody for reuse in the work complete as directed.

Dismantling of timber fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section complete all as specified and directed.

Dismantling of timber scantling Over 40 Sqcm in section complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 Cm thickness. (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exe 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Material and Labour for plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directeded.

Material and Labour Brick work for half brick thick wallsvwith fly ash bricks of designation 7.5, straight or curved on plan of any radius, built in cement mortar 1:4 complete all as specified and directeded.

Materials and labour 2nd class hardwood Plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and fix 30 mm thick, Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Materials and labour 2nd class hardwood timber scantling, clean sawn complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood glazed & skeleton door shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24(a) complete all as specified and directed by Engr-in-Charge.

Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed by the Engr-in-Charge.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

Supply and fix aluminium anodised three track sliding window frame with shutters ( two panels of glazed shutter and one panel of wire mesh shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements etc. complete and glazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket and stainless steel wi\re cloth of 0.36mm nominal dia of wire. The section of frame and shutter is as under complete all as specified and as directed:- (A) Sections for frame (i) Top and verticals 92x 29.50 x 1.30 mm thick (ii) Bottom 92 x 29.50 x 1.20 mm thick. (B) Sections for shutter (i) 'A' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'H' section 41 x 20 x 1.10 mm thick .

Supply and fix Anodised aluminium anodised window and ventilator shutters, sliding / side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) including 4.8mm thick tinted glass, ordinary quality and glazing with aluminium / wooden beading in Square exc 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fix Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws including 4.8mm thick tinted glass, ordinary quality and glazing with aluminium / wooden beading in Square exc 0.50 Sqm in each pane etc.complete all as specified and directed.

Supply and fix Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat confirming to IS 1868-1996 for fixing etc. complete all as specified and directed. Note : (i) Thickness of aluminium section shall not be less than 1.5 mm.

Supply and fix 100mm butt hinges mild steel, medium weight, cold rolled complete all as specified and as directed.

Supply and fix 100mm butt hinges stainless steel complete all as specified and as directed.

Supply and fix 150mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 200mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and Fix 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Material and Labour for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Supply and fix Mild steel wind tie for roof including securing bolts, necessary drilling, bolting etc as required and simillar work, conforming to Fe 290 Gde E-165 complete all as specified and directed.

Material and Labour Mild steel fo grade Fe 410-W (Gde-E- 250) quality-A as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pices, cleat etc complete all as specified and directed.

Supply and fix 4mm thick E-board classic any design plain of size 595 x 595 mm fixed as in ceiling over aluminium grid suspended with GI hooks 6mm dia and clamp to hold GI pipe of the following section including taking down old unserviceable one:- a) 25 x 25 x 1.5mm(Minimum thick) aluminium angle b) 25 x 25 x 1.5mm (Minimum thick) aluminium cross Tee. c) 25 x 35 x 1.5mm (Minimum thick) aluminium main Tee , including applying two coats of acrylic emulsion distemper after preparation of surface complete all as specified and directed by Engr-in-Charge.

Supply and fix 6mm thick asbestos cement corrugated or semi corrugated sheets as in roofs, walls etc fixed with 'L' type or 'J' type hooks or crank hook bolts complete all as specified and as directed.

Refixing only 6mm thick asbestos cement corrugated or semi corrugated sheets as in roofs, walls etc fixed with 'L' type or 'J' type hooks or crank hook bolts complete all as specified and as directed. Note:- Old serviceable AC sheets obtained from dismantling shall be reused.

Supply and fix 6mm thick, asbestos cement two piece adjustable plain wing ridge fixed with l-type or J-type hook or cranked bolt complete all as specified and as directed.

Supply and fix Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/vally gutter, fixed with self tapping screws complete all as specified and directed.

Material and Labour for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth proction or pavings etc finishing cement concrete surface even and fiar without using extra cement complete all as specified and directed.

Material and labour Vitrified ceramic tiles 10mm thick (square/rectangular) light shade, polished area of each tiles exc 0.18 Sqm but n.exc 0.38 Sqm (600X 600X10mm), in floors etc, set and jointed in neat cement slurry and jointed in white or coloured cement to match with the existing etc over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Material and labour Vitrified ceramic tiles 10mm thick (square/rectangular), light shade, polished area of each tiles exc 0.18 Sqm but n.exc 0.38 Sqm (600X 600X10mm), set and jointed in neat cement slurry and jointed in white or coloured cement to matcht as on vertical surfaces such as skirtings, dados, risers etc over 10mm thick backing course in CM 1:4 complete all as specified and directed.

Materials and labour for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed by Engineer-in-Charge.

All as per item No.45.00 here-in-before but on vertical surfaces such as skirtings, dados, risers etc over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Materials and labour Glazed ceramic colour tiles in vertical surfaces such as skirtings, dados, risers etc of size 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match the tiles over and including 10mm thick backing course in CM 1:4 for receiving tiles.

Material and Labour 16-18mm thick granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in CM(1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 including necessary edge moulding/chamfering (full or half moulding) including dismanteling of old unserviceable stone slab complete all as specified and directed.

Material and Labour 25mm thick Pre polished coloured cement concrete chequerred tiles of size 300X300 mm jointed and pointed in neat cement slurry with white or coloured to match including over 20 mm thick screed bed CM 1:4 including dismentling old unserviceable chequerred tiles complete all as specified and directed.

Material and Labour Rendering 15mm (10 + 5 mm) thick in cement mortar 1:4 on fair faces of brick work or concrete surface in two layers each mixed with integral water proofing compound @ 2% by weight of cement (WPC shall be mixed with top layer only i.e 5mm thick) finished the surfaces even and smooth without using extra cement complete all specified and as directed. Note : - Water proofing compound shall be measured and paid separately as "Supply only" item under relevant item of these schedule.

Material and Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

"Supply only" liquid water proofing compound (ISI marked) complete all as specified and directed. Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ CICO/ SIKA

Materials and labour Preparation of newly plastered wall surfaces of any description and applying two coats of Acrylic distemper of any colour / tint over a coat of primer complete all as specified and directed.

Materials and labour Preparation of newly plastered wall surfaces of any description and applying two coats of Exterior emulsion paint ( Weather Coat) of any colour / tint, over a coat of primer upto any height of building including scaffolding and safety measure complete all as specified and directed.

Material and Labour Preparation of new steel surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint of any colour / tint over a coat of red oxide primer complete all as specified and directed.

Material and Labour Synthetic enamel paint of any colour / tint , two coats over a coat of pink primer over girth exc 10 Cm on wood or wood based surfaces after necessary preparation of surfaces complete all as specified and directed.

Supply and fix 15 mm bore, steel tubes, galvanised, medium grade with all fittingSupply and fixixed complete to wall and ceiling or laid in floors etc complete all as specified and directed including taking down old unserviceable GI tubing with fiitings.

Supply and fix 20 mm bore, steel tubes, galvanised, medium grade with all fittingSupply and fixixed complete to wall and ceiling or laid in floors etc complete all as specified and directed including taking down old unserviceable GI tubings with fittings.

Supply and fixing in repair bib cock 15 mm bore cast copper alloy chromium plated with crutch or butterfly handle screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

Supply & fix in repair 15mm Pillar Taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipecomplete all as specified and directed.

Supply & fix in repair 15mm bore stop cock, cast copper alloy, chromium plated , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed.

Supply and fix 550x400 size vitreous china wash basin white including 32 mm waste coupling of PTMT (half or full threaded, minimum weight 45 gms), waste pipe low density polyethylene pipe 32mm bore and brackets including taking down old wash hand basin alongwith fittings all as specified and as directed. Make:- Hindware Cat No. 10010 or equivalent of approved as specified in List of Makes in particular Specification.

Supply and fix in replacement Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed by the Engr-in-Charge. Make : Hindware Cat No 20042 equivalent of approved as specified in List of Makes in particular Specification.

Supply and fix in replacement vitreous China wash down water closet pan (pedestal pattern), white, with ‘P’ or ‘S’ trap, front or back inlet, including fixing bolts, PVC seat cover and mild steel chromium plated hinging device and all necessary connections. Make : Parryware Cat No. C0287 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

Supply and fix sheet Glass Shelf 300mm Long fixed to plugs with chromium plated brass screws including taking down old unserviceable one completed all as directed by the Engr-in-Charge. Make:-Prayag Cat No BEA-43 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

Supply and fix as in repair CP 4" Overhead Shower Rose with or without swivel joints including fixing to steel pipe complete all as directed by Engineer - in - Charge. Make- Essco Cat Part No.EOS 542N or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

Supply & fix PVC bathroom cabinet (white) of size 420 x 300 x 100 mm (approx) with one single shutter and built in mirror in front of shutter complete all as directed by Engr- in- Charge including taking down old unserviceable one. Make : Paryag CAT No 554 or equivalent model from make:- Polytuf.

Supply and fix in repair stainless steel (conforming to AISI-304 grade) kitchen sink with drainage board of overall size 915mm x 460mm and bowl size 410mm x 355mmx 165mm depth, made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 Cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete as directed.

Supply and fix in repair PVC connection 600 mm long fixed to 15mm GI pipe complete all as specified and directed. Make- Prayag/ Polytuf.

Supply and fix in repair CP Towel Rail 600mm Long fixed with and including CP brass screws and wooden / plastic cleats complete all as specified and as directed. Make : Essco cat Part No.AEC-1111 or equivalent model as specified in list of approved makes given here in after in Particuler Specification.

Supply and fix in repairs, Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed

S&F Rotational moulded HDPE water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position,tripple layered ISI marked including 20mm bore ball valve PTMT high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed including taking down old unserviceable tank with ball cock . Make:- Sintex (ISI Marked)/ Polycon (ISI Marked)/ Patton(ISI Marked).

Supply and fix in repair 20mm bore ball valve PTMT high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. Make- Prayag/ Polytuf.

Supply and fix 110 mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints fixed to wall etc complete all as specified and directed including taking down old unserviceable PVC(SWR) pipe with unserviceable fittings.

Supply and fix in repair 110 mm bore, PVC (SWR) pipe, double socketed, in any length with rubber ring joints fixed to wall etc complete all as specified and directed.

Supply and fix 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

Supply and fix 110 mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fix as in repair 20mm dia CP Curtain Rod haevy duty complete all as directed by Engineer-in-Charge.

Supply and fix as in repair brass CP brackets for curtain rods heavy duty complete all as specified and directed.

SATYAM CONSTRUCTION

JOY RAM ENTERPRISE

NUPUR CONSTRUCTION