REPAIR TO JOINERY FLOORING AND OTHER MISC WORKS IN DOMESTIC AND TECH AREA AT AF STATION OJHAR

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each compete all as specified as directed by Engineer -in -charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc. 4 Sqm each compete all as specified as directed by Engineer -in -charge .

Taking down shutters of any description exc1 Sqm but n exc 2 Sqm each compete all as specified as directed by Engineer -in -charge

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.Make;-Rajashri/Sindex/Accura (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S & F Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.(Make-Rajashri/Sintex/ Accura) or equivelant as approved by GE.

S&F Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge (Make-Rajashri/Sintex/ Accura)

Taking down existing steel window shutter by cutting existing hinges etc , making in proper allignment of the steel shutter by straightening for refixing on the existing frame including all welding by providing box type MS hinges 2 nos in each leaf, providing 2 nos 100mm size aluminium tower bolt and 01 no 100mm aluminium handle with each leaf including welding MS sheet of 2mm thick to existing window shutter of size of equal to tower bolt and handle including making holes for screwing the tower bolt/handle. Note : straightenining/ allignening existing MS shutter shall be refixed including all welding, cutting, grinding etc to existing window steel frames. steel wire cloth and grazing if replace shall be paid under separate item mentiobed here in after. the above work shall be exucated for any size of window , in blocks upto 4 stories and in the MD qtrs/OTM in Domestic and Technical area in different location as per site requirement.

S & F for 35mm thick factory made Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats (Shutters shall be brought at site without primer and got approved by Engr-in-Charge/ GE.)

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides (ISI Mark as approved)

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive gauze, glass etc., (with sash bars) divied into into sqare and half portion panel upto middle rail and will be provided with 12mm thick pre laminated board laminated on both side and edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizess of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a)compete all as specified as directed by Engineer -in -charge

S & F 100 mm MS butt hinges medium weight cold rolled mild steel compete all as specified as directed by Engineer -in -charge

S & F 100 mm Heavy duty Aluminium powder coated butt hinges as approved as per sample compete all as specified as directed by Engineer -in -charge

S & F 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked compete all as specified as directed by Engineer -in -charge

S & F 150 mm Aluminium powder coated tower bolt as approved as per sample compete all as specified as directed by Engineer -in -charge

S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised, ISI marked compete all as specified as directed by Engineer -in -charge

S & F 150 mm Aluminium powder coated Handle as approved as per sample compete all as specified as directed by Engineer -in -charge

S & F 300 mm long and Mild steel Chromium plated sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed compete all as specified as directed by Engineer -in -charge

M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces.compete all as specified as directed by Engineer -in -charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F framed work such as grills of approved design using square bar for making frame, MS hollow square tubes in grills , framed guard bars of any section/ design as approved with end of bar shouldered and/ or reveted or forged in spikes and in similare works including all welding and providing holdfast etc., and similar work conforming to Fe-290 Grade E 165 compete all as specified as directed by Engineer -in -charge

Taking down cement plaster on brick or stone wall any description including raking out joints, hacking for key, scrubbing down with water etc.compete all as specified as directed by Engineer -in -charge ,

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces including in patches as in jambs/ sofits etc finished even and smooth without using extra cement complete all as specified and as directed by Engineer-In-Charge

M & L for preparing plastered surfaces of walls and applying three coats of white wash compete all as specified as directed by Engineer -in -charge

M & L for preparing newly plastered surface of walls and applying two coats of distemper or oil emulsion paint over a coat of alkaly resistance primer compete all as specified as directed by Engineer -in -charge

M & L for preparing surfaces of old surface of walls and applying two coats of distemper or oil emulsion paint over a coat of alkaly resistance primer compete all as specified as directed by Engineer -in -charge

Hacking out old broken glass (any type/thickness) from wooden or steel frames, glazed with oil putty or fixed with wooden or aluminum beading compete all as specified as directed by Engineer -in -charge

S & F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane for steel/ aluminium windows compete all as specified as directed by Engineer -in -charge

S & F for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 Sqm in each pane for steel/ aluminium windows compete all as specified as directed by Engineer -in -charge

S & F for 3 mm thick figured glass, pin headed type ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane compete all as specified as directed by Engineer -in -charge

S & F in repair 18mm thick prelaminated particle board exterior grade medium density, both side with decorative choice lamination as in panels of partitions/ cup board shelves including providing wooden brackets for support of laminated boards and the like fixed in wooden frame with wooden beading compete all as specified as directed by Engineer -in -charge

S & F mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified as directed by Engineer -in -charge ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building)

M&L welding in repairs exc. 2.5cm but n exc. 5cm in length thickness of metal to be welded exc 6mm but n exc 9mm compete all as specified as directed by Engineer -in -charge ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building)

S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed to steel window and ventilator compete all as specified as directed by Engineer -in -charge . ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building) the rates includes providing of MS beads of standard section fixed with SS screws)

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti.compete all as specified as directed by Engineer -in -charge

S & F in repairs aluminium wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with rubber beads/gaskets for aluminium window as in item No 40 here in after all as specified as directed by Engineer -in -charge ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building)

Repairs to aluminium door shutter of any description and size including taking down from frames for realignment and tightening including adjusting the shutter removal and refixing hydraulic or floor door spring , and hinge , refixing shutter in same opening with all necessary repairs /refixing ,including replacement of damaged jointing cleats ,glazing clips , rubber packing ,aluminium beading , screws etc also including provision of 6 mm dia through bolt with nut on both side for top and bottom rail. complete all as specified and as directed by Engineer-in-charge. ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building) Hydrolic door closer/ door spring shall be paid under separete items

Supply only Aluminium extruded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between61 to 80 kg and fixed Make:-Universal/Sigma/Everite

Supply only Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed Make:-Universal/Sigma/Everite

All as per item no-37 above But Aluminium windows of any type/ mechanicium except of Hydraulic / floor door spring. Wire mesh/ glass shall be paid under separate item above the rates includes replacement of rollers/ sliding arrangement/locking arrengments/ any types of hinges .if during repalcement of wiremesh/ glass window requires dismanteling of complete window with frames and shutters the same shall be carried out and the rates are deemed to included such provisions under this item and nothing shall be paid extra.

Dismantling of Existing Aluminium door/window upto 4 sqm each compete all as specified as directed by Engineer -in -charge

S & F in repairs curtain rod of metalic 25 mm dia with MS chromium plated of minium 16 gauge including long projected bracket of heavy section both side fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed by Engineer -in -charge

M & L for powder coated aluminium sliding window with anodized aluminium frame of 3 Track of size 92mmx32mmx 1.5mm thick, with sliding shutters(02 glass and 01 Wirecloth) with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick) including glazing with tinted sheet glass panel 4.00mm thick and Aluminum alloy wirecloth 0.45 mm nominal dia and avg width of aperture 1.4 mm, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified as directed by Engineer -in -charge

M & L for providing Aluminiium shutter with Powder coated Chowkat of size 88.9mmx47.63mmx1.60 mm thick fixed with heavy duty aluminium hinge of size 125mm 3 nos with each leaf with top rail,middle rail and bottom rail and style of size 85 mm x 44.5 mm x 1.50 mm thick with 200 mm size powder coated handle 2 nos with each leaf , powder coated aluminium tower bolt 150mm long 2 Nos per leaf including 12 mm thick both side prelaminated particle board / 5.5 mm thick glass pane in the both panel with necessary joining cleats, rubber packing, aluminium beading, screws etc complete all as specified and as directed by Engineer-In-Charge. (Note -1 All fitting shall be of same finished as of door shutter and shutter may be single/ double leaf if the shutteris more than 1.10mtr shutter shall be of double leaf, the hollow section of vertical style where the hinges are to be provided the complete vertical style shall be provided with soft wood and minimum 65mm long screw provided for foxing of hinges 2 .If any aluminium section mentioned in CA not available in market then the immidiate higher section shall be provided by the Contractor without any price adjustment )

S&F mild steel four levers mortice lock vertical type size 100mm

S&F 150mm long Heavy duty stainless steel fancy type sliding bolt of 12mm dia or rectrangular section as approved.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises if backing is dismanteles shall be made good by the contractor before bedding layer is laid.

M & L for Glazed ceramic tiles in vertical surface 375x 250x 7 mm/ 450X 300X 7mm thick laid/bedded over 10mm thick cement plaster with cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed by engr in charge (including in Jambs of window & in pathces)

S/F in repairs 12 mm thick toughned glass making provision of hole for all ss glass fittings and fixing including SS patch fittings and hinges including providing and fixing of SS top and bottom rail of minimum 100mm width on single and double leaf in door all as specified and directed by Engr in Charge

Supply and fixing in repair 18" long SS Handle heavy duty for door all as specified and directed by Engineer in Charge

Supply fix in repair SS lock for toughned glass but for single and double leaf shutter with tripple key etc completed of make Godrej/link/Royal etc completed and as directed.

S&F aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazing cleat and revolving arrangement of standard section of aluminium including rubber packing, aluminium beading or gasket for for aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixing of Aluminium wire cloth 0.45mm nominal dia and average width of apperture 1.40mm etc all as specified and directed by Engineer in Charge.

Taking down existing window shutteer leaf of size upto 0.75 sqm each by cutting hinges including making good the surface of removed hinges by grinding.

Cutting holes in but in brick walls built in cement mortar and stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exceeding half brick but not exceed one brick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall)

M&L for Granite (of any colour or any grains as approved) work with 16 to 18mm thick table rubbed and polished as in steps jambs , pillers , window cills, cooking platform and similar works including pointing in whice cement using 1:2 using marvel dust and admixture of pigments to match with the shede of grinate over and including 15mm thick screed bad in CM 1:6 for laying grinate all as specified and directed including taking down / dismanteling of existing plaster/ stone of any type. Note : Grinate shall be best quality and shall be provided one piece and width minimum 70mm in jambs except of cooking platform whicl shall be of full width as per site including full moulding of exposed edges with polishing. The back surface of grinate shll be made rough by sprinkeling small pebbles using adehesive for bonding with bedding layer.

Servicing of rolling shutter greasing/oiling serviceing for smoothy functioning for all parts including ball bearing, Spring, gear assembly,welding while required etc, rolling shutter push pull or manual type, size n exc 10 sqm complete all as specified and directed.

Servicing of rolling shutter greasing/oiling serviceing for smoothy functioning for all parts including ball bearing, Spring, gear assembly,welding while required etc, size exceeding 10 sqm but not exc 20 Sqm complete all as specified.

Easing, adjusting, greasing of base wheel & top grid wheel and repairs to steel door , each shutter leaf n exc12 Sqm, including minor repairs, welding, change of damaged base wheel, guide wheel, nut bolt, bearing balls etc to sliding door leaf for noiceless smooth operation complete all as directed.

Easing, adjusting, greasing of base wheel & top grid wheel and repairs to collapseable shutter, each shutter leaf n exc 6 Sqm, including minor repairs, weilding, change of damaged guide channel, handle, members etc to sliding door leaf of hanger for noiceless smooth operation complete all as directed.

S&F in repair MS Spring suitable for rolling shutter upto 10 Sqm

S&F in repair MS Spring suitable for rolling shutter size exceeding 10 sqm but not exc 20 Sqm

S&F in repair MS ball beraing for rolling shutter.

S&F in repair lathe of thickness 1.25mm thick for rolling shtters

S&F in repair shaft for rolling shtters

S&F in repair gear assembly suitable for rolling shutters of any size fixed in position all as specified.

S&F in repair mild steel section of any size and section including necessary cutting & drilling holes for rolling shutter and collapseable shutter as required.

S&F in repair mild steel solid rollers of any dia or section complete all as specified

M&L MS work as in pintel hooks, brackets etc incl necessary sutting welding, drilling holes confirming to Fe-290 complete all as specified.

S&F in Repair 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, but gear operated type with bevel gear box and crank handle complete all as specified and directed.

Supply only Safety lever locks mild steel with 4 levers for rolling shutters

M&L for Preparation of new or previously untreated surfaces of steel or iron surfaces exceeding 10cm width or girth and applying two coats of aluminium paint over one coat of red oxide primer.Complete all as specified and as directed by Engineer-In-Charge Note ; 1.The Works will carried out scattered area in Domestic and technical area as per site requirement in SMQs/OTMs in different locations upto 4 storey bldgs.The Contract is based on day to day complaints for replacement of wooden doors/windows / ventilators etc as above . The details of the doors and windows shall be given to the contractor as recived in complints by the user . The contractor will reecce for the details given to him and intimate the Engr-in-Charge for replacement of the same by sending his rep and submit the same details of the joineries required at site. the contractor will not claim any extra for reecce. Total joinery replacements are based on the Day to day complaints and Contrctors will adhere to the time schedule given to him and promised to the user for repalcement of joineries.2.All the demolised/dismantled material for which the credit has not been catered shall be removed by the Contractor out side MOD land without any extra cost.

M/s M R MAHANA

SHREE SAMARTH SERVICES

M/s Lakhanpal construction company