KMC/NBG/LTG/CRM/e-11/25-26

TOTAL

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supply ,Installation of Chimney Base Plate(upper side) made of 25 mm MS plate in circular size of inner diameter 1000mm & outside diameter of 1600mm( with hollow section of inner dia. 1000mm) complete in all respect incl. necessary welding of the conical part in the inner perefery

Supply,Installation of Triangular gusset in between upper base plate & Bottom base Plate of size 200mmx150mm made of 25mm thick MS plate incl. all necessary welding in the base plates.

Supply,Installation of rectangular gusset in between upper base plate & Bottom base Plate of size 200mmx200mm made of 25mm thick MS plate incl. all necessary welding in the base plates.

Supply, intallation of conical section at the lower portion of chimney of size reduced from 1400mm to 1300mm (bottom to top) and length of 2500mm with 12mm thick MS sheet to be welded on the bottom base plate having flanges in the upper side (i.e. 500mm dia)with 75x8 flat complete in all respect incl. necessary welding,drill holes, nuts etc.

Supply, intallation of conical section at the lower portion of chimney of size reduced from 1300mm to 1200mm (bottom to top) and length of 2500mm with 12mm thick MS sheet to be welded on the bottom base plate having flanges in the upper side (i.e. 500mm dia)with 75x8 flat complete in all respect incl. necessary welding,drill holes, nuts etc.

Supply, intallation of conical section at the lower portion of chimney of size reduced from 1200mm to 1100mm (bottom to top) and length of 2500mm with 12mm thick MS sheet to be welded on the bottom base plate having flanges in the upper side (i.e. 500mm dia)with 75x8 flat complete in all respect incl. necessary welding,drill holes, nuts etc.

Supply, intallation of conical section at the lower portion of chimney of size reduced from 1100mm to 800mm (bottom to top) and length of 5000mm with 12mm thick MS sheet to be welded on the bottom base plate having flanges in the upper side (i.e. 500mm dia)with 75x8 flat complete in all respect incl. necessary welding,drill holes, nuts etc.

Supply, fitting fixing MS circular duct made of 8 mm thickness plate, 800 mm dia. having both end circular flange welded 75 mm widt x 6 mm thickness with mounting drill holes 13 mm dia. drill holes as per direction of Engineering-in-charge.

Supply, fitting, fixing Chimney Hood of conical shape of 1000 mm dia, 500mm height with MS 8mm thick sheet & to be fixed at the top of the chimney with necessay MS flat in order to prevent entry of any foreign material from outside to chimney

Supply, Fixing of Ladder of length 20mtr.(approx) ground level to top of chimney & platform complete in all respect

PWD BUILDING WORKS/page no-103/item no-1(F) A. 7 (i) (a) SUPPLYING, FITTING, FIXING BOLTS WITH NUTS, WASHER (I) 20 TO 25 MM DIA: (A) LENGTH Above 150mm

UDMA Electrical - Mechanical Schedule Page No.40/Sl.No.37 Supply and delivery of Neoprene Rubber Sheet- 5 mm thickness.

PWD Bldg. Schedule 2017/Item No.6/Page-03 Hire and labour charges for shoring work(including necessary close plankwalling,framing,eucalyptus/jhou bulloa p[illing,strutting etc.)complete as per direction of the Engineer-in -charge for foundation excavation(vertical surface are in contactwith supported earth is to be measured)(This item should be executed on specific direction of the Engineer-in -Charge) b) For additional depth beyond 1.5 m upto 3.00m

PWD Building Works/ Page No.43/Item No. - 1(C) A 40(a)(i) I Reinforcement for reinforcement concrete work in all structures including distribution bars, strips, binders etc. initial straightening and removal of losse rust(if necessary), cutting requiste length, hooking and bending to currect shape, pleasing in proper position and binding with 16 guage black annelad wire at every intersection complete as per drawing & direction.

PWD Building Works/ Page No.41/Item No. - 1(C) A 33 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6 mm normal size) excluding shuttering and reinforcement (if any in ground floor as per relevant IS codes)

PWD Building Works/ Page No.43/Item No. - 1(C) A 39 Extra for high scafolding in water tank for repairing, painting etc.

PWD Building Works/ Page No.200/Item No. - 1(K) A 2(b)(iv) Painting with bast quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using approved putty etc. on the surface.

PWD Building Works/ Page No.200/Item No. - 1(K) A 1(a) Priming one coat on steel or other surface with synthetic oil bounded primer metal of approved quality including smoothening surfaces by sand papering etc.

PWD.BLDG SCHEDULE_W EF 01.11.2017279-1 (T) - B -12 BUILDING WORKS. (T)MISCELLANEOUS WORKS: B. MAINTENANCE WORKS : 12)Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including cutting, loading, unloading to and from truck or cart by Mathor labour & removing the same to any distance.

PWD.BLDG SCHEDULE_W EF 01.11.201799-1(F) A. 1 (I) BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire chargeof all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m

PWD.BLDGSCHEDULE_W EF 01.11.201710-1(B).3(a) BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLESETC 3. Dismantling R.C. floor, roof, beams etc including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof.

PWD BUILDING WORKS/page no-303/item no-II-I (B)-17 Fitter- mechanic-Helper

PWD BUILDING WORKS/page no-303/item no-II-I (B)-17 Mazdoor

A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 142. 19/10 stranded GI [Hot Dip] wire ...

A N N E X U R E - I Basic Rate of Materials: (All Rates of materials from K-1 to K-14 are excluding VAT) 146. Galv. Eye hook 10"x3/4"

PWD BUILDING WORKS/page no-02/item no-4(B) Earth work in filling in compound,tank,low land,ditches etc.n with fine sand

PWD BUILDING WORKS/page no-14/item no-01 Single brickflat soiling of picked jhama bricks including ramming and dressing bed to proper leveland filling joints with local sand