installation of high mast light near billal masjid in ward no 18 hiriyur cmc limits

installation of high mast light near billal masjid in ward no 18 hiriyur cmc limits

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Fabrication, Supplying, Erection, Testing and Commissioning of ms long

Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section)...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Single Arm Bracket with 2000 mm Standa...

Supply of LED Floodlight 240W floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injecti...

11 kV XLPE or Heat resistant PVC insulated PVC exutruted Inner Seath Armoured LTUG Cable as per IS1554 Part1 or IS7098 Part1 Armouring strip thickness and resistivity as per IS3975 16 Sqmm 4 Core 1...

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm Common SR Volume-6 (KPTCL, ESCOMs & PWD Ele) page no 15 item No 35.01

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. Common SR Volume-6 (KPTCL, ...

Brass Cable Gland 25 mm Common SR Volume-6 (KPTCL, ESCOMs & PWD Ele) page no 28 item No 63.01

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to

20A single phase Class-1 Accuracy with Temper Proof Energy

Meter. Common SR Volume-6 (KPTCL, ESCOMs & PWD Ele) page no 19 item No 5...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32 amps Common SR Volume-6 (KPTCL, ESCOMs & PWD Ele) page no 14 item No 5...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. Common SR Volume-6 (KPTCL, ESCOMs & PWD E...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 5.14.1 ...

Supplying and fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capac...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...