Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.2 LAccepted-AOC | L1 | Accepted-AOC being L1 bidder | |
| 2 | L2₹42.2 L+₹19,848.50 (0.47%)Rejected-Finance 1001 1 AB CIVIL LINES JHANSI 284 001 UP | JHANSI | UTTAR PRADESH | 284001 | L2 | Rejected-Finance not become lowest bidder | |
| 3 | L3₹45.2 L+₹3.2 L (7.58%)Rejected-Finance 05 BABA PALACE MUSRIGHARARI JANDAHA ROAD MUSRIGHARARI SAMASTIPUR BIHAR 848101 | SAMASTIPUR | BIHAR | 848101 | L3 | Rejected-Finance not become lowest bidder | |
| 4 | L4₹46.4 L+₹4.4 L (10.5%)Rejected-Finance 135 CHAKRANA TIWARI CHAKA NAINI PRAYAGRAJ 211008 UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211008 | L4 | Rejected-Finance not become lowest bidder | |
| 5 | L5₹46.5 L+₹4.5 L (10.8%)Rejected-Finance VIJAY NAGAR KUMHARTOLI HANSARI INFRONT OF JIGYASA INTER COLLEGE JHANSI | JHANSI | UTTAR PRADESH | 284001 | L5 | Rejected-Finance not become lowest bidder |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
18 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sunny Kumar Attri
Garrison Engineer Jhansi
SPECIAL REPAIR AND ADDL / ALTN OF BLDG NO P-14 (SINGLE OFFRS ACCN) AND OTHER SANCTIONED MINOR WORKS AT AGE B/R-II UNDER GE JHANSI
2023_MES_591769_1
GE/JHA/TOK/35 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Jhansi
As per NIT and Tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE Jhansi
₹95,000
Yes
1 Jul 2023
27 Apr 2023
20 May 2023
27 Apr 2023
18 May 2023
11 May 2023
27 Apr 2023 - 4 May 2023
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.
M&L for Virified Ceramic tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness complete all as specified and as directed.
All as per item here-in-above but on vertical surfaces such as skirting/dado over and cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness complete all as specified and as directed.
M&L for ceramic colour tiles in vertical surface of size 600 X 300 x 7 mm to 8 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness complete all as specified and as directed.
M&L for semi skid ceramic colour tiles of size 400x400mm, 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness complete all as specified and as directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed.
All as per item here-in-above but not exc 1.5 sqm each complete all as specified and as directed.
Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws complete all as specified and as directed.
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be cceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 5 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered rame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in epth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate imension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% olerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made
Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova 80 to 100mm thick mud phuska/cement concrete/lime cova etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed.
M&L for water proofing treatment for roof by applying priming coat of epoxy primer with resin and hardner in 1:3 ratio with water dilution as per manufacturer instructions, applying 2 coats of solvent based Polyurethane liquid applied membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 kg/sqm (each coat), 2nd coat should be applied once 1st coat becomes dry completely after M&L for 10 mm thick rendering in CM (1:4) mixed with water proofing compound @ 0.20 Ltr/bags on roof surface when concrete is green, complete all as specified and directed. Make :- Asian Paint Ltd/ Choksey Chemicals Pvt Ltd./Sika India Pvt Ltd./Bostic India Pvt Ltd/Fosroc Chemicals/STP Limited / Maruti Bitumen Pvt Ltd/IWL India Limited/Berger Paints India Ltd. Note:(i) The work under this item shall be carried out by the authorized applicator of Manufacturer by using modern techniques. The contractor shall also furnish warranty of quality, finish work and effectiveness of waterproofing treatment under this item for a periof of 10 years from the date of completion along with manufacturer warranty of material for the same period. (II) Height of bldg is more than 10 meters and roof have continous series of trapizium with no staircase to reach at the top of the building The work for Roof Treatment shall include the following and the rates quoted by the bidders shall include the same :- (a) The work pertaining to Roof treatment shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials after approval by the GE. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract.
M&L for sunken floor treatment as follows as follows:- (i) M&L for demolition of cement concrete of any description and in any position of WC’s/Bathroom/ Kitchen etc in sunken portion area, removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed. (ii) M&L for application/forming of waterproofing liquid membrane moistening the prepared surface for proper dispersion and penetration and applying two component cementitious elastomeric water proofing coating damp block 2k as per manufacturers specifications. The treatment shall be carried out to the entire bottom surface and vertical surface upto the bottom height of wall tiles. Adequate curing to be done on vertical surfaces and ponding test for 48 hours on the bottom surface to be carried out complete all as specified and directed. Make :- Asian Paint Ltd/ Choksey Chemicals Pvt Ltd./Sika India Pvt Ltd./Bostic India Pvt Ltd/Fosroc Chemicals/STP Limited / Maruti Bitumen Pvt Ltd/IWL India Limited/Berger Paints India Ltd. NOTE : (a) Warranty for water proofing to be submitted by the contractor as per manufacturer norms (b) M&L for rendering 15 mm thick in CM 1:3 on fair faces of brick work and concrete surfaces duly mixed with liquid WPC @ 150 ml in 50 Kg of cement by weight, on vertical and bottom surface, complete all as specified and directed. (c) M&L for 25 mm thick PCC 1:2:4 type B0 (12.5mm grade stone aggregate) as in padding duly mixed with liquid WPC @ 150 ml in 50 Kg of cement by weight, complete all as specified and directed. (The WPC will be measured and paid separately.) (d) M&L for PCC 1:5:10 type E2 (40mm grade stone aggregate) as in mass concrete, filling in two layers in sunken portion, complete all as specified and directed. (e) spouts of 25mm dia GI pipe light grade projecting 450mm clear of face outer a wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water ,including cutting holes and making good if needed as specified and directed. (f) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract. Warranty for water proofing to be submitted by the contractor as per manufacturer norms
S&F for 6 mm thiick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.
S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.
Taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern, complete all as specified and directed.
S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.
S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.
S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.
S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.
S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.
S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.
S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed.
S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed.
Taking down steel tubing with and incl connections, of 15 mm dia bore, complete all specified and directed.
Taking down steel tubing with and incl connections, of 20 mm dia bore, complete all specified and directed.
M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 15 mm bore, concealed or exposed, complete all as specified and directed.
M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 20 mm bore, concealed or exposed, complete all as specified and directed.
S&F 25 mm thick prelaminated WPC board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to pvc/steel/timber frame work in any situation as in cup board shelves/shutter or similar work inclding dismantling of old board in any position, complete all as specified and directed.
S&F SS continous piano hinges 40 mm, complete all specified and directed
S&F SS fancy handles for cabinet including all accessories complete all specified and directed
S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed.
S&F 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as specified and directed.
S & F 20 mm bore Gun-metal, ISI, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in repairs 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair of PVC waste pipe 32 mm dia 750 mm long for wash hand basin , complete all as specified and directed.
S&F in replacement of Stop cock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions, complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long,complete all as specified and directed.
M&L in repair for stainless steel curtain rod 25mm dia with caps/lobs and wall mounting bracket cutting in to length required at site complete all as specified and directed.
S & F in repair Chromium plated shower rose 200 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 mtr long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.
S&F in replacement of 3-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upperside, connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as specified and directed. Make : Hindware(Cat No-F390020)/ Cera(F1003401)/ Prayag(Cat no-8175Niagara) or equivalent approved
S&F in replacement of bottle trap 32 mm sizewith 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.
Providing and fixing Table Top white Vitreous China wash basin of specified size and model, 32mm CP brass waste coupling, C.P brass mixer 15mm size having long neck and Aerator, C.P brass bottle trap 32 mm size, extension pipes, wall flanges and concealed G.I clamps complete including making necessary holes and other cutting in the counter top and fixing the wash basin, tap rigidily including making good the walls wherever required all complete as directed by Engineer-in-Charge. "Make of Wash Basin : Cat No.91097 of Hindware (390x390x150 Oval shape) or equivalent of approved makes. CP brass pillar cock Model No. 570012 of Hindare make or equivalent) C.P. Brass bottle trap (Model No. F85003 250X175 of Hindware make or equivalent) (The rate is inclusive of wash basin, waste coupling, pillar cock, bottle trap, brackets, all other fittings and accessories required for completion of work. For the purpose of payment, only the number of wash basins provided and fixed in position shall be considered)
S&F in replacement of pillar mixer taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed. Make: Jaquar, Kohler, Hindware(Ist Quality) or equivalent approved
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing flushing cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including soft closing seat cover, and cistern fittings, nuts, bolts, plates and gasket etc complete all as specified and directed by Eng-In-Charge. Make : EWC-Cat No. 20132(P-22) of Hindware (51X36X35 cm) or equivalent, Concealed Cistern- Cat No. 518237 half frame incl acc. of Hindware or equivalent approved
S&F in replacement of towel rail 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware/ Cera/ Parryware or equivalent approved
S&F in replacement of PVC waste pipe 32 mm dia 750 mm long with for wash hand basin or for kitchen sink, complete all as specified and directed.
M&L 20 mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed.
Demolition of RCC not exc 15cm thickness Roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab and similar suspended work complete all specified and directed.
M&L for RCC 1:2:4 (Nominal Mix) (using 20 mm graded stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all specified and directed.
M&L for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all specified and directed.
M & L Form work to flat soffits of suspended slabs such as roof slabs, floor slabs and lintels, landingand similar work n exc 200mm thick complete all specified and directed.
Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for half brick thick wall with fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.
Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.
M&L for 15 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a coat of primer and a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.
M&L for preparation of new plastered applying two coat of weather proof exterior grade emulsion paint over and incl one coat of exterior grade cement based primer, complete all as specified.
M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping and applying two coat of oil bound distemper over a layer of 1 mm thick (JK/Birla) wall care putty to get smooth and level finish, complete all as specified and directed.
M&L for preparation old ceiling surface and applying one coat of OBD on ceiling surface, complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coat of weather proof exterior grade emulsion paint over and incl one coat of exterior grade cement based primer complete all as specified. Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer's drums with seal intact.
Demolition of cement concrete in ground floor including terrazo flooring and paving n exc 15cm thickness (below or above the ground level) built in cement mortar. Complete all as spd
M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all specified and directed.
M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, including in CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion shall be measured and paid separately.
M&L for sand filling under floor or in foundations incl watering and consolidation, complete all as specified and directed
M&L Plain Cement Concrete type B-1 1:2:4 (20mm graded stone aggregate) as in levelling course and coping benching etc complete all as specified and directed.
S&F SS grating of round shape dome type 4" to 5", floor trap traps etc, complete all as specified and directed. Make : Cera / Parryware / Prayag (Cat No- FT 03 M) or equivalent approved
M&L for Non -skid ceramic coloured tiles endura Size 400X400X10mm thick, outdoor tiles in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as sppecified and directed.
M&L 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate bedding of tiles/Kota stone complete all specified and directed.
Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
M&L rolled mild steel Fe-410 WA Grade E 250 in Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
S&F Stone coated metal sheet banglore tile finish Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall and ridge , fixed with self tapping screws complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.
M&L for point wiring for modular fittings complete with 1.5 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall including provision of modular cover plates with frames and 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLSH) cable for common earth and connecting to earth dolly all as specified and directed by Enrg-in-charge. (Note- rates of chase cutting & making good shall be included in the unit rate) :-
One light point controlled by one switch
One Exhaust fan point controlled by one switch.
One ceiling fan controlled by one switch and one regulator
One Bell point controlled by one switch
One 6A socket point controlled by one switch on independent board
One 6A socket point controlled by one switch on same board
All as per srl item no. 83 here-in-before but with 4.0 sq mm FRLSH copper wire with 4.0 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.
M&L for Circuit/submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length
All as per srl item no. 85 here-in-before but 2runsX4 Sqmm +1runX4Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length
Notes for item No. 83 to 86 (i) Quoted rate shall deemed to incude the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & caping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing caping may be used in that portion.
Supply and fix Modular switch 1 way 6A, 1 module 240V, 50Hz with required modular white cover plate with frame complete all as specified and directed.
Supply and fix Modular switch 1 way 16A, 1 module 240V, 50Hz with required modular white cover plate with frame complete all as specified and directed.
Supply and fix Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz with required modular white cover plate with frame complete all as specified and directed.
Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz with required modular white cover plate with frame complete all as specified and directed.
S&F Modular angle holder, metal cased, bakelite body, 240 volts, complete all as specified and directed.
Supply and fix Modular Bell push 6A 1 module, 240V, 50Hz with required modular white cover plate with frame complete all as specified and directed.
S&F electric bell of DINGDONG type, 240 volts, single pole and making all necessary connections, complete all as specified and directed.
Supply and fix Modular fan regulator step type in 5 steps, 240V, 50Hz with required modular white cover plate with frame complete all as specified and directed.
S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.
S & F 7W White LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink complete all as specified and directed.
Supply and fix integrated LED batten 20 watt, 4 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed.
Supply and fix integrated LED batten 20 watt, 4 feet long, twin light (cool white & warm white) in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed.
Supply and fix LED batten 10W (2 Feet) complete with polycarbonate diffuser and built in with electronic driver including connecting up with twin core twisted flexible copper conductor cable form ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.Make:
Supply and fix in replacement of Decorative wall light fixture made up of Polycarbonate with and including 7W retrofit LED lamp, full white of approved model including taking down existing unserviceable light fitting of any description complete all as specified and directed.
Supply and fix in replacement of sleek round recessed cum surface mounting LED down light 10 W with aluminium die-cast body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation including taking down existing unserviceable light fitting of any description complete all as specified and directed.
Supply and fix LED building security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP 65degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in replacement of LED bulkhead luminaire 10W in die-cast aluminium alloy/ PVC body heat resistant prismatic glass cover, with specially designed gasket for minimum IP 55 degree of protection complete all as specified and directed by Engineer-in-Charge.
Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 25A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately.
Supply and fix MCB distribution board, SPN, 8 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separetely.
S& F MCCB TPN 100 Amp, 16 KA, 'C' curve, 415 V, 50 Hz complete all as specified and directed.
S& F MCB SPN 40 Amp, 10 KA, 'C' curve, 230 V, 50 Hz complete all as specified and directed.
All as per srl item no. 108 here-in-before but SP 6 to 32 Amp, 230 V complete all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 25 sq mm 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down existing service cable of any description complete all as specified and directed.
Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of GI Pipe and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.
Supply and fix ceiling fan, 1200mm sweep, 3 blade, white colour, energy efficient, star rated 50W / 52W power cosumption, minimum 310 RPM, 100% copper winding motor with and including down rod, canopy (02 Nos), GI fan clamp with rubber bush, GI nuts, bolts and split pins etc (without regulator) and connecting up with 3 core x 0.5 sqmm flexible copper conductor cable from ceiling rose to connector of fan including taking down complete all as specified and directed.
Supply and fix in replacement of ventilating fan with plastic body with louvers, 250mm sweep, single phase, 230 volts, 50 Hz. complete all as specified and directed.
Supply, installation, testing and commissioning of air cooled split type Air conditioner of 1.5 TR capacity, wall mounted type, comprise of copper pipe heat exchangers, having R-410A refrigerant, electric driven, 230 volts AC, single Phase, 50 Hz, having either Five Star rating or inverter technology, with and incl inlet/outlet copper pipe for refrigerant between indoor & outdoor unit and flexible copper wire of suitable size as recommended by manufacturer, complete all as specified and directed. Note : 1. The split type Air conditioner shall comprise of one indoor and one outdoor unit with connected piping duly insulated and connecting cable of required length 2. The cost of making opening for passing through inlet/outlet copper pipes and electrical cord and making good of surface as original by plastering / whitewash / colour / distemper etc is included in quoted rate and no extra payment will be made to contractor to this effect.
M/S NASIM AND CO.
M/S BABA CONSTRUCTION
VIJAY BUILDERS
ARTISTIC BUILD CO
Khushi Muskan Engineer & Developer
A K ENTERPRISES
M/s JS Constructions
M/S Nextage Construction
FTH Traders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .