Repairing and Rising of road, drain in 6 Percent abadi plot in village Shakipur, Greater Noida.

Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks marginal banks and guide banks or filling up ground depression, lead upto 50M as per MORTH. All kinds of soil. (SOR-20/4.03)

Carriage of earth/material by mechanical transport including loading, unloading and stacking.Earth (i)Lead upto 1.00 km (SOR-20/4.08/261(B))

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth dressing to camber and consolidating with road roller including making good the undulations etc.and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres. (DSR-18/16.1/AR)

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. (DSR-18/11.2/AR)

Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in proportion of 8:4:1 including supply of all material, labour, tools & plant etc, required for proper completion of the work. (UPPWD/SOR-20/5.08/281)

Case-II PCC Grade M-25 using batching plant transit mixer & manual placing. (MORTH-20/15.11/D/P-655)

Providing and fixing in position 12 mm thick bitumen impregnated fibre board conforming to IS: 1838, including cost of primer, sealing compound in expansion joints. (DSR-13/5.28/AR)

Earth work in excavation in ordinary soil in all of foundations trenches including dressing of the side and ramming of bottom ,lifts up to 1.5 m including getting out the excvated soil and disposal of surplus excavated soil as directed within a lift of 500 mts0.0 to 1.50 m. (SOR-20/4.01)

carriage ofcarriage of earthmaterial by mechanical transport including loading, unloading and stacking 1.0 km lead. (SOR-20/4.08/261(B))

Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in proportion of 8:4:1 including supply of all material, labour, tools & plant etc, required for proper completion of the work. (UPPWD/SOR-20/5.08/281)

M-150 brick work in 1:4 (1 cement : 4 coarse sand) of 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of work. (SOR-20/6.04/305 (A)).

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (DSR-18/13.4.2/AR)

Cement concrete with 2 cm. gauge approved stone bllast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tool & plant etc, required for proper completion of work. (SOR-20/5.07/279(a))

Case-II RCC Grade M-25 using batching plant transit mixer & manual placing. (MORTH-20/15.11/E/P-657)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. up to plinth level Thermo-Mechanically Treated bars./cold twisted bars. ( Sail Steel)

Labour Cess will be paid extra as per applicable

GST will be paid extra as per applicable

Please Enable Macros to View BoQ information