Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.8 LAdmitted-Finance VPO DUMERKHA KALAN TEH NARWANA 126116 | DUMERKHA KALAN | JIND | HARYANA | 126116 | ₹11.8 L | L1 | Admitted-Finance |
| 2 | L2₹11.9 LAdmitted-Finance PLOT 411 GALI NO 9 GANDHI NAGAR GANDHI NAGAR 122001 | GANDHI NAGAR | GURUGRAM | HARYANA | 122001 | ₹11.9 L | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | The V.K. Co-Operative Labour & Construction Society Limited L1 | THE JIYA CO-OPERATIVE LABOUR & CONSTRUCTION SOCIETY LIMITED L2 |
|---|---|---|---|---|---|
| 1.00 | Supply and erection of 2.5 sq mm, 2 core flat PVC aluminum wire( make RCI, Havell’s, Plaza, Anchor, CSI, Delton, Sky tone) approximate 7 mtr per light. Actual measurement will be done at the time of installation.
Rate is taken from work order no. MCF/EE-Elect./2022/1070 dated 29.08.2022 | 1,000 | Metre | 18 ₹18,000 Lowest | 20 ₹20,000 |
| 2.00 | Supplying, installation, Testing and Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency )85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver effidency )85%,THD ( 10% as per IEC 61000-3-2, ?. F.=0.95, IP-66,IK-10, CRI )80, under voltage and over voltage protection, EMI-EMC As per CISPR-15, lenses for beam angle as per IESNA type MII/III as per the width of the road and the project requirement.. suitable to fit in up to 65mm dia pipe, life time (LED,Driver andelectrical circuitry) of minimum 50000 Buming Hours with 70% of iritial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K/5700°K/6000°K/6500°K (AS per ANSI Bin),SDCM(Standard Devlation Color Matching) (5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 2=105 (120 Im/Watt output. LM79 and LMBO Test
report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as apcroved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED juncton
temperature shall not rise above 90°C). 72 watt.... | 400 | Each | 2,030 ₹8,12,000 Lowest | 2,040 ₹8,16,000 |
| 3.00 | Supplying, installation, Testing and Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency )85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver effidency )85%,THD ( 10% as per IEC 61000-3-2, ?. F.=0.95, IP-66,IK-10, CRI )80, under voltage and over voltage protection, EMI-EMC As per CISPR-15, lenses for beam angle as per IESNA type MII/III as per the width of the road and the project requirement.. suitable to fit in up to 65mm dia pipe, life time (LED,Driver andelectrical circuitry) of minimum 50000 Buming Hours with 70% of iritial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K/5700°K/6000°K/6500°K (AS per ANSI Bin),SDCM(Standard Devlation Color Matching) (5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 2=105 (120 Im/Watt output. LM79 and LMBO Test
report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as apcroved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED juncton
temperature shall not rise above 90°C). 90 watt.. | 100 | Each | 2,900 ₹2,90,000 Lowest | 2,950 ₹2,95,000 |
Tender Value
₹11.8 L
EMD Value
₹23,620
Closing Date
26 Aug 2026, 5:00 pmClosed
Ashwani Gour
Municipal Corporation Faridabad
Supply and erection of LED light 90/ 72W for replacement of existing Old/ damaged / Non-functional LED lights at various locations of Ward No. 40, Ballabgarh Constituency. Including 5 years defect liability period, ON/OFF of street lights and watch a
2026_HRY_542370_1
2026AA4074E7 B674 4FA8 8F18 BEE594532A05284ULB
Open Tender
Electrical Works
Works
90 days
Faridabad (MC)
Supply and erection of LED light 90/ 72W for replacement of existing Old/ damaged / Non-functional LED lights at various locations of Ward No. 40, Ballabgarh Constituency. Including 5 years defect liability period, ON/OFF of street lights and watch a
2 documents required · 2 mandatory
₹500
₹23,620
Yes
27 Aug 2026
20 Aug 2026
27 Aug 2026
20 Aug 2026
26 Aug 2026
20 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and erection of 2.5 sq mm, 2 core flat PVC aluminum wire( make RCI, Havell’s, Plaza, Anchor, CSI, Delton, Sky tone) approximate 7 mtr per light. Actual measurement will be done at the time of installation.
Rate is taken from work order no. MCF/EE-Elect./2022/1070 dated 29.08.2022 | - | Metre | - | - |
| 2 | Supplying, installation, Testing and Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency )85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver effidency )85%,THD ( 10% as per IEC 61000-3-2, ?. F.=0.95, IP-66,IK-10, CRI )80, under voltage and over voltage protection, EMI-EMC As per CISPR-15, lenses for beam angle as per IESNA type MII/III as per the width of the road and the project requirement.. suitable to fit in up to 65mm dia pipe, life time (LED,Driver andelectrical circuitry) of minimum 50000 Buming Hours with 70% of iritial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K/5700°K/6000°K/6500°K (AS per ANSI Bin),SDCM(Standard Devlation Color Matching) (5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 2=105 (120 Im/Watt output. LM79 and LMBO Test
report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as apcroved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED juncton
temperature shall not rise above 90°C). 72 watt.... | - | Each | - | - |
| 3 | Supplying, installation, Testing and Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency )85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver effidency )85%,THD ( 10% as per IEC 61000-3-2, ?. F.=0.95, IP-66,IK-10, CRI )80, under voltage and over voltage protection, EMI-EMC As per CISPR-15, lenses for beam angle as per IESNA type MII/III as per the width of the road and the project requirement.. suitable to fit in up to 65mm dia pipe, life time (LED,Driver andelectrical circuitry) of minimum 50000 Buming Hours with 70% of iritial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/4000°K/5700°K/6000°K/6500°K (AS per ANSI Bin),SDCM(Standard Devlation Color Matching) (5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 2=105 (120 Im/Watt output. LM79 and LMBO Test
report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as apcroved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED juncton
temperature shall not rise above 90°C). 90 watt.. | - | Each | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.98 MB
BOQ_621837.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].