Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹11.7 Laccepted-aoc | accepted-aoc |
Tender Value
₹16.9 L
EMD Value
₹42,500
Closing Date
5 Mar 2026, 9:30 pmClosed
Bengaluru Central City Corporation
Ramesh H V
Maintenance & repair works to parks lighting system by providing Poles, UG Cable and repairs to control panels under Gandhinagar Constituency Under BCCC, POW 2025-26.
BCCC/2025-26/EL/WORK_INDENT199
BCCC/2025-26/EL/WORK_INDENT199
Open
Electrical
Electronic Documents, First(One Cover)
BCCC Electrical Division
4 documents required · 4 mandatory
₹500
₹42,500
5 Mar 2026
24 Feb 2026
4 Mar 2026
Maintenance & repair works to parks lighting system by providing Poles, UG Cable and repairs to control panels under Gandhinagar Constituency Under BCCC, POW 2025-26.
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, in...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection...
Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires.
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (ordinary) 2019-20 KPWD SR
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff (L T Cable) 2.5 sqmm to 25 sqmm
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sq...
1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995 3x16 + 1x25 + 1x16 Sqmm Street light (Insulated Messenger cum Neutral) 284816 Street light (Insulated Messenger cum Neutr...
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations. Piercing Connector Suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connection
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Pre - Insulated Lug - CPTAU for 16 Sqmm
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Pole Clamp for HT/LT AB cable
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm, S R 2019-20 KPWD SR
Fabricating supplying and mounting MS box made out 14.SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation,...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 4...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 65 A
Supplying 100 amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63A
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.
Painting of existing street light pole after scrapping the old paint and painted with suitable colour enamel/Silver paint including coping/footing of the pole. upto 5 m street light pole.
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long uried in a pit . The pit should...
Erection of Poles Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
tender no 2 notification.pdf
Others - Tender Notification • 1.45 MB
Gandhinagar park.pdf
Tender Document • 1.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .