GE (N) P/TOKEN- 33 OF 2022-2023REPAIRS TO JOINERY, PLASTERING, FLOORING, PLUMBING, SANITARY FITTINGS AND MISC REPAIRS AT GHORPADI AREA, STN CELL, ADV HQ SWAC, LIASION UNIT, DMSA ETC UNDER GE(N) PUNE

Amount

Taking down chowkats or frames n.exc 1.5 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and as directed

-Ditto- all as per srl item No 01 above but exc1.5 sqm but n.exc 4 sqm each complete all as specified and as directed

Taking down shutters of any description n.exc 1.0 sqm each complete all as specified and as directed

-Ditto- all as per srl item No. 03 above but exc 1.0 sqm but n.exc 2.0 sqm each complete all as specified and as directed

Taking down shutters of any description exc 1.0 sqm but n.exc 2.0 sqm each and refixing in same opening complete all as specified and as directed

Resecuring or easing & adjusting without taking down shutters of any description exc 1.0sqm but n exc 2.0 sq. m each complete all as specified and as directed

Resecuring or easing & adjusting without taking down shutters of any description exc 2.0 sq. m each complete all as specified and as directed

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and as directed NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (single extruded process) material with density 780 Kg/ Cum and complete all as specified and as directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory made solid PVC molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick moulded prelam PVC Sheet on the front face & 5mm thick prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick PVC lipping all around the edges, fixing in frame at site complete all as specified and as directed Note : All screws shall be self tapping and length of screw not less than 50 mm.

S&F factory made fully glazed/wire gauge (single piece both side) PVC prelam door shutter 33-35mm thick (style) consisting of frame made out of mild steel tube of size 19mm x 19mm (19 gauge) for top and bottom rails and in styles. Single piece plain coloured PVC sheets 5mm thick to be used to cover styles and rails. For edges plain coloured PVC sheet strip of 20mm width stuck inside with solvent cement for stiles, top rail, lock rail and bottom rail on either side and as gap insert with PVC board 22mm to 25mm solid core board for styles and rails. Panel will be of wire gauges of stainless steel wire colth, 0.25mm to 0.36mm nominal dia of wire & average width of aperature 1.40mm to 2.0mm and wire cloth shall be covered with aluminum XPM in rhombus shape, in one piece from from top rail to bottom rail fixed with self tapping stailess steel screws not less than 50mm long complete all as specified and as directed. Make: Rajshri/Sintex/Duraplast/Accucell.

S&F for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides incl 2nd class HW plain cover fillets 35 x 6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and as directed.

S&F for 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Pt I, section 8, clause 8.24 (a) supplied and fitted to chowkats including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

-Ditto- all as per item No 14 here in before, but fixed in repair complete all as specified and directed

S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane including hacking out existing broken glass complete all as specified and as directed.

-Ditto- all as per item No 16 here in before, but frosted glass complete all as specified and as directed

S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as specified and as directed.

S&F in repair, 150mm, Mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.

-Ditto- all as per item No 19 here in before, but fixed in repair complete all as specified and as directed

S&F in repair 125mm size extruded aluminium alloy handles, fabricated type, anodised fixed with screws on door complete all as specified and as directed.

S&F in repair 250mm size aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F in repair 150mm size aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F in repair stainless steel Hat pegs, solid body,125mm to 175 mm fixed with screws on door or wall complete all as specified and as directed.

S&F in repair steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded with necessary holdfast incl PCC(1:2:4) and fixed to wall complete all as specified and as directed

S&F in repair steel ventilator with top hung shutter including hinges, steel peg stay, with necessary holdfast incl PCC(1:2:4) and fixed to wall complete all as specified and as directed.

M&L for welding in repairs exc 2.5cm but n exc 5cm in length and thickness of metal to be welded n.exc 6mm complete all as specified and directed

M&L for welding in repairs exc 2.5cm but n exc 5cm in length and thickness of metal to be welded exc 6mm but n.exc 9mm complete all as specified and as directed

S&F in repair framed work as in doors or gates of angle or other section with gusset plates, rails,braces, guard bars etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed Fe 410-W (Gde-E- 250) quality-A

S&F in repair 0.56mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) fixed with neil or screws or nut & bolts etc complete all as specified and as directed.

S&F in repair 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and as directed

S&F in repair aluminum die cast body door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repair mild steel wire type-I or chain type, Gate and shutter, hooks and eyes 100mm size fixed complete all as specified and as directed

S&F in repair magic eye stainless steel body and fixed on door complete all as specified and as directed.

S&F repair of 2nd class HW clean sawn timber framed and fixed in scantlings, to replace old and decayed timber of chowkhat or other works etc (including piecing,scarfing, etc of old and new timbers if required) and removing defective portions to store complete all as specified and as directed

S&F stainless steel hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and as directed. Make: Action tesa, Century, Kitply

S & F shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S&F 18/19mm thick particle board for insulation purposes fixed fixed with to timber framed work inl taking down with existing one complete all as specified and as directed.

S & F continuous (piano) hinges, stainless steel, width of flaps (when open) in 20mm, 0.8mm thick complete all as specified & directed.

S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm incl 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed by Engr-in-Charge.

S&F in repair for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Cat louge numbers of Jindal company or equivalent make complete all as specified and as directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F in repair drapery rod of stainless steel 20mm dia complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as specified and as directed.

M&L for fixing of snake guard/door seal made aluminum colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specified and as directed.

M & L for rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& rough incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and as directed. Note : Rate for form work shall be deemed to be included in the rate quoted by the contractor.

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of exterior acrylic emulsion paint over a coat of primer for facia, chajja, and roof projection etc all as directed by Engr-in-Charge.

