PART-A) shifting of two number pumps of 1000 GPM, Make - kirloskar oil engines Itd. from one place to other place with in 50 metre radius, due to decreased water level in sump also dismantling of unused 100 metre pipe line from 28 number coal stock s

Amount

PART - A ( PUMP SHIFTING WORK) Making of Suction as per requirement Making suction bend of 6mtr. pipe 6" dia pipe line cutting of pipe 1 X51.75 = 51.75 Cm. Jointing by welding and bending pipe 2X51.75 = 103.5 Cm. Total 155.25. Cm.

Making of Discharge pipe as per Requirement Welding of 6" dia pipe to pipe for jointing by gas/electric welding M/C, 230 Mtr (38X51.75 = 1966.5 Cm) for jointing of pipe.

Making bend delivery side 6" dia pipe line cutting of pipe 4 X51.75 = 207 Cm. Jointing by welding and bending pipe 4X2X51.75 = 414 Cm. Total

Cleaning of sump Cleaning of sump to make it suitable for suction of mud free waterExcavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. All kinds of soil. (4m X 3m X 3m)= 36 cum x2=72 cum

Dismantling and Fixing of pump water engine Loading unloading, dismantalling and fixing of 1000 Gpm pump from one place to another with in range of 5 km

(Dismantling of unused 6" dia pipe from 28 number coal stock sump) by gas/electric welding M/C, 100 mtrs. (17X51.75 = 879.75 Cm) for cutting of pipe.

Making Base for pump By Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Hard rock.(3m X 3m X 2m)= 18 cum x 2=36 cum

Laying of pipe above ground 6" dia 230 mtrs Gl Pipe (21.2kg/m X 230 mtrs.)

Fixing 6" Carbon steel forged blind flange

Fixing 6" DIA Flange (12X2X51.75 = 1242 Cm.) welding

Providing and fixing bolts including nuts and washers complete.

1" inch cast iron screwed end ball valve

1/2" inch carbon steel screwed end ball valve

Fixing charge of item no.11,12 and 13 @15% of item rate.

PART - B (EXTENSION OF DELIVERY SIDE) Welding of 8" dia pipe to pipe for jointing by gas/electric welding M/C, 200 Mtr (200X63.84 = 12768 Cm) for jointing of pipe.

Making bend 8" dia pipe line cutting of pipe 4X63.84 = 255.36 Cm. Jointing by welding and bending pipe 4X2X63.84 = 510.72 Cm. Total = 766.08 Cm.

Providing 8" Carbon Steel Forged Blind flange

Fixing 8" DIA Flange. (4X2X63.84 = 510.84 Cm.) welding.

Providing and fixing bolts including nuts and washers complete.

2" inch cast iron screwed end ball valve

G.I. Internal Thread Rigid Gl pipe - Size 50 mm NB

Laying of pipe above ground 8" dia. 200 mtrs. GI Pipe (42.56kg/m X 200 mtrs.)

Fixing charge of item no.19 and 20 @15% of item rate.

Labour charge(4daysX6)=24

Welder

Supervisor

Total impact of GST for the purpose of CTC

M/S MAA CONSTRUCTION (BID ID -1109836)