Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-AOC 1 14 SUJAL MANSION B BLOCK BHANGWADI KALBADEVI ROAD MUMBAI 400 002 | MUMBAI | MAHARASHTRA | 400002 | ₹1.1 Cr | L1 | Accepted-AOC AOC |
| 2 | L2₹1.2 Cr+₹9.2 L (8.35%)Rejected-Finance | ₹1.2 Cr+₹9.2 L (8.35%) | L2 | Rejected-Finance Other Than Being Lowest |
| 3 | L3₹1.3 Cr+₹17.3 L (15.6%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | ₹1.3 Cr+₹17.3 L (15.6%) | L3 | Rejected-Finance Other Than Being Lowest |
| 4 | L4₹1.5 Cr+₹35.9 L (32.5%)Rejected-Finance | ₹1.5 Cr+₹35.9 L (32.5%) | L4 | Rejected-Finance Other Than Being Lowest |
| 5 | L5₹1.5 Cr+₹42.1 L (38.1%)Rejected-Finance BLOCK C 14 GROUND FLOOR PLOT 618 624 BHIVANDIWALA TERRACE JAGANNATH SHANKARSHETH MARG DHOBI TALAO NEAR KALBADEVI POST OFFICE MUMBAI 400002 | MUMBAI | MAHARASHTRA | 400002 | ₹1.5 Cr+₹42.1 L (38.1%) | L5 | Rejected-Finance Other Than Being Lowest |
| Sl No | Description | Qty | Unit | AGRAWAL ASSOCIATES L5 | OM SAI POWER SYSTEMS L2 | Shree Ayyappa Engineering L3 | Chakshu Enterprise L1 | shubham construction L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar with suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set
(b) LED indiction lamps for 3 phases - One set of 3 Nos.
(c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set
INCOMING
(d) ACB 630 Amps 4 pole,50 KA microprocessor based, MDO type - 01 No.
OUTCOMING (e) MCCB 160 Amps 3 pole, 36 KA, thermal magnetic - 01 No.
(f ) MCCB 100 Amps 3 pole, 16 KA, thermal magnetic - 05 Nos.
(g ) MCCB 63 Amps 3 pole, 16 KA, thermal magneti c- 09 Nos. | 1 | Each Job | 3,20,000 ₹3,20,000 | 3,12,500 ₹3,12,500 | 3,30,000 ₹3,30,000 | 2,20,000 ₹2,20,000 Lowest | 4,25,000 ₹4,25,000 |
| 2.00 | Dismantling and taking down Existing LT panel and Supply, install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar with suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1200 Amps for 3 Phases and Neutral - 1Set
(b) LED indiction lamps for 3 phases - One set of 3 Nos.
(c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set
INCOMING
(d) ACB 800 Amps 4 pole,50 KA microprocessor based, MDO type -01 No.
OUTCOMING (e) MCCB 200 Amps 3 pole, 36 KA, thermal magnetic - 01 No.
(f ) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic - 09 Nos.
(g ) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 15 Nos. | 1 | Each Job | 3,70,000 ₹3,70,000 | 3,75,000 ₹3,75,000 | 4,10,000 ₹4,10,000 | 3,00,000 ₹3,00,000 Lowest | 4,25,000 ₹4,25,000 |
| 3.00 | Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar with suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1200 Amps for 3 Phases and Neutral - 1Set
(b) LED indiction lamps for 3 phases - One set of 3 Nos.
(c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set
INCOMING
(d) ACB 800 Amps 4 pole,50 KA microprocessor based, MDO type -01 No.
OUTCOMING
(e) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic - 10 Nos.
(f ) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 13 Nos. | 1 | Each Job | 3,45,000 ₹3,45,000 | 3,61,500 ₹3,61,500 | 4,20,000 ₹4,20,000 | 2,75,000 ₹2,75,000 Lowest | 4,25,000 ₹4,25,000 |
| 4.00 | Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1200 Amps for 3 Phases and Neutral - 1Set
(b) LED indiction lamps for 3 phases - One set of 3 Nos.
(c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set
INCOMING
(d) ACB 800 Amps 4 pole,50 KA microprocessor based, MDO type - 01 No.
OUTCOMING
(e ) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic - 9 Nos.
