SPECIAL REPAIRS TO T-16 AND T-01 AT KHETOLAI, P-100/01 TO 100/04 AT MIL STATION POKARAN UNDER AGE (I) POKARAN

Amount

Dismantling of Stone slabs and tiles of any description or thickness in floors, walls, aprons etc. laid bedded and pointed in any mortar, removing serviceable tiles to store and rubbish off the premises.

Dismantling of floors health or walls tiling and Stone floor including cement mortar bedded (but not backing) & removing serviceable tiles to store and rubbies of the premises

M&L for vitrifiled ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles n exc 0.36 sqm in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and directed by Engineer Incharge.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick, (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm (including size 400mmx400mm), as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.

S&F joint free non skid ceramic coloured tiles 7 to 8mm thick(square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors laid over & incl 15mm thick screed bed of CM 1:6 ,etc set and jointed in neat cement slurry and pointed in white or colored cement to match.

. --Ditto-- all as per item No 04 above but as in skirting over & including 10mm thick backing coat of CM 1:4 all as specified.

S&F coloured glazed ceramic tiles size 300x350x7mm /450x350x7 mm thick on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including backing coat of 10mm thick in CM (1:4) all as specified & directed by Engineer-in-charge.

M&L 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M & L for 5cm sand stone slabs in shelves & similar works, etc. n exc. 2m in length, punched dressed on face and along exposed sedes, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete as specified & directed by Engineer-in-charge.

M&L for roughly squared stone 5cm thick as in lintels n exc 3m in length, hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of 15 mm thick in CM (1:6) all as specified and directed by Engineer-in-charge.

M&L for machine cut kota stone slab 20 to 25 mm thick as in riser of steps, skirting & dado and laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick backing coat in CM (1:4) complete all as directed by Engineer-in-charge.

M&L for green marble 18 to 20mm thick, prepolished, as in window & ventilator cills in single length including beding of cement mortar 1:4 fixed & pointed all as specified & directed by Engr-In-Charge.

Supply only integral Waterproofing compound.

M&L for water proofing treatment with 3 mm thick APP (Actatic Poly Propylene) modified membrane reinforced with non woven polyester mat of weight 150 gms/sqm as centre core & without multiple layers of polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane after applying a coat of bituminous primer @ 0.3 kg/sqm over roof (an overlap of 100 mm & 150 mm shall be provided on sides & end respectively )including a coat of bitumen grade 85/25 @ 1.20 Kg/Sqm and applying one coat of aluminium paint @ 100ml/sqm on top of APP membrane to get uniform finish complete all as per specified and directed including following (i) Complete removal of existing water proofing treatment incl bedding if any n exc. 50mm thick etc. on any type of roof, cleaning with wire brushers etc. and removal of debris out side MD land complete all as specified and directed. (ii) M&L for 50 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied as per the requirements all as directed by Engr-in-Charge. (iii) M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only)

Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water all as specified

M&L for rendering 15mm thick plaster on fair faces of brick work or concrete sur faces in cement mortor (1:6) finished the surface even and smooth without extra cement.

M&L Rendering 15mm thick on fair faces of brick work or concrete sur faces in CM (1:4) finished the surface even and smooth without extra cement.

M&L for 5 mm thick , plaster in cement mortar (1:4) on surfaces of ceiling and finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 10mm thick in 1:3 cement plaster on ceiling of stone surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over 3 mm thick wall care putty including one coat of primer all as specified & directed by Engineer-in- Charge.

M&L for preparation of plastered surfaces of ceiling and applying three coats of white wash all as specified & directed by Engineer-in- Charge.

M&L for complete removal of existing treatment of wall surfaces and finishes wall with Acrylic emulsion smooth eterior paint of reqd shade, new work (two or more coat) applied @ 1.67 lit/ 10 Sqm over and incl priming coat of exterior primer applied @ 2.2 KG/ 10 Sqm all as specified & directed by Engineer-in- Charge.

Finishing wall with Acrylic emulsion smooth exterior paint of reqd shade, new work (two or more coat) applied @ 1.67 Ltr/10 Sqm over and incl priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete.

M&L for Complete removal of existing treatment of wall surfaces and applying two coats of oil bond distemper over one coat of primer including 3mm thick wall care putty on wall all as specified & directed by Engineer-in- Charge.

M&L for Complete removal of existing treatment of applying a three coat of white wash on surfaces of ceiling complete all as specified & directed by Engineer-in-charge.

Taking down door chowkhat or frame with shutter (without taking off shutters from the frame) area n exc 1.00 sqm each complete all as specified & directed by Engineer-in-charge.

Taking down door shutter area exc 1 sqm but n exc 2 sqm each

Taking down door chowkhat or frame incl shutter area n exc 1.50 sqm each

Taking down door chowkhat or frame incl shutter area exc 1.5 sqm but n exc 4.0 Sqm complete.

S&F, Powder coated, anodised aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, etc complete all as specified & directed by Engineer-in-charge.

M&L for powder coated anodised aluminium door shutter, aluminium section wt 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete.

M&L for powder coated anodised aluminium window and ventilator shutter, side hung type without sash bars aluminium section wt 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws , anodised alu fittings such as peg stays 150 mm long 01 no, hinges type B-21 100 mm long 02 no, suitable handle 01 no, etc complete.

M&L for sheet glass 4.80mm thick, ordinary quality and glazing with, rubber packing n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

S&F 35mm thick factory made plain framed, panelled shutters (single panel)) With lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated all as specified.

S & F, 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed by Engineer-in-charge.

S & F pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. all as specified and all as directed by the Engineer-in-Charge

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105x60mm all as directed by the Engineer-in-Charge

M&L PCC 1:2:4 type B-0 for filling in pressed steel door frame complete all as specified and as directed by the Engineer-in-Charge

S&F mild steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks forhanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as directed by the Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided all as directed by the Engineer-in-Charge

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe 290.Gde-E-165 all as directed by the Engineer-in-Charge

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specification & drawing all as directed by the Engineer-in-Charge

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

M&L for 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , both face is covered with deco rative face veneer with lipping/frame all as directed by the Engineer-in-Charge

Second class HW rail and style plain frame factory made moulded panelled shutter 35 mm thick (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veeneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated all as directed by the Engineer-in-Charge

M&L for II nd class hard wood Glazed and skeleton shutters, 35 mm thick , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats

S&F Factory made Box Type steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay , complete without glazing bars, dovetailed or complete as shown in Drawing No. CEJZ/TD/22 sh 1/1 to 1/3, and all as specified & directed by Engineer-in-Charge.

S&F MS butt hinges 100mm long cold rolled medium weight complete all as specified and as directed.

S&F Aluminium handle, cast type, anodiesed of size 150 mm & fix to shutter complied all as specified & directed by Engineer-in-Charge.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 150mm

S&F 300mm long aluminium alloy, anodised, sliding door bolt and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium and fixed.

S&F 2 levers brass mortie lock vertical type, size 100 mm

M&L for double action door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium sheet foundation box ,main body with stainless steel cover, grovering piovt made of brass, other parts made of mild steel heavy duty and fixed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm size.

S&F stainless steel wire 0.36mm normal dia of wire and average width of aparture 1.40mm complete all as specified & directed by Engineer-in-charge.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqn in each pane.

S&F 4 mm thick figured glass, pin headed type and glazing with oil putty in square n exc 0.50 sqn in each pane.

M&L for preparing new/previously untreated steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer

M&L for preparing new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S& F 25mm thick , Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneers on both faces, fixed with screws to timber frame-work

S&F Secound Class Hardwood, plain fillets square rectangular or trangular in section wrought sectional area exceeding 3 sqcm and n exc 6 sqcm fixed with nails, bullnosed, splayed, chamfered or rounded on one edge or face

M&L for 12 mm thick vaneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on both faces, fixed with screws to timber frame work complete.

S&F prelaminated particle board interior grade, prelaminated both side 18/19 mmthick with decorative choice lamination,fixed with screws to timber framework complete.

