Creation of 63kVA Transformer along with LT/HT at Nagmulla Yali Bankoot under KLC funds for village Banakoot Bandipora

Amount

Supply,Installation.Testing and Commissioning of below mentioned items

11/0.433kV, 63kVA 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, Aluminium wound, and with LV Cable Box having detachable Aluminium Gland plate with LV Bimetallic terminal connection suitable for vertical take off of cable.

11 kV Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

120mm² single core Cable,1.1kV Grade, XLPE Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole,(ST-410 SP33)

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Post Insulator Mounted LT Fuse Set mounted on 6 No 11kV Polymer post insulators with 75X10mm L-Shaped Al strip on each insulator for connections and 30x10mm AL Strip for Direct Neutral Link complete with base cannels, clamps nuts and bolts and fuse wires etc

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 )mm, nut-bolts, 2 Nos turn- buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Anti-Climbing Device with Clamps

Cement bottoming 1:2:4 mix as per Standards 0.5cum /pole

Painting of Poles with Red Oxide and Aluminium Paint

Sundry items like Aluminium lugs, Jumpers, Binding Tape etc

GI V cross-arm / side cross arm with top Bracket including clamp including back clamps

50 mm² ACSR Conductor

PG Clamps for 50 mm² ACSR Conductor

Galvanized Nuts and Bolts

Danger Plates with Clamps

Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3 mm

11 kV Isolator, Double Break,3-pole, 630Amp, horizontal mounting Type, with Earth Switch.

8 Mtr. Long Pole ST-410 SP15

GI Mukhi Clamps for Shackle Insulators (50x6mm)with nuts and bolt

16 kN Polymer Shackle Insulators

Cement bottoming 1:2:4 mix as per Standards 0.45cum/pole

M/s Dar Power (BID ID -2297798)