(f ) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 18 Nos. | 1 | Each Job | 3,75,000 ₹3,75,000 | 3,95,000 ₹3,95,000 | 4,50,000 ₹4,50,000 | 3,10,000 ₹3,10,000 Lowest | 4,30,000 ₹4,30,000 |
| 5.00 | Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1200 Amps for 3 Phases and Neutral - 1Set
(b) LED indiction lamps for 3 phases - One set of 3 Nos.
(c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set
INCOMING
(d) ACB 800 Amps 4 pole,50 KA microprocessor based, MDO type - 01 No.
OUTCOMING
(e ) MCCB 200 Amps 3 pole, 36 KA, thermal magnetic - 2 Nos.
(f) MCCB 100 Amps 3 pole, 16 KA, thermal magnetic - 1 No.
(g) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic - 4 Nos.
(h) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 27 Nos. | 1 | Each Job | 4,50,000 ₹4,50,000 | 3,95,000 ₹3,95,000 | 5,30,000 ₹5,30,000 | 3,70,000 ₹3,70,000 Lowest | 5,00,000 ₹5,00,000 |
| 6.00 | Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set
(b) LED indiction lamps for 3 phases - One set of 3 Nos.
(c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set
INCOMING
(a) ACB 630 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No.
OUTCOMING
(d ) MCCB 200 Amps 3 pole, 36 KA, thermal magnetic - 2 Nos.
(e) MCCB 100 Amps 3 pole, 16 KA, thermal magnetic - 3 Nos.
(f) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 21 Nos. | 1 | Each Job | 3,95,000 ₹3,95,000 | 3,75,000 ₹3,75,000 | 4,70,000 ₹4,70,000 | 3,25,000 ₹3,25,000 Lowest | 4,38,000 ₹4,38,000 |
| 7.00 | Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 2400 Amps for 3 Phases and Neutral - 1Set
(b) LED indiction lamps for 3 phases - One set of 3 Nos.
(c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set
INCOMING
(d) ACB 1600 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No.
OUTCOMING
(e) ACB 630 Amps 3 pole, 36 KA, thermal magnetic release, MDO type - 3 No.
(f) MCCB 400 Amps 3 pole, 36 KA, thermal magnetic -1 No.
(g) MCCB 200 Amps 3 pole, 36 KA, thermal magnetic - 4 No.
(h) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 03 No. | 1 | Each Job | 8,55,000 ₹8,55,000 | 6,81,500 ₹6,81,500 Lowest | 9,50,000 ₹9,50,000 | 7,35,000 ₹7,35,000 | 10,00,000 ₹10,00,000 |
| 8.00 | Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set
(b) LED indiction lamps for 3 phases - One set of 3 Nos.
(c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set
INCOMING
(d) ACB 630 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No.
OUTCOMING
(e) MCCB 400 Amps 3 pole, 36 KA, thermal magnetic - 1 Nos.
(f) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic - 1 No.
(g) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic- 17 Nos. | 1 | Each Job | 3,50,000 ₹3,50,000 | 3,75,000 ₹3,75,000 | 4,10,000 ₹4,10,000 | 2,90,000 ₹2,90,000 Lowest | 4,38,000 ₹4,38,000 |
| 9.00 | Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set
(b) LED indiction lamps for 3 phases - One set of 3 Nos.
(c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set
INCOMING
(d) ACB 630 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No.
OUTCOMING
(e) MCCB 200 Amps 3 pole, 36 KA, thermal magnetic- 4 No.
(f) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic-1 No.
(g) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic- 09 No. | 1 | Each Job | 3,80,000 ₹3,80,000 | 3,45,000 ₹3,45,000 | 3,30,000 ₹3,30,000 | 2,95,000 ₹2,95,000 Lowest | 4,00,000 ₹4,00,000 |
| 10.00 | Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set
(b) LED indiction lamps for 3 phases - One set of 3 Nos.
(c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set
INCOMING
(d) ACB 630 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No.
OUTCOMING
(e) MCCB 100 Amps 3 pole, 36 KA, thermal magnetic- 3 Nos.
(f) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic- 3 Nos.
