UPGRADATION MODIFICATION OF SEALING AND PACKING ROOMS OF FEPT DIVISION AT DIBT MYSORE UNDER GE I R AND D EAST BANGALORE

Amount

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.

Material and labour for 15 mm thick cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand), finishing complete all as specified and as directed.

Material and labour for 15 mm thick cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand), finishing complete all as specified and directed.

Material and labour for 6 mm thick cement plaster mix 1:3 (1 cement: 3 fine sand) finishing the ceiling surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for finishing walls with Acrylic Smooth exterior paint of required shade : new work (two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90/10 sqm complete all as specified and as directed.

Material and labour for Distempering with 1st quality Acrylic distemper or Oil bound Distemper for walls (Ready mix) having VOC content less than 50 grams/ litre of approved brand, shade and manufacture to give an even shade : new work (two or more coats) including applying priming coat with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre complete all as specified and as directed.

Material and labour for Distempering with 1st quality Acrylic distemper or Oil bound Distemper for on ceiling surface (Ready mix) having VOC content less than 50 grams/ litre of approved brand, shade and manufacture to give an even shade :New work (two or more coats) including applying priming coat with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre complete all as specified and as directed.

Material and labour for complete removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and as directed.

Providing and applying wall putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

Material and labour for Distempering with 1st quality two coats acrylic Oil bound distember on old Work surfaces (Old prepared wall surface) (Ready mix) having VOC content less than 50 grams/ litre of approved brand, shade and manufacture including applying additional coats wherever required to achieve even shade and colour to give an even shade and colour complete all as specified and as directed.

Material and labour for Distempering with 1st quality two coats acrylic Oil bound distember on old Work surfaces (Old prepared Ceiling surface) (Ready mix) having VOC content less than 50 grams/ litre of approved brand, shade and manufacture including applying additional coats wherever required to achieve even shade and colour to give an even shade and colour complete all as specified and as directed.

Removing dry or oil bound distemper /Exterior paint/Cement base paint, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc.and Finishing walls with Acrylic Smooth exterior paint of required shade on old work (Old surface) (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including applying priming coat with primer of approved brand, shade and manufacture, having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre complete all as specified and as directed.

Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Providing and fixing up to floor five level precast cement concrete solid block, 1:11⁄2:3 (1 Cement: 11⁄2 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete all as specified and directed.

Demolishing cement concrete any description manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Providing and laying in position specified grade of reinforced cement concrete, 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources) excluding the cost of centering, shuttering, finishing and reinforcement complete all as specified and as directed.

Supply and fixing for Heavy duty FRP drain cover of size 300 x600 mm with frame and opening handle complete all as specified and directed.

Material and labour for PCGI, skin thickness: 0.8 mm thick, Infill : Paper craft Honey comb with flush double glazing glass, hardware like door closure, Door handles, ball bearing butt hinges and provision for concealed automatic door bottom seal, Size: 1000 x 2100 mm (Single door) complete all as specified and directed. MAKE : E LITE FIRE DOORS / MICROFLOW DEVICES

Dismantling tiles work in floors/wall tiles or Mosaic tiles for the thickness of tiles 10mm to 25mm including cement mortar and stacking material within 50 metres lead complete all as specified and as directed.

Material and labour 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in bedding, finished fair and even complete all as specified and directed

Providing and laying double charge vitrified tile matt finished coloured of size 1000x1000 mm and thickness not less than 10 mm as in floors in different size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on and including 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and as directed.

Material and labour for vitrified ceramic, Matt finish coloured wall tiles of size 1200mm x 600mm x 8 to 10 mm thick on vertical surfaces; set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tile over and including 10 mm thick cement plaster in cement mortar 1:4 complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts, guard bars etc, of area 3 sq. metres and below complete and stacking within 50 metres lead complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) aluminium frame work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. NOTE :- Glazing, paneling and dash fasteners to be paid for separately.

Providing and fixing for shutters of doors, windows & ventilators Powder coated aluminium (minimum thickness of powder coating 50 micron) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required complete all as specified and directed. NOTE :-Fittings shall be paid for separately.

Providing and fixing float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. NOTE :- Cost of aluminium snap beading shall be paid in basic item.

Providing and fixing 12 mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P . brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. Fixed to openings including priming coat with approved steel primer complete all as specified and as directed.

material and albour for painting with synthetic enamel paint to new steel surfaces and two or more coats on new work of approved brand, shade and manufacture to give an even shade complete all as specified and as directed.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete all as specified and as directed.

Providing and fixing aluminium hanging floor door Twin rubber stopper , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and as directed.

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc.complete.

Providing and fixing Rectangular shape 453 x 357 mm Looking mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing complete all as specified and as directed.

Providing and fixing PTMT towel rail 600 mm long with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete all as specified and as directed.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing White Vitreous China Flat back wash basin size 630 x 450 mm with a pair of 15mm C.P. brass pillar tap, C.I. brackets, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and as directed.

Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete all as specified and as directed.

Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe 45 cm length with brass unions complete all as specified and directed.

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete all as specified and as directed.

Dismantling 15 to 40 mm dia G.I. pipe internal connection inlet and outlet connections including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer- in-Charge.

Providing and fixing for 20 mm nominal dia, Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including Concealed work, including cutting chases and making good the walls etc.complete as per direction of Engineer in Charge.

Providing and fixing for 20 mm nominal dia, Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling for External work & testing of joints complete as per direction of Engineer in Charge.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing for 20 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete all as specified and as directed.

Providing and fixing for 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and as directed.

Material and labour for Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and as directed.

Material and albour for Steel reinforcement TMT bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level all as specified and as directed.

Centering and shuttering including strutting, propping etc. and removal of form for Shelves, Cooking platforms etc (Cast in situ), complete all as specified and as directed.

Providing and laying Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent for flooring/cooking platforms/ Shelves and cooking flat forms etc in required design and patterns, in linear as well as wall, vertical and curvilinear portions of the building all complete as per site requirement with 18 mm thick stone slab over and including 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Supply and fixing for 110 mm dia PVC (SWR) pipes single socketed, type 'B' in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fixing for 110 mm dia PVC (SWR) bends, type 'B' any radius complete all as specified and directed.

Supply and fixing for 110 mm dia PVC (SWR) couplers, type 'B' complete all as specified and directed.

Excavating on Soft/loose soil in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and as directed.

Material and labour for structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and as directed.

Taking down carefully unserviceable aluminium / copper point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc , removing all material for reuse/ issued under sch of credit and making good the disturbed surface as the existing one, complete all as specified and as directed.

Taking down exiting copper / aluminium sub main wiring complete for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

(a) One light point controlled by one way switch

(b) One Ceiling fan point/wall fan/ exhaust fan point controlled by one way switch

Material and labour for point wiring with 1.5 sq.mm copper conductor FRLS (multi strand) PVC insulated, ISI marked sheathed cable and including surface/recessed, non metallic rigid PVC conduit double lock type ISI marked not less than 19 mm dia with all fittings and other accessories and also including PVC insulated ISI marked sheathed FRLS cable size 1.5 sq.mm copper conductor as earth wire to common earth dolly including metallic box suitable for modular type switches, sockets, fan regulator etc for the following :-

(a) One three pin socket outlet 5 Amps socket on the same board with other switches.

(b) One 3 pin socket point 5 Amps on the independent board.

All as per ser item No 60.00 above but point wiring with 2.5 sq.mm cable for 15 Amps socket outlet.

Supply and fix modular switch 1 way 6A 230 Volts single pole one way complete all as specified and as directed.

Supply and fix modular switch 1 way 16A 230 Volts single pole one way complete all as specified and as directed.

Supply and fix modular socket outlets 6A 230 Volts 2/3 Pin combined 2 module complete all as specified and as directed.

Supply and fix modular socket outlets 6/16A 230 Volts 2/3 Pin combined 2 module complete all as specified and as directed.

Supply and fix ceiling rose surface backelite two to three terminal complete all as specified and as directed.

Supply and fix modular fan regulator electronic step type humming free, 120 w-2 module watts complete all as specified and as directed.

Material and labour for wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

(a) 4 x 10 sq. mm + 2 x 6 sq. mm earth wire.

(b) 4 x 6 sq.mm + 2 x 6 sq.mm earth wire.

(c) 2 x 4 sq. mm + 1 x 4 sq.mm earth wire.

Supply and fix LED luminaires square type 2' x 2' x 36 Watt with environmental friendly new generation aesthetically designed, ultra modern recess / surface mounting luminaire with high brightness SMD LEDs as light sourse sutible for armstong / gypsum or similar ceiling mounting system including connecting to ceiling rose with twin copper conductor complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of suspended linear in sleck design LED light fitting suitable for all commercial spaces capacity 36 watts, 4 feet complete all as specified and as directed.

Supply and fix surface / recess mounting 8 way vertical TPN DB with MCCB as incomer double door type, IP43 with sheet metal enclosure complete with neutral, earth bus all as specified and as directed by Engineer-in-Charge. NOTE :- (a) The quoted rate is deemed to be inclusive of necessary cable links and cable lugs if required for connections. (b) The quoted rate is deemed to be inclusive of necessary brick work and plaster to match with the existing surface complete if required.

Supply and fixing surface/recess mounting 4 Way Vertical TPN DB with MCCB as incomer double door type, IP43 with sheet metal enclosure complete with neutral , earth bus all as specified and as directed by Engineer-in-Charge. NOTE : (a) The quoted rate is deemed to be inclusive of necessary cable links and cable lugs if required for connections. (b) The quoted rate is deemed to be inclusive of necessary brick work and plaster to match with the existing surface complete if required.

Supply and fix SPN DB 4 way with 200 Amps rated bus bar double door complete all as specified and as directed.

Supply only following MCCBs/MCBs complete all as specified and as directed.

(a) MCCB 100A , 3 Pole ,16 KA

(b) MCB TP 63 A , "C" curve, 10 KA Breaking Capacity

(c) MCB TP 32 A "C" curve, 10 KA Breaking Capacity

(d) MCB TPN 63 A "C" curve, 10 KA Breaking Capacity

(e) MCB SP 6A to 32 A "C" curve, 10 KA Breaking Capacity

(f) MCB TPN 32 A "C" curve, 10 KA Breaking Capacity

Supply and install, testing and commissioning outdoor type LT electric panel CPRI approved consisting separate compartment for each out going feeders with interlocking arrangement for each feeder fabricated out of 3 mm thick MS sheet floor mounting type suitable size base frame/channel, painted with powder coated and pre coated primer including necessary PCC 1:3:6 type C2 foundation of panel board and earth work including comprising the following :- (a) Bus bar chamber of 3 phase and neutral 4 strip 415 volts with 250 Amps Copper strip - 1 set (b) Moulded Case Circuit Breaker 4 pole 36 KA breaking capacity 250 Amps capacity with Fixed type unit -1 Nos

(c) Moulded Case Circuit Breaker 3 pole 16 KA breaking capacity 100 Amps capacity with Fixed type unit - 6 Nos (4 EDB + 1 LDB + 1 Spare) (d) Three phase digital multi meter - 01 No (e) LED Indicator lamp Red, Yellow, Blue - 01 Set (f) Complete internal wiring with suitable copper conductor wires - 1 Lot NOTE :- (i) All termination of existing cable should be provided with Aluminium / Copper lugs / thimbles and suitable size of glands & rate for the same is deemed to be included in the item. (ii) Initially drawing to be submitted & got approved by Accepting Officer before commencement of this Job.

Material and labour for earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. (for LT Panel ) complete all as specified and as directed.

Material and labour for earthing with G.I. earth pipe 4.5 m long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required complete all as specified and as directed.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supply and installing 300 mm width X 50 mm depth X 1.6 mm thickness perforated hot dipped Galvanized Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5 %, in convenient sections, joined with connectors suspended from the ceiling with GI suspenders including G.I bolts & nuts etc as required complete all as specified and as directed.

Supply and installing 300 mm width X 50 mm depth X 1.6 mm thickness perforated hot dipped Galvanized Iron bends (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5 %, joined with connectors suspended from the ceiling with ceiling with GI suspenders including G.I bolts and nuts etc as required complete all as specified and as directed.

Supply and installing 300 mm width X 50 mm depth X 1.6 mm thickness perforated hot dipped Galvanized Iron "Reducer" (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5 %, joined with connectors suspended from the ceiling with ceiling with GI suspenders including G.I bolts and nuts etc as required complete all as specified and as directed.

Supply and fix MCB channel white – Din 35 Rail (35 x 7.5 x 0.8 mm) White plated ,chromate passivated and zinc plated complete all as specified and as directed.

Supply and Laying of one number PVC insulated & PVC Sheathed/XLPE power cable of 1.1 KV Grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required complete all as specified and as directed by Engineer-in -Charge. (a) Above 35 sq.mm and upto 95 sq.mm

Cutting of road/ PCC for laying of UG cables upto a length of 3 m complete further laying of cables through GI pipe and filling with PCC and making the surface smooth with the existing surface complete all as specified and as directed. NOTE : (a) The quoted rate is deemed to be inclusive of GI pipe of upto 100 mm bore. (b) The depth of the cable after laid to be in the same plane as that of the connected earth work. (c) The sides of the GI pipe is required to be sealed properly to avoid moisture.

B5BUILDING SOLUTIONS (BID ID -3423495)

Suneetha Engineers and Contractors (BID ID -3424024)

MAHESH CHIKKAIAH (BID ID -3420601)

Kaveri Enterprise (BID ID -3424303)

ANAND REFRIGERATION (BID ID -3422502)

SAPTHAGIRI CONSTRUCTIONS (BID ID -3423807)

Lucky Enterprises (BID ID -3422424)