Name of Work :- Repair of 500 MT Capacity TPDS SFC Godown At- Bishunpura, Chhapra Block, Dist- Saran

Demolishing cement concrete including disposal of material within 50 metre lead:

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with G.I.J. or L hooks . Bolts and nuts 8 mm dia. G. 1. limpet and bitumen washers complete.

Providing and fixing ball bearing for rolling shutters

Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S.sheet gutter with iron brackets 40x3 mm size bolts, nuts and washers etc. including making necessary connections with rain water pipes complete.

Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows all complete with.

Providing & fixing fly proof wire gauze to windows, clere story windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.

Removing white or colour wash by scrapping and sand paper in and preparing the surface smooth including necessary repair scratches etc. complete

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:

Welding by electric plant incluidng transportation of electric welding plant at site etc. complete.

Neat cement punning

Providing and fixing on wall face unplastidsed-PVC(working pressure 4kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing on wall face unplasticised -PVC molded fittings / accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing average 150mm thick dry rammed khoa beaten to112mm (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar(1:10) all complete as per building specification and direction of E/l,

Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

12mm cement plaster 1:3 (1cement :3 coarse sand) finished with a floating coat of neat cement

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer.

Providing and fixing carbon steel galvanised ( minimum coating 5 micron ) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve,including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

Cement plaster in course sand 12 mm cement plaster of mix: 1:4(1 cement :4 coarse sand)

Carriage of Materials

Stonechips - 358 Km

Coarse Sand - 27 Km

Cement Local - 3 Km

Brick Local - 8 Km

Difference Cost of Material

Cement -

Seigniorage Fees

Basic Rate