Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.3 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | Rejected-Technical | - | Rejected-Technical Not Approved |
Tender Value
₹35.2 L
EMD Value
₹70,380
Closing Date
1 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF JODHPUR
HQ CWE AF JODHPUR
85932 E8 PROVN OF SEWAGE CONNECTION FROM AF STN MOUNT ABU TO MUNICIPAL CORPORATION CENTRAL SEWAGE SYSTEM AND ALLIED WORKS SERVICES AT AF STN MOUNT ABU
2022_MES_527751_2
85932/E8
Open Tender
Civil Works
Item Rate
365 days
AGE I AF MOUNT ABU
AS PER NIT
7 documents required · 7 mandatory
₹500
AGE I AF MOUNT ABU
₹70,380
Yes
30 Aug 2022
12 Jul 2022
3 Aug 2022
12 Jul 2022
1 Aug 2022
19 Jul 2022
12 Jul 2022 - 13 Jul 2022
Amount
Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in Hard Rocks complete all as specified and as directed by Engineer-in-Charge. Note : Since Mount Abu is an eco-sensitive zone and no construction materials are allowed to be thrown out as the gate here. If hard rock is found during excavation, same is to be stacked properly and measured, it would be government property. If any quantity out of same is required to be used in the project, then it would be paid by the contractor to the department as per SSR 2020 Part-II rates.
All as per Item No 1.00 above but depth exc 1.5 mtr and not exc 3.00 mtr as in Hard Rocks complete all as specified and as directed by Engineer-in-Charge. Note : Since Mount Abu is an eco-sensitive zone and no construction materials are allowed to be thrown out as the gate here. If hard rock is found during excavation, same is to be stacked properly and measured, it would be government property. If any quantity out of same is required to be used in the project, then it would be paid by the contractor to the department as per SSR 2020 Part-II rates.
All as per Item No 1.00 above but depth exc 3.0 mtr and not exc 4.5 mtr as in Hard Rocks complete all as specified and as directed by Engineer-in-Charge. Note : Since Mount Abu is an eco-sensitive zone and no construction materials are allowed to be thrown out as the gate here. If hard rock is found during excavation, same is to be stacked properly and measured, it would be government property. If any quantity out of same is required to be used in the project, then it would be paid by the contractor to the department as per SSR 2020 Part-II rates.
Excavation over areas n exc 1.5 mtr in deep and getting out as in Hard Rocks complete all as specified and as directed by Engineer-in-Charge. Note : Since Mount Abu is an eco-sensitive zone and no construction materials are allowed to be thrown out as the gate here. If hard rock is found during excavation, same is to be stacked properly and measured, it would be government property. If any quantity out of same is required to be used in the project, then it would be paid by the contractor to the department as per SSR 2020 Part-II rates.
All ar per Item No 4 above but depth exc 1.5 mtr and not exc 3.0 mtr as in Hard Rocks complete all as specified and as directed by Engineer-in-Charge. Note : Since Mount Abu is an eco-sensitive zone and no construction materials are allowed to be thrown out as the gate here. If hard rock is found during excavation, same is to be stacked properly and measured, it would be government property. If any quantity out of same is required to be used in the project, then it would be paid by the contractor to the department as per SSR 2020 Part-II rates.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm in Hard Rock complete all as specified and as directed by Engineer-in-Charge.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.
Rolling and consolidating formation surfaces by power roller exc 8 tonne & n exc 12 tonne complete all as specified and as directed by Engineer-in-Charge.
M&L for 200mm thick approved Granular Sub Base (GSB) light wearing surfaces type 1 filling, (compacted thickness 200 mm) for newly construction of pavement in layers not exceeding 10 cm thick, including spreading, levelling, watering and compacted rolling with 8 to 10 ton power roller with required to gradient and camber as per all as specified.
M&L for 150 mm thick (compacted thickness) W.B.M. in two layers 75 mm each ,with coarse aggregate of granite, trap or basalt grading 2 , (63 to 40 mm size) , spread, rolled and consolidated to required gradient ,camber and super elevation required limestone,sand stone, flint or quartzite complete all as specified and as directed by Engineer-in-Charge.
M&L for preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the clean surface with gunny bags to remove all loose dirt etc apply evenly a priming/tack coat paving bitumen with primer @ 10 Kg/10sqm with paving bitumen complete all as specified and as directed by Engineer-in-Charge.
M&L for laying bituminous premix asphaltic dense concrete 40mm consolidated thickness with 5.4 % binder content by weight by total mix, rolled and compacted to required camber and gradient complete all as specified and as directed by Engineer-in-Charge. Note:- If bitumen contents after approved design Mix is greater than 5.4%,then contractor will execute the work without price adjustment and if bitumen contents after approved design Mix is less than 5.4%,then recovery would be made accordingly.
M&L for cement concrete type C2 1:3:6 (40 mm graded stone agg) as in foundation filling & mass concrete all as specified and directed.
M&L brick work with Sub class B brick exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with using extra cement all specified and directed.
M&L for plain cement concrete 1:2:4 type B0 (12.5mm graded stone aggregate) as in copings complete all as specified and as directed by Engineer-in-Charge.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and as directed by Engineer-in-Charge.
M&L for reinforced concrete pipes class NP-3 and of dia 300 mm laid and jointed complete with collars complete all as specified and as directed by Engineer-in-Charge.
M&L for reinforced concrete pipes class NP-3 and of dia 250mm laid and jointed complete with collars complete all as specified and as directed by Engineer-in-Charge.
M&L Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 250 mm bore complete all as specified and as directed by Engineer-in-Charge.
M&L Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 300 mm bore complete all as specified and as directed by Engineer-in-Charge.
M&L for reinforced cement concrete of M-25(Design Mix) 20 mm graded aggregate as in footings,foundation beams and plinth beams complete all as specified and as directed by Engineer-in-Charge.
All as per Item No 22.00 above but as in walls complete all as specified and as directed by Engineer-in-Charge.
All as per Item No 22.00 above but as in roof beams complete all as specified and as directed by Engineer-in-Charge.
All as per Item No 22.00 above but as in slabs supported on walls complete all as specified and as directed by Engineer-in-Charge.
M&L for Mild steel TMT bars of 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
M&L for formwork to sides of concrete foundations,footings and plinth beams for flat rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
M&L for formwork to soffits of suspended slabs such as roof slabs for flat rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
M&L for formwork to sides of soffits of floor or roof beams,cantilevers,lintels etc for flat rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
M&L for formwork to faces of walls,retaining walls,abutment,parapets and stair case railings and similar work in rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
S&F SFRC manhole cover size 600 mm x 600 mm dia x 70 mm thick with frame set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.
S&F SFRC manhole cover size 450mmx450mm x 40mm thick with cover set in CM 1:4 for gully trap with frame set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .