Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹45.3 L+₹2.2 L (4.99%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹48.2 L+₹5.1 L (11.8%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹48.5 L+₹5.4 L (12.4%)Rejected-Finance | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹48.5 L+₹5.4 L (12.5%)Rejected-Finance | L5 | Rejected-Finance Not lowest |
Tender Value
₹45.4 L
EMD Value
₹90,880
Closing Date
12 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
REPAIRS TO BLAST WALL, EARTHEN TRAVERSE AND PETTY REAPIRS WORKS INSIDE DRDL AND ASL BLDGS, AT DRDL HYDERABAD
2023_MES_615881_2
GE I KBAGH TOKEN 65 OF 2023 2024
Open Tender
Civil Works
Item Rate
240 days
GE I R and D Kanchanbagh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹90,880
Yes
18 Dec 2023
29 Sept 2023
14 Oct 2023
29 Sept 2023
12 Oct 2023
6 Oct 2023
29 Sept 2023 - 6 Oct 2023
Amount
Cutting of bushes, plants,shurbs n exc 30 cm girth incl all vegetation etc and cleaning complete all as specified and directed by Engineer-in-Charge.
Surface excavation n. exc 30 cm deep and averaging 15 cm deep in hard/dense soil and getting out, complete all as specified and directed by Engineer-in-Charge.
Excavation in post holes ( or similar holes) each n.exc 0.5 CUM and getting out in hard/dense soil, complete all as specified and directed by Engineer-in-Charge.
Removing of excavated surplus soils n.exc 50 m and depositing where directed at a level n.exc 1.5 m from above the starting point, complete all as specified and directed by Engineer-in-Charge.
Demolition of plain cement concrete in ground floors/pavings n.exc 15cm thick below or above ground level, and removing rubbish outside MoD land complete all as specified and directed by Engineer-in-Charge.
M&L for 100 mm thick Cement Concrete (1:3:6) Type C2 (40mm Graded Stone Aggregate) as in Plinth protection , etc., finishing the cement concrete surface even and smooth without using extra cement, including Use and Waste of necessary Form Work, complete all as specified and directed by Engineer-in-Charge.
M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 100mm thick finished even & smooth w/out using extra cement, complete all as specified and directed by Engineer-in-Charge.
Demolition of Cement Concrete (un-reinforced) of any description and in any Position not otherwise specifically provided for and removing the same outside MoD land complete all as specified and directed by Engineer-in-Charge.
M&L Cement Concrete (1:3:6) Type C2 (20mm Graded Stone Aggregate) as in Surface Channels and Drains, etc., including Use and Waste of necessary Form Work, complete all as specified and directed by Engineer-in-Charge.
M&L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as in coping including form work, complete all as specified and directed by Engineer-in-Charge.
Demolition of Cement Concrete (reinforced) of any description and in any Position not otherwise specifically provided for and removing the same outside MoD land complete all as specified and directed by Engineer-in-Charge.
M&L Pre-Cast RCC (1:2:4) Type B1 (20mm Graded Stone Aggregate) as in Cover Slab of Manholes, Septic Tanks or Similar Articles with Plain Faces and Set in Cement Mortar (1:4) complete all as specified and as directed. Note : Reinforcement shall be Measured and paid seperataly under relevant items.
M&L for providing pre cast RCC type B-1, 1:2:4 (using 20mm graded stone agg) as in posts, struts etc area exc 100 and n exc 250 Sqcm with or without chamfered angles complete all as specified and directed by Engineer-in-Charge.
M&L PCC 1:2:4 type B-0 (using 12.5mm grade stone agg) as in benching, roof kurbs,etc with form work incl demolition of old concrete and removal outside MoD land
Demolition of Brick Work built in Cement Mortar including all quoin, Arches, Pillars, etc. of any descriptions, complete all as specified and directed by Engineer-in-Charge.
M&L brick work with sub class 'B' Fly ash bricks (with old size bricks) straight or curved on plan exc 6.00m mean radious, built in CM (1:6) complete all as specified and directed by Engineer-in-Charge.
M&L brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick built in CM 1:6.
Demolition of stone masonary built in cement mortar including all quoins, arches, pillars, copings etc, complete all as specified and directed by Engineer-in-Charge.
M&L for walling of random rubble masonary Secunderabad type, well bedded, bonded and solidly hearted built in CM (1:4) ,complete all as specified and directed by Engineer-in-Charge.
All as per srl item No.19 above but except stone
Dismantling of floor, hearth or wall tiling, incl cement mortar beeding but, not backing and removing the rubbish off the premises outside MoD land at any position, complete all as specified and directed by Engineer-in-Charge.
M&L for 30mm thick Paving tiles using white cement and pigments of size 380mm x 380mm with wear resistant coating of approved design laid with cement slurry @ 3Kg/ Sqm over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. Make:- Phoenix/Prerna/Premier or equivalent.
M&L 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair, complete, all as specified and as directed.
Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site outside MoD land, complete all as specified and directed by Engineer-in-Charge.
M&L 15 mm thick rendering in cm 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.
M&L Rendering 15mm thick in CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement.
Removing/demolition of rusted and unserviceable barbed wire fencing of any size (each line) and any position, complete all as specified and directed by Engineer-in-Charge.
S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straing and fixing to any type of standard rails, straining bolts incl securing or tying at crossings with and provision of galvanised mild steel wire, staples and pins etc, complete all as specified and directed by Engineer-in-Charge.
All as per item No.28 above but fixing only ( material obtained from item No.27 to be used )
Restraining resucuring including making good staples etc, steel barbed wire any dia barbed with barbs spacings, complete all as specified and directed by Engineer-in-Charge.
Dismantling of old damaged chain link fencing wiremesh any type and size, complete all as specified and directed by Engineer-in-Charge.
Fixing only chain link fencing incl line wires any mesh size and type to any type of standards and incl provn of binding wire, complete all as specified and directed by Engineer-in-Charge.
Supply only chain link galvanised fencing any type or size, complete all as specified and directed by Engineer-in-Charge.
Dismantling of (steel, wood, or RCC) posts or struts embedded in ground, any section incl taking out embedded portion and making good disturbed ground, complete all as specified and directed by Engineer-in-Charge.
All as per item No. 34 above but posts embedded in concrete, brick work, masonary, etc, complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed by Engineer-in-Charge.
S&F MS work as in Post and strurts in fencing incl cutting tops to make shape as directed, drilling holes, notching for wire etc, flate iron fillet ( for securing wire mesh etc) incl all necessary drilling, bolting, riveting etc and similar work, complete all as specified and directed by Engineer-in-Charge.
Welded steel wire fabric supplied and fixed complete to wood or steel members, weight per square metre n.exc 4 Kg, complete all as specified and directed by Engineer-in-Charge.
All as per item No.38 above but fixing only
M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation/mass filling all as complete all as specified and directed by Engineer-in-Charge.
Forming 12mm thick Expansion joints filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'B' 100mm deep, complete all as specified and directed by Engineer-in-Charge.
Forming embankments including raising ( or lowering earth), spreading in layers n exc 30 cm thick; watering, ramming and finishing to reqd size, shape etc, n exc. 1.5m high from base, complete all as specified and directed by Engineer-in-Charge.
All as per srl item No.42 above but exc 1.5m high from the base.
Preparing plastered or unplastered new surfaces of walls and applying two coats of cement base paint, white or tinted on plastered surface walls , complete all as specified and directed by Engineer-in-Charge.
S&F mild steel TMT bars 10mm dia and over cut to length bent to shape reqd including cranking bending spirally for hoping columns hookings ends binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-in-Charge.
S&F mild steel TMT 5mm dia and over upto and including 10mm dia in stirrups spaces and binder, complete all as specified and directed by Engineer-in-Charge.
M&L for broken glass coping on top of wall in CM (1:3), complete all as specified and directed by Engineer-in-Charge.
Raking out cement mortar joints on Random Rubble masonary wall, complete all as specified and directed by Engineer-in-Charge.
Providing flush pointing to Random rubble masonary in CM (1:4), complete all as specified and directed by Engineer-in-Charge.
M&L for raised pointing to Random Rubble Masonry brought upto courses in Cement Mortar (1:4), complete all as specified and directed by Engineer-in-Charge.
S&F 3mm thick PVC tiles/sheets laminated plain coloured marbled mosaic or mottled finish laid with approved rubber based adhesive in floors, including dismantling of existing floor, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of new Steel and iron surfaces exc 10 cm width or girth and applying 2 coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of old treated steel and iron surfaces exc 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.
S&F for MS work in Bands, straps, supports or stays for RWP, ventilating pipes, gutters including bolts, if reqd hooks (stay), clamps, holdfasts, wall ties, nosing angles, hooks for hanging fans and similar small articles conforming to Fe-290 gde E-165
Complete removal of exisitng treatment on wall surfaces and applying of two coats of oil bound distemper over one coat of primer with white cement based putty finish.
All as per item No. 55 above but on new plaster surfaces.
M&L for Preperation of new surfaces of walls and applying Two Coats of Cement base paint over primer
M&L for cutting grooves in stone/brick wall, 75mm wide and 65mm deep and shaping horizontal faces of grooves with cement mortar in CM (1:3) and making good in CM (1:3) after inserting membrane into the groove all as directed.
SRI SAI ENTERPRISES
SUN LIGHT HOUSE
Anjana corporation
Venkat Sai Enterprises
M/S GDR CONSTRUCTIONS
BHAGYARAM ENTERPRISES
ELEVATORS MAINTENANCE ENGINEER WORKS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .