PROVN OF TOILET FACILITY WITH 20 TOILETS AND 20 WC AT SURADEVI TRG CAMP, GRC KAMPTEE

Amount

(A) BUILDING

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out and getting out in hard/dense soil, complete all as specified and directed.

Excavation in trenches n exc 1.50 mtr wide and n exc 1.50 mtr depth for foundation etc and getting out in hard/dense soil, complete all as specified and directed.

Material and labour for PCC (1:4:8) type-D2, (using 40 mm graded stone aggregate) as in filling and mass-concrete, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, plinth beams, fair finished surface , complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. fair finished surface , complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for a rough finished surfaces, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for a rough finished surfaces, complete all as specified and directed.

Material and labour for M-25 (using 20mm graded stone aggregate) Reinforced cement concrete (design mix) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., complete all as specified and directed.

Material and labour for M-25 (using 20mm graded stone aggregate) Reinforced cement concrete (design mix) for Column, pillars, piers, posts and struts for supporting of beam etc, complete all as specified & directed.

Material and labour for M-25 (using 20mm graded stone aggregate) Reinforced cement concrete (design mix) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajja and in shelves and the like etc, complete all as specified and directed.

Material and labour for M-25 (using 20mm graded stone aggregate) Reinforced cement concrete (design mix) for beams, cantilevers, bressummers, lintels over 1.5m span etc, complete all as specified and directed.

Supply and Fix for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips as in reinforcement, complete all as specified and directed.

Supply and Fix for TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips as in reinforcement, complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (Using old size brick) , complete all as specified and directed.

Material and labour for brick work with fly ash brick, straight or curved on plan to any radius built in half brick thick wall built in cm 1:4 (Using old size brick) , complete all as specified and directed.

Material and labour for rendering 5mm thick CM 1:3 on brick or concrete surfaces of ceiling /chajja's finished even and smooth without using extra cement , complete all as specified and directed.

Material and labour for rendering 10 mm thick CM 1:6 on fair faces of brick or concrete surfaces finished fair and even, complete all as specified and directed.

Material and labour for 15mm thick (in two layers of 10mm and 5mm thick) rendering CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacture instruction, complete all as specified and directed. Note: WPC shall be measured separately as supply only.

Supply only Liquid water proofing compound, complete all as specified and directed.

Supply and Fix solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet, complete all as specified and directed.

Supply and Fix factory made solid panel PVC Moulded Door Shutter, (with wood free EPS) 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing in SSR Part-I, complete all as specified and directed.

Supply and Fix aluminium alloy, anodized butt hinges with GI mild steel hinge pins of size 100mm , complete all as specified and directed.

Supply and Fix 150 mm long aluminium, anodized, barrel tower bolts of extruded section, complete all as specified and directed.

Supply and Fix 125 mm long aluminium handle cast type anodized, complete all as specified and directed.

Preparation to new steel surfaces of any description over 10 cm in width or girth not other wise described and applying two coat of synthetic enamel paint over a red oxide zinc chrome etc., complete all as specified and directed.

Material and Labour for hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surfaces of broken stone or boulder, complete all as specified and directed.

Material and Labour for crushed stone dust filling under floor or in foundation under floors including watering and consolidation etc, complete all as specified and directed.

Material and Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor, complete all as specified & directed.

Material & labour PCC (1:3:6) Type C1 (using 20 mm graded stone aggregate), 75 mm thick as in plinth protection and finishing surfaces even & smooth without using extra cement, complete all as specified & directed.

Supply and Fix for forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' , complete all as specified and directed.

Material & labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc, complete all as specified and directed.

Material & labour coloured/printed glazed ceramic tiles 300x450x6 to 7mm thick, in floors/walls skirting/dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4, complete all as specified & directed.

Supply and Fix Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed.

Material & labour for cement concrete 1:2:4 type B1,(using 20mm graded stone aggregate) as in bed block of holdfast and PCC coping, complete all as specified and directed.

Supply and Fix precast cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) louvers and jallies 35 mm thick (measured solid) including all mouldings but excluding frame and fixed, set in CM 1:4 , complete all as specified and directed.

Supply and Fix PVC valveless, symphonic action type flushing cistern low level 10 litres capacity, white, with inlet, ball valve, float and handle including brackets , complete all as specified and directed.

Supply and Fix vitreous China squatting pan 'Orissa' pattern, size 580x440mm white, with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) including provision of lime concrete bedding , complete all as specified and directed.

Supply and Fix Vitreous china wash down water closet (pedestal pattern) white with sheet cover including fixing bolts and jet system excluding flushing cistern but including with flush pipe with S or P trap, complete all as specified & directed.

Supply and Fix Plastic water closet seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, complete all as specified and directed.

Supply and Fix Health faucet CP with flexible tube and wall hook , complete all as specified & directed.

Supply and Fix for Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) , complete all as specified and directed.

Supply and Fix vitreous China W.H.B. white flat back of size 550 x 400 mm, including PVC waste pipe, and brackets or wall hung fixed with bolts etc, complete all as specified and directed.

Supply and Fix waste coupling chromium plated size 32 mm with long thread, complete all as specified and directed.

Supply and Fix Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws , complete all as specified and directed.

Supply and Fix in chromium plated shower rose of size 125mm, fancy type fixed to 15mm bore pipe , complete all as specified and directed. .

Supply and Fix tubular towel rail, 20mm dia, D type, 60cm long between flanges chromium plated, complete all as specified and directed.

Supply and Fix PVC connection 15 mm dia, 450 mm long including brass ferrules on both ends, complete all as specified and directed.

Supply and Fix low density PVC pipe 32/40 mm dia as in waste pipe to sink/WHB, complete all as specified and directed.

Supply and Fix 15 mm bore galvanized steel tubes concealed, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors, Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing or concealed etc., complete all as specified and directed.

All as per item Sr No 1.49 herein-before but 20mm bore, complete all as specified & directed.

Supply and fixing 15 mm bore Pillar taps fancy type chromium plated with capstan heads screwed down high pressure with/without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe fixed , complete all as specified & directed.

Supply and fixing 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule , complete all as specified & directed.

Supply and fixing 15mm bore angle stop valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union, complete all as specified & directed.

Supply and fixing cast iron floor trap with grating 100 mm dia including jointing to waste pipe fixed in PCC type B-I ,1:2:4 etc., complete all as specified & directed.

Supply and fixing Rotational moulded polyethylene water storage tanks (minimum four layer cylindrical vertical with closed top) 1000 Litres hoisted and fixed in position, complete all as specified & directed.

Supply and fixing 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum wt 210 Gram), complete all as specified & directed.

Supply and fixing 20mm bore gate valve with iron wheel head screwed both ends for iron pipe , complete all as specified & directed.

Supply and fixing 15mm bore gate valve with iron wheel head screwed both ends for iron pipe , complete all as specified & directed.

Supply and fixing cast iron soil, waste and vent pipes 75mm dia in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls, complete all as specified & directed.

Supply and fixing 75mm dia bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified & directed.

Supply and fixing 75mm dia branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified & directed.

Supply and fixing cast iron cowls 75 mm dia, complete all as specified & directed.

Supply and fixing stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified & directed.

Supply and fixing PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls or laid in trenches, complete all as specified & directed.

Supply and fixing PVC (SWR) pipes75 mm bore single socketed in any length with rubber ring joints fixed to walls or laid in trenches or trenches , complete all as specified & directed.

Supply and fixing PVC (SWR) junction single, (double T) equal or un equal of 110mm bore of pipe , complete all as specified & directed.

Supply and fixing PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal, complete all as specified & directed. Make : Finolex/ Kisan/ Supreme/ Prince or equivalent as approved by GE.

Material and labour for preparing new plastered surfaces and applying three coats White wash , complete all as specified & directed.

Material and labour for preparing new plastered surfaces and applying two coats of OBD over a coat of primer over two coats of wall care putty of minimum thickness of 3 mm each etc., complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer, complete all as specified & directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point., complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. by using excavated soil, complete all as specified & directed.

Material and labour for 25mm thick in cement concrete 1:2:4 type B-0 for damp proof course to horizontal or vertical surfaces including necessary formwork, complete all as per architectural drawings and directions given by Engineer-in-Charge.

Material and labour for damp prrof course bitumen blown any grade, applied hot, two coats to concrete surfaces at the rate of 1.5 kg. per sqm per coat , complete all as specified & directed.

Material and labour for boulder filling in trenches interstices to be filled with crushed stone dust n. exc. 25cm thick in layers, including mattering well ramming and compaction , complete all as specified & directed.

Supply and fix factory made MS gate made with 50 x 50 x 5 mm angle frame minimum 1 mm thick plain sheet shutter (door size 2.0 mtr x 1.00 mtr) including with necessary builder hardware such as hinges, sliding door bolt etc, complete all as specified & directed.

(B) PATH/ HARDSTANDING: NOTE :- Items of hardcore, stone filling under floor & Type D-2 (1:4:8) measured under relevant items here-in-before.

Material and labour for Excavating over areas, n exc 1.5 m deep and getting out soft and loose soil, complete all as specified & directed.

Removing excavated material exc 1.50 Km n exc. 5 Km and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified & directed.

Material and labour of Machine pressed precast conctete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment, complete all as specified & directed.

Material and labour for cement concrete type C1, 1:3:6 ( using 20mm graded stone aggregate) as in Coping, complete all as specified & directed.

Material and labour for chequered cement concrete tiles colour glossy finished rubber pressed 30 cm x 30 cm x 25 mm thick set, jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar 1:6, complete all as specified & directed.

Material and labour for precast stone kerb of rubber moulded coloured glossy finished precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate), block of size 30 cm wide & 15 cm thick finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, complete all as specified & directed. Make: As approved by GE.

(C) SEWAGE DISPOSAL: NOTE :- Items of Excavation, Concrete, Brickwork & reinforcement except for septic tank & soakage well measured under relevant items here-in-before.

Material and labour for RCC septic tank with conventional filter designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls, Base Slab, Baffle walls and Roof Slab including beams etc with Vent shaft, manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 100 users complete all as mentioned in TD specified and directed. (Ref CEBZ//TD/77/2011)

Material and labour for Soakage wells excavation, 1.8 M dia X 3.0 M effective depth including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry by using old size sub class 'B' bricks with top ring of M-25 design mix concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as mentioned in TD specified and directed.(Ref CEBZ//TD/78/2011)

Material and labour for Cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in surface channels and drains, complete all as specified & directed.

Material and labour for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 . (reinforcement measured and paid separately), complete all as specified & directed.

Supplying and laying of UPVC pipes (SCH-40) 100mm dia including with all jointing accessories ( bend, 'Y' junction etc), complete all as specified & directed.

Supplying and laying of UPVC pipes (SCH-40) 150mm dia including with all jointing accessories ( bend, 'Y' junction etc), complete all as specified & directed.

Raj Engineering Works

DEESHA CONSTRUCTIONS

Edifice Constructions

Asha Enterprises

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

Bidder Name

Edifice Constructions

DEESHA CONSTRUCTIONS

Raj Engineering Works

Asha Enterprises

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

M/S JAI BHAWANI CONSTRUCTIONS