84863 SPL REPAIRS TO INTERNAL ROAD OF BLDG NO 7, VICTORIA ROAD OF SOUTHERN COMD SIGNAL REGIMENT IN THE AREA OF AGE BR (EAST) UNDER GE (NORTH) PUNE

Amount

Scarifying or picking gravelled, macadam or bituminious macadam surfaces in area not exc 400 sqm, depth exc 50mm and not exc 100mm and removing the same to a distance not exc. 50m and stacking where directed complete all as specified and as directed.

M&L for Preparing existing black top surfaces of road using pressure compressor for cleaning and removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and providing & applying evenly a priming/tack coat with bituminous primer VG-10 grade at 7.5 kg per 10 sqm of road surface with mechanical sprayer operated by hot pressure mechanism complete all as specified and as directed.

M&L for providing and laying 75mm or less thickness (consolidated thickness) premixed Bituminous Macadam (design mix) with crushed and graded coarse stone aggregate filler (cement) and sand (fine aggregate) mixed with 4% binder content (using paving bitumen VG-30 grade by weight of total mix) mixing bituminous macadam in the hot mix mechanical plant and laid with mechanical paver complete rolled with 8 to 12 tonne power roller to required camber and gradient complete all as specified and as directed. (NOTE : (i) Mixing of BM shall be carried out in Hot Mix plant and laying, spreading of BM shall be carried out uniformly by using automatic type sensor paver. (ii) The design mix for BM considering bitumen content as specified shall be carried out from any one of the Institution as specified in particulars specifications & cost thereof shall be deemed to be included in quoted rate. (iii) The quantity of bitumen shall be provided as per design mix approved by GE (iv) Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No.)

M&L for preparing existing black top surfaces of road using pressure compressor for cleaning & removing caked mud etc. sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat and applying evenly a priming/tack coat of 2.5 kg/10sqm on black top surfaces and providing and laying bituminious premix hot mix Asphaltic Semi Dense Concrete (design mix) 30mm thick (consolidated) thickness with 5.5% binder content (paving bitumen VG-30 grade) by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and directed. (NOTE : (i) Mixing of SDAC shall be carried out in Hot Mix plant and laying, spreading of SDAC shall be carried out uniformly by using automatic type sensor paver. (ii) The design mix for SDAC considering bitumen content as specified shall be carried out from any one of the Institution as specified in particulars specifications & cost thereof shall be deemed to be included in quoted rate. (iii) The quantity of bitumen shall be provided as per design mix approved by GE (iv) Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No.)

M&L for preparing of black top surfaces of road and applying thermo plastic paint 3mm thick for making lines, dashes, arrows, letters etc exceeding 10cm wide on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sign glass beads @ 250 gms per Sqm area confirming to MORTH & BIS specification, not less than 2.5mm thick of white/golden/ yellow as approved colour/ shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e. cleaning of surface by removing all dust, dirt oil grease etc complete all as spcified and directed.

S & F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufacturer's instructions including taking out old unserviceable Cat eyes of any description etc. complete all as specified and as directed.

S&F in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer's instructions etc. including taking out old unserviceable Cat eye / studs of any description complete all as specified and directed. (NOTE for Ser. Item No. 6.00 & 7.00 above : The sample and make of Cat eyes shall be approved by GE before procurement by Contractor.)

S&F in repairs un-breakable traffic convex mirror of 40 inch dia fixed over and including 50mm bore S 304 pipe of length 2000mm including embedding in PCC 1:2:4 type B-1 (300mm x 300mm x 450mm) and including necessary excavation and earthwork etc. complete all as specified and as directed. (NOTE : The sample and make of Convex mirror is to be approved by GE as per the ground requirement, before procurement by Contractor.)

Dismantling stone slab/tiles of any description or thickness, laid dry or laid dry and pointed as in floors, hard standing, Apron etc complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M&L for 100mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

M&L for Providing and laying 60mm thick factory made (ISI Marked) chamfered edge cement concrete interlocking paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine crushed stone sand, compacting and proper embedding/ laying of inter locking paver blocks into the crushed stone sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with crushed stone sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all specified as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry or precast solid block masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width, type C-1, 1:3:6 (using 20mm grade crushed stone aggregate) and setting in CM 1:6, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick/concrete wall surfaces finished fair and even complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of any description, width or girth and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

MOHANLAL MATHRANI CONS. PVT. LTD. (BID ID -3388277)

Aadarsh Bharat Enviro Pvt Ltd (BID ID -3383319)

Sunshine Ventures (BID ID -3385792)

SHREE KALIKA CONSTRUCTION (BID ID -3395836)

YOHAN ENGINEERS AND CONTRCTORS (BID ID -3388053)