(g) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic- 3 Nos. | 1 | Each Job | 3,00,000 ₹3,00,000 | 2,25,000 ₹2,25,000 | 3,00,000 ₹3,00,000 | 2,10,000 ₹2,10,000 Lowest | 4,00,000 ₹4,00,000 |
Tender Value
₹1.3 Cr
EMD Value
₹2.1 L
Closing Date
1 Dec 2025, 6:00 pmClosed
CWE (NW) Mumbai
CWE (NW) Mumbai
PROVISION AND INSTALLATION OF 18 SWIVELING HIGH INTENSITY SEARCH LIGHT FOR WATCH TOWERS SEAHWK POSTS AND SPECIAL REPAIR REPLACEMENT OF FANS AGAINST BER AT NAVAL DOCKYARD C NO 64 YAS DEPT OLD HT PILCA CABLE BY XLPE CABLE FROM MRS TO INS VAJRBAHU
2025_MES_738413_1
8492/CWE(NW)Mumbai/E8
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
GE (NW) Kunjali
Class B category b (i)
7 documents required · 7 mandatory
₹1,000
GE (NW) Kunjali
₹2.1 L
27 Jan 2026
4 Nov 2025
3 Dec 2025
4 Nov 2025
1 Dec 2025
26 Nov 2025
4 Nov 2025 - 25 Nov 2025
Amount
Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar with suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (d) ACB 630 Amps 4 pole,50 KA microprocessor based, MDO type - 01 No. OUTCOMING (e) MCCB 160 Amps 3 pole, 36 KA, thermal magnetic - 01 No. (f ) MCCB 100 Amps 3 pole, 16 KA, thermal magnetic - 05 Nos. (g ) MCCB 63 Amps 3 pole, 16 KA, thermal magneti c- 09 Nos.
Dismantling and taking down Existing LT panel and Supply, install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar with suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1200 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (d) ACB 800 Amps 4 pole,50 KA microprocessor based, MDO type -01 No. OUTCOMING (e) MCCB 200 Amps 3 pole, 36 KA, thermal magnetic - 01 No. (f ) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic - 09 Nos. (g ) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 15 Nos.
Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar with suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1200 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (d) ACB 800 Amps 4 pole,50 KA microprocessor based, MDO type -01 No. OUTCOMING (e) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic - 10 Nos. (f ) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 13 Nos.
Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1200 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (d) ACB 800 Amps 4 pole,50 KA microprocessor based, MDO type - 01 No. OUTCOMING (e ) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic - 9 Nos. (f ) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 18 Nos.
Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1200 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (d) ACB 800 Amps 4 pole,50 KA microprocessor based, MDO type - 01 No. OUTCOMING (e ) MCCB 200 Amps 3 pole, 36 KA, thermal magnetic - 2 Nos. (f) MCCB 100 Amps 3 pole, 16 KA, thermal magnetic - 1 No. (g) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic - 4 Nos. (h) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 27 Nos.
Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (a) ACB 630 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No. OUTCOMING (d ) MCCB 200 Amps 3 pole, 36 KA, thermal magnetic - 2 Nos. (e) MCCB 100 Amps 3 pole, 16 KA, thermal magnetic - 3 Nos. (f) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 21 Nos.
Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 2400 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (d) ACB 1600 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No. OUTCOMING (e) ACB 630 Amps 3 pole, 36 KA, thermal magnetic release, MDO type - 3 No. (f) MCCB 400 Amps 3 pole, 36 KA, thermal magnetic -1 No. (g) MCCB 200 Amps 3 pole, 36 KA, thermal magnetic - 4 No. (h) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic - 03 No.
Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (d) ACB 630 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No. OUTCOMING (e) MCCB 400 Amps 3 pole, 36 KA, thermal magnetic - 1 Nos. (f) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic - 1 No. (g) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic- 17 Nos.
Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (d) ACB 630 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No. OUTCOMING (e) MCCB 200 Amps 3 pole, 36 KA, thermal magnetic- 4 No. (f) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic-1 No. (g) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic- 09 No.
Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (d) ACB 630 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No. OUTCOMING (e) MCCB 100 Amps 3 pole, 36 KA, thermal magnetic- 3 Nos. (f) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic- 3 Nos. (g) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic- 3 Nos.
Dismantling and taking down Existing LT panel and Supply,install, commission and testing cubical type LT panel board of indoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made out of 2.00 mm thick CRCA sheet, front & back openable doors having vertical thick duly finished internall and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete capacity of Copper bus bar suitable current rating and suitable size of PVC insulated copper conductor, thimbles glands for internal control wiring complete all as specified and directed with the following accessories :- (a) Copper bus bar of capacity 1000 Amps for 3 Phases and Neutral - 1Set (b) LED indiction lamps for 3 phases - One set of 3 Nos. (c ) Digital multi function meter class 0.5 (96x96) Sqmm with suitable CTs - 01 Set INCOMING (d) ACB 630 Amps 4 pole,50 KA, microprocessor release, MDO type - 01 No. OUTCOMING (e) MCCB 100 Amps 3 pole, 36 KA, thermal magnetic- 2 Nos. (f) MCCB 63 Amps 3 pole, 16 KA, thermal magnetic- 6 Nos. (g) MCCB 40 Amps 3 pole, 16 KA, thermal magnetic- 6 Nos.
Supply and fix in repair sheet metal enclosure, vertical type VTPN 12 Way, 415 V, with 250 A copper busbar, double door type, IP-54, IK-09 protection, suitable arrangement for incomer MCCB 100 Amp 4 pole, including required number of suitable size glands and suitable arrangement for housing MCBs, complete all as specified and directed by Engineer-in-Charge. Note: Distribution Boards shall be concealed in wall wherever possible including making good the surface to match with the surrounding.
Supply and fix MCCB, four pole, 160 Amps, 36 KA, thermal magnetic type, 415 Volts, complete all as specified and directed.
Supply and fix MCB SPN 40–63 Amps, 10 KA, ‘C’ curve, complete all as specified and directed.
Supply and fix MCB SP 6–32 Amps, 10 KA, ‘C’ curve, complete all as specified and directed.
Supply and fix MCB TP 63 Amps, 10 KA, ‘C’ curve, complete all as specified and directed.
Supply and lay in repair XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty), 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3½ core, complete all as specified and directed by Engineer-in-Charge.
Supply and lay in repair XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty), 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3½ core, complete all as specified and directed by Engineer-in-Charge.
Supply and lay in repair XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty), 1100 Volts grade with stranded aluminium conductor of size 185 sqmm 3½ core, complete all as specified and directed by Engineer-in-Charge.
Supply and fix GI perforated cable tray, 2 mm thick, size 250 mm x 50 mm, including prefabricated GI clamps suitable for fixing/supporting cable trucking on any wall (brick/stone) vertically or horizontally, including all accessories, bending, shaping, drilling, welding, cutting and all fixing arrangements, complete all as directed.
Supply and fix GI perforated cable tray, 2 mm thick, size 450 mm x 50 mm, including prefabricated GI clamps suitable for fixing/supporting cable trucking on any wall (brick/stone) vertically or horizontally, including all accessories, bending, shaping, drilling, welding, cutting and all fixing arrangements, complete all as directed.
M & L for earthing in Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 32 mm dia with 250 micron ( average ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. The compound shall be supplied in 50 Pound Bag. ( 1 Bag required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set incl Supply of Eco Friendly weather proof High Density Polyethylene Earth Pit Chamber Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.
Material and labour for 25 x 4 mm GI earth continuity conductor or main earthing lead, fixed to wall, buried in ground, drawn in conduit/pipe or fixed to transformer/panel body, complete all as specified.
Supply, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured HT electric power cable (heavy duty) with stranded aluminium conductor, 11000 Volts grade, size 3 core 185 sqmm, complete all as specified and directed. Note: Damage to existing services (HT/LT cables, water pipelines, sewage lines, roads, footpaths, etc.) during execution shall be made good at contractor’s cost and deemed included in quoted rates.
Excavation in trenches, for foundation of poles, stays or for laying of cables, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out as in soft / loose soil complete all as specified & directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil completer all as specified and directed.
Removing excavated material(soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engineer-in-charge.
M & L of Supplying and laying reinforced precast concrete cable cover, class EHV, type 1 with peak, size 300mm x 180mm x 40 mm over burnt bricks laid dry and flat across the axis of cable, abutting each other with gaps between adjacent bricks not exceeding 10mm complete all as specified and as directed by Engineer-in-charge.
M&L for sand cushioning to underground cable in trenches with clean dry river sand for protection of cable complete all as specified and directed.
Supply and fix straight through cable jointing kit, 11 KV grade, cold shrink type, complete with jointing material and accessories, suitable for 3 core XLPE, armoured, aluminium conductor cable of size 120–185 sqmm, indoor/outdoor type, complete all as specified and directed by Engineer-in-Charge.
Supply and fix indoor termination cable jointing kit, 11 KV grade, heat shrink type, complete with jointing material and accessories, suitable for 3 core XLPE, armoured, aluminium conductor cable of size 120–185 sqmm, complete all as specified and directed by Engineer-in-Charge.
Material and labour for boring holes under road, pavement, hard standing etc. by trenchless technology using ultrasonic technique and necessary machinery at a depth not less than 1.5 m, including providing and laying HDPE pipe 100 mm dia, suitable for 0.4 MPa working pressure, complete all as specified and directed.
M&L galvanised pipe including fittings, light grade fixed to poles, on walls laid under road in trenches for protection of underground cable all as specified of 100mm dia complete all as specified and as directed by Engineer-in-charge.
Supply and Fix LED swiveling search light of 300 watt with motorized revolving mechanism, auto control features, dust and vermin proof, input 220 volts AC, 50 Hz, single phase, spot beam range upto 300 mtrs, horizontal rotation of 360 degrees, vertical rotation of 180 degrees, not less than 40000 lumens, 5000K colour temperature, IP-65 protection, operating temperature maximum 60 degree celsius including all necessary control modules and mounting accessories including fixing on poles/structures, alignment as per manufacturer's guidellines and site requirement complete all as specified and directed b Engineer_in_charge. Note: Any frame work including angle iron, metal frames, nut & bolts, tools, PCC, grouting on surface/wall/any location/height required for installation of search lights will be deemed to be included in the quoted rate complete all as specified and as directed by Engineer-in-charge.
Supply, lay and test XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty), 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core, on wall/trenches including necessary clamping, complete all as specified and directed by Engineer-in-Charge.
Supply and fix cable junction box, size 155x210x92mm with integrated membranes and metric knockouts for cable applications with terminals complete all as specified and directed by Engr-in-Charge. Make: Hensel Cat part No. DK1600G or technocommercial equivalent.
Supply and fix in replacement of MCB SP 6 to 32 Amps capacity, C curve type, suitable for Job 240 volts AC supply, with over laod and short circuit protection, rupturing capacity not less than 10 KA including making necessary connection complete all as specified and directed by Engr-in-Charge.
Dismantling and taking down existing unserviceable ceiling fans, exhaust fans, wall fans & pedestal fans of any size at site, including disconnecting cable ends and transporting to MES BSO Store Yard at Kunjali, complete all as specified and directed by Engineer-in-Charge.
Supply and fix ceiling rose surface bakelite three terminal of size 60x 50mm, 240 volts AC complete all as specified and as directed by Engineer-in-charge.
Supply and fix ceiling fan, AC, 50 Hz, single phase, 230 V, 1200 mm sweep, minimum air delivery 210 CMM, minimum service value 4 CMM/W, maximum power input 50 W, 3 Nos. metallic blades with corrosion resistant paint, Class I, double insulated, insulation Class A, BLDC motor, ISI marked, power factor >0.9, BEE 5-star rated, including accessories and 3-core flexible cable connection, complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing Exhaust fan metal body, 380 mm Turbo Force, 230 volt, 50 Hz AC, 1400 rpm, supply single phase including accessories and connection with flexible wire three core for phase, neutral & earth complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Exhaust fan metal body, 450 mm Turbo Force, 230 volt, 50 Hz AC, 1400 rpm, supply single phase including accessories and connection with flexible wire three core for phase, neutral & earth complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing wall mounted fan plastic body, 450 mm sweep, 230 volt, 50 Hz AC, supply single phase PVC body including accessories and connection with flexible wire three core for phase, neutral & earth complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Pedestal fan Turbo Force Pedestal Grey 600 mm sweep mettalic body rated, 230 volt, 50 Hz AC, 1440 rpm, supply single phase PVC body including accessories ard connection with flexible wire three core for phase, neutral & earth complete all as specified and as directed by Engineer-in-charge
OM SAI POWER SYSTEMS (BID ID -3486753)
Shree Ayyappa Engineering (BID ID -3487003)
shubham construction (BID ID -3492202)
AGRAWAL ASSOCIATES (BID ID -3485811)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
BOQ_826811.xls
BOQ • 6.46 MB
8492.rar
Tender Documents • 3.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .