PERIODICAL SERVICES OF BLDGS AND REPAIR OF DRAINAGE, CULVERT AND PATHWAYS AT JAKLI RTC DHANSAL GE (ARMY) DHAR ROAD

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete, all as specified.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, all as specified .

Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.

Material and labour for brick work with old size sub class 'B' burnt clay bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks (except bricks), straight or curved on plan exceeding 6 metre mean radius in cement mortar 1:6, all as specified.

Material and labour for Plain Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M/L 15mm thick rendering in cement mortar 1:4 in two layers using WPC as per manufacturer instruction on finishing layerof rendering on brick or concrete surfaces finished even and smooth complete all as specified.(Note: WPC shall be measured and paid separately under appropriate item as supply only)

Supply only integral water proofing compond approved brandcomplete all as specified.

Material and labour for Plain Cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.

M& L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, moulds, mitred.

M& L for Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto

M&L for Stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built with CM 1:4 complete all as specified and directed

Stone walling (except stone) of random rubble, uncoursed, well bonded, bedded and solidly hearted, built with CM 1:4 complete all as specified and directed

extra over stone walling for hammer dressing to face hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with granite or trap stone for 20 mm.

Racking out joints/ pointing to masonry or brick work in single detached joints for flashing etc complete all as specified and directed

M&L raised pointing in cement mortar 1: 4 to random of polygonal rubble, uncoursed or brought upto courses complete all as specified and directed

M&L providing pre- cast cement conrete type C-1 1:3:6 (20 mm graded stone aggregate) as bonders in stone walling and set in CM 1:6 complete all as specified and directed

75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair, complete all as specified and directed.

25mm thick sand cushioning for laying of paver blocks complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.

M&L for Factory made, Machine pressed precast concrete interlocking paver block any shape and size approved by EIC, ISI marked (IS:15658-2006) of 60 mm thick, M-35 grade (medium Traffic), with grey cement & pigment, complete all as specified and directed.

M&L Machine pressed gloosy finish cement concrete chequered tiles of size 300x300x25mm, jointed and pointed with mixture of white & grey cement in equal prapotion and pigment to match the colour of tiles complete all as specified and directed.

M&L screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F, Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified.

Demolition of cement concrete ( reinforced) other than ground floors, beams stair cases, landings and similar suspended work (reinforcement cut as required to facilitate demolition) complete, all as specified.

Use and waste Form work to sides and soffits of floor or roof beams,beams haunching,girders,bressumers,lintels cantilever, shelves including supports,over hang etc for flat rough finished surfaces of concrete complete all as specified and directed.

Use of formwork to edges of concrete flats,treads,breaks in floors, window cills,concree walls,floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide for rough finished surfaces of concrete complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for (Columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips concrete complete all as specified and directed.

S&F mild steel TMT bars 6mm to 8 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for (Columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips concrete complete all as specified and directed.

M&L for providing RCC (nominal mix) Type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams, landings, deck slab and in shelves and the like complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L rendering 15 mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L rendering 15 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces finished fair and even (using water proofing compound) complete all as specified and directed. Note : WPC shall be measured and paid separately)

M&L rendering 5 mm thick cement plaster 1:4 on fair faces of brick work or concrete ceiling surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparing plastered new surface of wall and applying one coat of primer on plastered surfaces with alkali resistant priming paint and applying two coats with distemper oil emulsion, white or tinted complete all as specified and directed

M&L for preparing plastered new surface of wall and applying three coats of white washing on undecorated surface on walls complete all as specified and directed

M&L for preparing plastered new and undecorated surface of walls, applying chalk whiting on plastered surface preparatory to distempering and distempering walls with two coats of cement paint white or tinted complete all as specified and directed

M&L for preparing new plastered and undecorated surface of ceiling and applying three coats of white washing complete all as specified and directed

M&L for complete removal of existing treatment and preparing plastered or unplastered old surface of wall by applying one coat of primer on plastered and other surfaces with alkali resistant priming paint incl applying 3 mm thick wall care putty on priming and applying two coats with distemper oil emulsion, white or tinted complete all as specified and directed.complete all as specified and directed

M&L for preparation of old plastered surfaces of wall and applying one coat with distemper oil emulsion, white or tinted complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of white washing complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of white washing complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and distempering with one coat of cement paint white or tinted complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted wooden surfaces of any description, not exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified & directed.

Writing letters or figures(Block, Roman, Italic or Indian) not exceeding 30 cm high with synthetic enamel paint, complete all as specified.

Removal of vegetation from roots etc on wall/Roof area not exc. 1.0 sqm each and making good the surface by grouting the holes and matching the plastered surfaces 15mm thick in cement mortar (1:3) complete all as specified and directed

M/S SANJAY STEEL WORKS

M/S PAWAN KUMAR ANAND