M&L Fly ash brick work using old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 including demolition of existing brick work complete all as specified and as directed.

M & L for Providing precast cement concrete, PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate), as in louvres and jallies, 25mm thick (measured solid), including all mouldings, set in CM 1:4 complete all as specified & as directed.

M & L for RCC (nominal mix) 1:2:4, type B-0 (using 12.50mm graded crushed stone agg) as in coping of walls, canopies, and in the shelves and the like incl form work complete all as specified & directed.

M & L for Mild steel TMT bars 8mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & as directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior acrylic emulsion paint over a coat of primer on new surface all as specified.

M&L for rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD of any tint over a coat of primer all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete all as specified and as directed

S&F for glass dividing strip 3mm thick, 38mm wide and inserted in position to confirm to design complete all as specified & as directed.

M&L for 40mm thick Cement concrete 1:2:4 type B-1(using 20mm graded stone agg) as in floor, finished even and smooth without using extra cement, incl demolition of existing cement concrete all as specified and as directed.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles incl 20mm thick screed bed or bedding layer in CM 1:6 and demolition of existing tiles complete all as specified and as directed.

M&L coloured vitrified double charge tiles 10mm thick (square/rectangular) area of each tile exc 0.18sqm but n.exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles incl 20mm thick screed bed or bedding layer in CM 1:6 and demolition of existing tiles complete all as specified and as directed.

-Ditto-all as per item No 63 here in before, but skirting, dado on vertical surfaces including 10mm thick rendering in cement mortar 1:4 and demolition of existing tiles complete all as specified and as directed.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and demolition of existing tiles complete all as specified and as directed.

M&L Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade incl making full curving the edges and demolition existing stone slab complete all as specified and as directed.

M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and as directed

S&F for rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made frome virgin grade of polyetjylene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank complete all as specified and as directed. Make: Sintex, Polycon, Rotex

-Ditto- all as per item No 68 here in before, but 1000 Ltrs capacity complete all as specified and as directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and as directed. Make: Jindal, TATA, Ravindra

-Ditto- all as per item No 70 here-in-before, but fixing only complete all as specified and as directed

S&F 20mm bore tubes med grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and as directed. Make: Jindal, TATA, Ravindra

'-Ditto- all as per item No 72 here-in-before, but fixing only complete all as specified and as directed.

M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and as directed.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor complete all as specified and as directed. Make : Cera/Prayag/Johnson Pedder.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. Make : Cera/Prayag/Johnson Pedder.

S&F in repair vitreous china WHB white of bowl size 550 x 440mm incl waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified and as directed. Make : Cera/Prayag/Johnson Pedder.

S&F in repair vitreous china WHB angle back,white of bowl size 400x400mm incl waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified and as directed. Make : Cera/Prayag/Johnson Pedder

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete all as specified and as directed. Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and as directed. Make : Cera/Prayag/Johnson Pedder.

S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm complete all as specified and as directed. Make : Prayag/Polytuff.

S&F in repair cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified and as directed. Make : Prayag/Polytuff.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in replacement stainless steel plate rack of size 609mm X 609mm X 254 mm complete all as specified and as directed. CAT Part No:- P-310 of Prayag or of equivalent make as per Appx 'A' as approved by GE

S&F in replacement stainless steel plate rack of size 609mm X 762mm X 254 mm complete all as specified and as directed. CAT Part No:- P-330 of Prayag or of equivalent make as per Appx 'A' as approved by GE

S&F in replacement stainless steel plate rack of size 609mm X 914mm X 254 mm mm complete all as specified and as directed. CAT Part No:- P-336 of Pryag or of equivalent make as per Appx 'A' as approved by GE

S&F in replacement stainless steel plate rack of size 787mm X 914mm X 254 mm complete all as specified and as directed. CAT Part No:- P-348 of Prayag or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and as directed by Engr-in-charge. Make : Jaquar Cat No ALD-573 or of equivalent make as per Appx 'A' as approved by GE

S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, complete all as specified and as directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE

S & F in repair brass Chromium plated towel rail complete all as specified and as directed. Make: Johnson Fusion series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE

S&F in repair Brass Chromium plated towel ring complete all as specified and as directed. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and as directed. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs Pillar taps Swan Neck suitable for 15mm bore pipe long body fancy type brass CP with Capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as directed. Make : Johnson Magna series Cat part No: T2804C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs pillar tap suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as directed. Make: Johnson VIVA new series Cat Pt No: T4801C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION Series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and as directed. Make: Johnson Eco Cat part No: T3910C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs two way bib tap with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and as directed. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe complete all as specified and as directed. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair toilet paper holder of stainless steel, complete all as specified and as directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.

S&F in replacement 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified and as directed.

S&F in repair grating round 75 mm size of CP with/without hole complete all as specified and as directed.

S&F in repair grating round 100mm size of CP with/without hole complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified and as directed.

S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified and as directed.

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and as directed.

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and as directed.

Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good of surface including removing /refixing of CI/GI pipe lines complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

M & L textured heavy duty exterior tiles of size 300mmx300mmx10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 15mm thick in CM (1:4) incl demolition of existing tiles complete all as specified and as directed. Make: Johnson Endura textured design or equivalent of Kajaria/Somany).

M&L for Machine cut kota stone slab flooring 18-20mm thick over in riser of steps, skirting, dado and pillar laid over 10mm thick packing of plaster in CM 1:4 and jointed with cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed

M&L for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.

M&L for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed

M&L for preparation of new surfaces of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Gauri Associates

Vijay Construction and Company

THE SAIRAM CONSTRUCTIONS