S&F 125 mm long hasp and staple, allumuniun anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 40mm ( when open)

S&F 40 mm knobs of brass, polished fixed with nut screw &washer bright finished complete

Ball catcher with 8 mm dia steel ball and brass body and skirting plate including leting in and fixed complete all as specified and directed.

S & F 100 mm long Extruded aluminium alloy handles, fabricated type., anodised

S&F in repair decorative type curtain rod, stainless steel 25 mm dia with not less than 1 mm wall thickness complete all as specified and directed by Engineer-in-charge.

S&F in repairs decorative type bracket, stainless steel, suitable for above curtain rod complete.

Demolition of cement concrete unreinforced in groundfloors and pavings not exc 15cm thickness below or above ground level etc all as specified and as directed by Engineer-in-Charge.

M&L for 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregates) as in plinth protection finished even and fair w/o using extra cement

Dismantling of water tanks and removing to store capacity of tank exc 250 and n exc 500 ltr.

Supply and fix rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,500 ltr capacity including, 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed

Cutting chases, pinning in Stone concrete block or slab walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc including taking up or down steel tubing and connections including cleaning for refixing or removal to store 15 mm bore to walls, ceiling etc All as specified and directed by Engineer Incharge.

S&F Medium grade GI tubing 20 mm bore with all fittings , to walls, ceiling or laid in floors etc taking up or down steel tubing and connections including cleaning for refixing or removal to store 20 mm bore to walls, ceiling etc All as specified and directed by Engineer Incharge..

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 20 mm bore pipe.

S&F in repairs for stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore in repairs

S&F in repairs 15mm dia fancy type bib taps cast copper alloy chromoum platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete

S&F in repairs Viterious china White Wash Hand Basin of size 450 x 300 mm fixed in repairs includign 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia & 15 mm PTMT connection pipe 450 mm long

S&F Viterious china White Wash Hand Basin of size 580mm x 450mm including 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia & 15 mm PTMT connection pipe 450 mm long, in repairs.

S& F in repairs vitreous China white, approximate size 160x 160x90mm Soap dish, any type, fixed to plugs with chromium plated brass screws complete.

S&F towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats in repairs (Minimum weight 190gms)

S&F 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes: including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified.

S&F in repair CP Shower rose 125mm size with swivel joint including fixing sted pipe for union.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts to length 450 mm as in repairs

S&F PVC flushing cistarn 10 ltrs capacity ISI marked incl PVC damtake pipe PVC 450mm inlet etc all complete in repairs.

S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Cutting holes in to or through in stone walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required, exc 150sqcm & n exc 400 sqcm complete all as specified and directed,

Demolition and breaking up of cast iron RCC, AC or PVC pipe jointed in CM any dia bore complete

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let

PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia out let.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls

S&F PVC (SWR) pipes of 75 mm dia, single socket fixed to walls

S&F 100 bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof.

S&F PVC (SWR) bends with access door of 110 mm dia, any radius

S&F PVC(SWR) bends with access door of 75 mm dia, any radius

S&F PVC (SWR) junction single tee equal or unequal 110 mm dia. With access door

S&F PVC (SWR) junction single tee equal or unequal 75 mm dia With access door

S&F PVC (SWR) bends of 110 mm dia, any radius

S&F PVC (SWR) bends of 75mm dia, any radius

(PVC (SWR) vent cowl, 110 mm dia

Demoliton of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similars complete

M & L Reinforced cement concrete 1:2:4 type B0 12.5 mm graded stone aggregates ( Nominal mix ) as in Slab, chajjas & parapets complete all as specified and directed.

M&L form work to sides and soffits of flat Slab, chajjas & parapets complete all as specified and directed.

M&L TMT bars 10mm dia & over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L TMT bars 6-8 mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Demolition of stone masonry built in cement mortar including all quoins arches pillars etc all as specified

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed by Engineer-in-Charge.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out soft/loose soil complete.

Returning, filling in excavated approved soil,(soft/loose soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete.

Removing excavated soil not exceeding100 m and depositing where directed at a level not exceeding 1.5m above the starting point complete.

Demolition and breaking up drain pipes (salt glazed ware or AC or reinforced concrete) 150 mm set in cement mortar all as specified.

M&L for cement concrete (1:3:6) type C-2 to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia bore of pipe.

M/L Precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 complete (reinforcement to be measured separately)

Cutting holes into or through concree walls in CM for connection to existing manholes and making good to wall with PCC (1:2:4) type B-1 rendering cutting out branch piece of channel and making good for 150 mm dia pipe.

Disconnecting existing tanks of capacity exc 250 & n exc 500 ltrs for repair roof padding, reconnecting and refixing in position after repair the roof complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 500 & n exc 1000 ltrs for repair roof padding, reconnecting and refixing in position after repair the roof complete all as specified and as directed.

S&F rotational moulded polythene water storage tank of 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) including dismantling of water tank capacity exc 500 ltrs and n.exc 1000 ltrs and removing to store all as specified in SSR Part I all as specified and as directed by the Engineer-in-Charge

M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete complete all as specified and as directed by the Engineer-in-Charge

M&L for PCC type D2 1:4:8 using 40mm graded stone aggregate, 75 mm thick as in sub base for floors, complete all as specified and as directed by the Engineer-in-Charge

M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in CM 1:3 as directed by the Engineer-in-Charge

M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6, except stone slabs complete all as specified and as directed by the Engineer-in-Charge

M&L for Flush Pointing single joints in brickwork or masonry in detached work, flashings, etc. on ceiling in CM (1:4) complete all as specified & directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410-W (Gde E-250) quality A

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates,Fe 410-W (Gde E-250) quality A

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc ) or insulation boards/slabs/blankets any thickness including cover fillets

S&F for anodised aluminium snap grid 605 x 605 mm frame work for false ceiling all as specified and directed,Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

M&L for providing and fixing Gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions.

Taking down carefully point wiring of any type (i.e. on wooden batten, surface conduit, casing-N- capping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, conduit etc. including accessories such as wooden gutties/rawal plug, screw etc including making good disturbed surface to match the existing surface all as specified & directed.

Taking down carefully MCB DB SPN/TPN of any type etc including making good disturbed surface to match the existing surface all as specified & directed.

M&L for point wiring with PVC unsheathed cable single core stranded copper conductor 1.5 sq mm size, 1100 V grade, drawn into casing & caping (ISI marked) not less than 20mm dia on surface with and including PVC unsheathed cable single core copper conductor 1.5 Sq mm as continuous earth wire and including pressed MS sheet sunk in box 1.12 mm thick with 2.8 mm thick laminated bakelite sheet all as specified & directed by Engr-in-charge for the following :-

(a) One light/fan/Exh/Bell point controlled by one switch 5 Amp one way

(b) -Ditto- all as per item no 145.but socket outlet 3pin 5 amps same board

(c) -Ditto- all as per item no.145 but socket outlet 3pin 5 amps independent board

(d) One ligh point controlled by two 2-way swith

All as per ser item No 145 here-in-before but one bell point controlled by one way bell push.

-Ditto- all as per item No. 145 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge

S & F switch piano, flush type ,single pole , one way 5 amps 230V ac confirming to IS: 3854 and ISI marked complete all as specified and directed by Engr in Charge .

S & F socket outlet 6 Amp , 5 pin flush type multi purpose 230V ac complete all as specified and directed by Engr in Charge.

S & F switch piano, flush type single pole , one way 15 amps 230V ac confirming to IS: 3854 and ISI marked complete all as specified and directed by Engr in Charge.

S&F Modular switch one way 6 Amp single pole , one module.

S&F Modular bell push 6 Amp, 230 volt & one module complete all as specified.

S&F Modular socket 6 Amp 2/3 pin combined 2 module shattered ISI marked confirming to IS 1239 : 1997 having finger proof terminals with captive screws having front fixing & removing features without removing plates.

S&F Modular socket 6/16 Amp 2/3 pin combined 2 module shattered ISI marked confirming to IS 1239 : 1997 having finger proof terminals with captive screws having front fixing & removing features without removing plates.

S&F Modular switch 16 Amp single pole one way, 1 module ISI marked confirming to IS 3854 : 1997 or latest IS having finger proof terminals with captive screws having front fixing & removing features without removing plates.

S & F socket outlet 2 in 1, 6 pin 16 Amp , 230V ac cconfirming to IS: 3854 and ISI marked complete all as specified and directed by Engr in Charge.

S&F Electronic type modular fan regulator step type 120 watt, 230 volt. 2 module

supply and fixing fan regulator electronic type five step controlled 230 volt 50 Hz for confirming to IS: 3854 and ISI marked complete all as specified and directed by Engr in Charge .

S & F Bell push switch piano, flush type ,single pole ,230V AC confirming to IS: 3854 and ISI marked complete all as specified and directed by Engr in Charge .

S & F two way pt switch piano, flush type ,single pole ,230V AC confirming to IS: 3854 and ISI marked complete all as specified and directed by Engr in Charge .

S&F Sheet metal enclosure DB TPN 415 Volt 4 way double door type with 200 Amps rated bus bar for fixing MCB

S&F Sheet metal enclosure DB SPN 240 Volt 8 way double door type with 240 Amps suitable for housing of MCBs grouting/flush in wall and making good to distrubed surface incl fixing material/accessroies complete all as specified and directed by Engineer Incharge

S&F MCB SP 240 volts, 6 to 32 Amps, 10 KA,C series

S&F MCB SPN 240 volts, 32 Amps, 10 KA C series

S&F MCB TPN 415 volts, 63 Amps, 10 KA, " C " Series

S&F Lamp holder PVC polycarbonate type with back plate suitable for battern fittings

S&F B22 base 13 watt 4 star rating LED lamp all as specified and directed at site

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified.

S&F Bell, Ding Dong AC. 230 volts,single pole

S & F LED tube fixture/fitting 1x 20watt, decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy eficient ready to use prewired for including connecting up with twin core twisted flexible copper conductor cable with suitable size complete and all as specified and directed by Engineer- in Charge.”.

S & F LED building Security light fitting 1x20 watt new generation energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top opening separate driver with IP 66 protection and impact resistance of IK07 complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of size 1.5 sq mm including GI tubing 40mm dia light grade 1.5m long band to shape for mounting of security light with 2 nos MS,FI clamp including plinth with nut bolts etc complete all as specified and directed Make: Havells/Philips/Bajaj

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'medium grade', watering pipe 20 mm dia GI 'Medium grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 5 of MES SSR Part-I 1991 print and as directed .

S & F 10 watts white battern LED mirror light fitting provided with high output diffuser size of Two feet 230 volt,50 Hz

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store

M&L for submain wiring with PVC unsheathed cable single core stranded copper conductor 6sq mm size, 1100 V grade, drawn through PVC casing and caping (ISI marked) not less than 25mm dia on surface with and including PVC unsheathed cable single core copper conductor 6.0 Sq mm as continuous earth wire and all as specified & directed by Engr-in-charge.

Taking down old u/s Gyser from Bathroom 0f 25 ltrs single phase(Old u/s geyser will be deposted at MES store for reuse.

Refixing of existing Geyser of cap 25 ltr at it original location obtained from item no 28 above complete all as specified.

Fixing only existing serviceable 1 x 20 watt tube light fitting with electric connection etc complee all as specified and directed at site.

S&F in replacement service bracket for street light fitting made out of 40 mm bore light grade GI pipe of length 1.2 mtr long (approx) bend to shape 115 degree and fix to pole for fixing of street light fitting on pole/wall etc fixed with 2 Nos 32x 6 mm GI clamp, Nut,bolts,washer etc complete all as specified and directed.

S&F FR PVC Insulated Single Core 0.5 sqmm Unsheathed Industrial Flexible Cable conforming to IS 694:2010 with Bright Annealed Copper Conductor for Voltage Grade 1100 Volts

rathore construction co.

M/s Shri Inder Construction Company