WELCOME MAINTENANCE AND CERTAIN OTHER B/R MAINT SERVICES TO OMQs IN SECTOR 31 UNDER GE (AF) MC CHANDIGARH

Amount

M&L for applying one coat of oil bound distemper on wall,white or tinted, including prepration of old surface complete all as specified and directed by Engr-in-Charge.

M&L for applying one coat of oil bound distemper on ceiling, white including prepration of old surface complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment on surfaces of wall all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on brick walls & concrete surfaces of building including racking out joints, hacking for key, scrubbing down with water complete including necessary scaffolding/working platform all as specified & including M & L for rendering 15 mm thick on fair face of brick surfaces or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement.

M&L for applying 1-2 mm thick (average thickness) wall care putty on wall new or old surfaces complete all as specified and directed by Engr-in-Charge.

M&L for applying two coat of oil bound distemper on wall, white or tinted over one coat of primer, including prepration of old/new surface complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick walls & concrete surfaces of building including racking out joints, hacking for key, scrubbing down with water complete including necessary scaffolding/working platform all as specified and including M&L for Rendering 10 mm thick in cement mortar (1:4) on ceiling, complete all as specified and directed by Engineer-In-Charge. .

M&L for applying two coat of oil bound distemper on ceiling, white or tinted, including prepration of old / new surface complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed by Engr- in- Charge.

M&L preparation of old wooden surfaces and applying one coat of synthetic enamel paint complete all as specified and directed by Engr- in- Charge.

M&L for preparation of old surface of wall and applying two coat of white wash in staircase, garrage complete all as specified and directed by Engr- in- Charge.

M&L for preparation of old surface of ceiling and applying one coat of white wash complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick walls, parapet, chajjas, facias of building including racking out joints, hacking for key, scrubbing down with water complete including necessary scaffolding/working platform & including M & L for rendering 15 mm thick on fair face of brick surfaces or concrete surface in cement mortar (1:4) finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. .. .

M&L Preparation of new /old plastered surface of wall/ceiling surfaces and applying two coats of weather coat paint over a coat of cement primer complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) pipes 110mm dia Single socketed, in any length with rubber ring joints fixed to walls, laid in trenches, floors.etc complete as specified.

S&F in repair for 110mm PVC (SWR) T equal and unequal complete as specified.

S&F in repair for 110mm PVC (SWR) bends any radius complete as specified.

S&F in repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3), laid in trenches or in floors complete as specified.

All as per item No. 18 here-in-before but 75 mm dia.

S&F in repair 100 mm cast iron soil waste and vent pipe in any length with or without ears jointed with cement mortar (1:3) fixed to wall complete as specified.

All as per item No. 20 here-in-before but 75 mm dia.

S&F 100 mm cast iron bends/cowls as in repairs.

All as per item No. 22 here-in-before but 75 mm dia.

Taking up or down 15 mm bore steel/ kitek tubing with connections or fittings from wall, ceiling, floor etc.

S & F GI water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, surface, cancealed, ceiling or laid in floors complete as specified.

Re-fixing old steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor or fixed to wall complete as specified.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc.

S & F Steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors complete as specified.

Re-fixing old steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling.

Cutting holes exc half brick not exc one brick into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good in brick walls, cutting exceeding exc 10 cm but not exc 20 cm girth.

M&L for, Ist quality Glazed ceramic coloured tiles in vertical surface 300mmx450mmx8mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles ,including 10 mm thick for wall finished in cement mortar 1:4 , including dismantaling floor hearth or wall tiling incl cement mortar bedding ( but not backing ) removal of rubbish off the premises debrish away from site to a disignated point by local administration outside defence land complete all as specified and directed by Engr-in-charge. Note : Contractor will produced test certificate of the company. (Make :- Orient, Kajaria, Somany )

M&L for Ist quality Non-skid Matt finish Ceramic coloured tiles 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 thick screed bed in Cement Mortar 1:6 and dismantling of existing tiles and removal of rubbish off the premises debrish away from site to a disignated point by local administration outside defence land complete all as specified and directed by Engr-in-charge. Note : Contractor will produced test certificate of the company. (Make :- Orient, Kajaria, Somany)

M&L for vitrified ceramic tiles double charged 10 mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in cement slurry and pointed in white or colour cement to match over and including screed bed 15 mm thick in cement sand mortar 1:4 complete dismantling of existing tiles and removal of rubbish off the premises debrish away from site to a disignated point by local administration outside defence land all as specified and directed. Note : Contractor will produced test certificate of the company. (Make :- Orient, Kajaria, Somany)

M&L 18-20 mm thick Granite (of any type and colour) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including M&L for screed bed 15mm thick for wall finishes in Cement Mortar 1:4 including dismantling existing incl cement mortar bedding (but not baking)removal of rubbish off the premises debrish away from site to a disignated point by local administration outside defence land.

S&F in repairs vitreous china wash One piece EWC standard size wall hanging /floor mounted white/ivory colour with dual flusing cistern white including CI "P" or "S" trap fixed as complete all as specified and directed. Make : Parryware/Cera/Jaguar etc.

S&F in repairs stainless steel (AISI-304) cockroach trap round (dia 101 mm) with and without waste hole.

S&F in repair PVC syphonic action type flushing cistern 10 lts capacity, low level with inlet, ball valve float and bracket with complete fitting complete all as specified and directed.

S&F in repairs 15 mm Bib taps long body (Fancy type) cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and as directed.

S&F in repairs Bib taps short body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed by Engr-in-charge.

S&F 15 mm fancy type angle valves cast copper alloy screwed down high pressure with crutch both ends for iron pipes or for union and fixed Cat No OPP-15053PM (Jaquar), F1015201(Cera) or Equivalents)

S&F in repairs Vitreous china table top wash hand basin, including CP waste coupling and waste pipes etc Complete. Make (Cat No(Jaquar). JDS-WHT-25907N, Cat No (CERA) S2020154, Cat No (Hindware) 91041 or equivalents)

S&F in repairs 15 mm dia Fancy type Pillar Cock quarter turn, cast copper alloy with capstan heads chromium plated screwed down all as directed by Engr-in-Charge. Make (Cat No(Jaquar). FLP-5011PM, Cat No (CERA) F1016101, Cat No (Hindware) or equivalent).

S&F in repairs 15 mm dia Single lever Basin Mixer CP without popup waste with 450mm long all as directed by Engr-in-Charge. Make (Cat No(Jaquar). COP 001BPM, Cat No (CERA) F1019451, Cat No (Hindware) or equivalent)

S&F in repairs 15 mm dia Single lever sink Mixer CP without swinging spout on upper side (wall mounted model) with connecting legs and wall flange complete all as directed by Engr-in-Charge. Make (Cat No(Jaquar). FLP 5165 M, Cat No (CERA) F1016501or equivalent.)

S&F in repairs 15 mm dia wall Mixer 3 in 1 system CP with provision of both hand shower and over head shower complete with 115mm long bend pipe and wall flange complete all as directed by Engr-in-Charge. Make (Cat No(Jaquar). FLP 5281 PM, Cat No (CERA) F1099403 or equivalent approved by GE)

S&F in repairs 15 mm dia wall Mixer Non-telephonic shower arrangement CP with connecting legs and wall flanges complete all as directed by Engr-in -Charge. Make (Cat No(Jaquar). FLP 5219 PM or equivalent.)

S&F pegs set of 6 nos Powder coated stainless steel body fixed with chromium plated cadmium screwes complete all as specified and as directed.

S&F 15 mm fancy type Stop valves cast copper alloy chromium plated with long shank and Cup ( Concealed Type) screwed down high pressure with crutch both ends for iron pipes or for union and fixed.

S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 15mm bore complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 0.80mm thick kitchen or laboratory with plugs, washers and waste coupling and PVC waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever 03 nos brackets of angle 30mmx30mm, thickness 3-4mm, 500mm long with PCC 1:2:4 B0 in wall and connecting union to pipe overall size 914mm x 460mm bowl size 410mm x 330mm x 203mm fixed in repairs.

S&F in repairs Stainless steel plate rack (utensil rack) of size 900 mm x 900 mm and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screwes including necessary fittings, nut/ bolts.

Supply & fix fancy type elegant corner glass self 300 mm with (ABS Bracket ) 300x 600 brass polished chrome complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of lengh 450 mm long.

S&F in repairs of 25 mm SS Harrison rails (Curtain rod), with fixing brackets, stops, rollers, doms, wall to wall, finel etc, of thickness 20 gauge complete all as specified and as directed.

S&F in repairs CP mild steel Jet spray (with 1.50 mtr Tube) with Fittings complete all as directed by Engr-in-Charge.

S&F in repairs health faucet brass chromium plated with hook stand Roman 2 In 1 Faucet 1.5 mtr length complete all as directed by Engr-in -Charge.

S&F in repairs Plastic water closet seat cover closed pattern with flat bottom ,and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs Chromium plated shower roses swivel shower brass chromium plated with arm 100 mm size for fixing with 15 mm pipes with swivel joints, any size including fixing to steel pipes or union.

Hacking out old broken glass (any thickness) from wooden/steel frames, glazed with putty of fixed with screws complete all as specified & directed by Engr-in-charge.

S&F sheet glass ordinary quality and glazing with oil putty in squares exc. 0.5 Sqm in each pane, thickness in 4 mm complete all as specified & directed by Engr-in-charge.

S&F Glass Sheet plain glass 4 mm thick , glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge.

S&F Figured glass, pinhead type and glazing with oil putty in square exc. 0.5 Sqm in each pane of thickness 4 .0 mm complete all as specified & directed by Engr-in-charge.

S&F stainless steel wire cloth 0.36 mm niminal dia of wire and average width of aperture 1.14 mm and with tinned tacks fixed to steel window frame all as specified & directed by Engr-in-charge.

M&L opening and closing for AC including Cutting hole of brick work including M& L for brick work built in cement mortar 1:6 with sub class 'B' bricks including plaster 15 mm thick in cement mortar 1:4 , pointing and including finishing the surface to existing matching colour to old surafces and opening.

M&L for disconnecting of PVC tank of capicity exc 500 Ltr but n. exc 1000 litres for cleaning all as specified - (a) Dewatering &Removing all settled silt ,scale & Dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hours. (b) Cleaning and rinsing the tank using fresh water to wash out complete and allowed to dry for 30 min. (c) Writting letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Refixing the tank in same position or raised /lower height after cleaning or water complete as directed by Engr-in- charge.

S & F in repair white colour rotational moulded polyethylene water storage tank triple layered (Cylindrical vertical with threaded close top), HDPE of 1000 ltrs capacity with inlet & outlet connections, 20mm dia PVC float valve with ball including all fittings, tank nipple 150 mm long with washer & plug, with tank lid having locking arrangement hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 1000 litre. Make : ISI marked of Sintex/Polytuf/Polycon

S & F in repair white colour rotational moulded polyethylene water storage tank triple layered (Cylindrical vertical with threaded close top), HDPE of 500 ltrs capacity with inlet & outlet connections, 20mm dia PVC float valve with ball including all fittings, tank nipple 150 mm long with washer & plug, with tank lid having locking arrangement hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 500 litre. Make : ISI marked of Sintex/Polytuf/Polycon

S&F In repairs CP Towel rail 600 mm long all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sqm each.

Taking down shutters of any description exc 1 sqm and n. exc. 2 Sqm each and removing to or from store complete all as specified & directed by Engr-in-charge.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing.

M&L Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing.

M&L Factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire resisdant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for seperately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L Factory made single extruded WPC (wood polymer composite) solid decorative type flush door shutter in cupbord of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice huck/ wheat huck ) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50N/mm2, modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with necessary full body threades star headed counter sunk S.S screws,all as per direction of Engineer-In-Charge. (Note : Butt hinges and necessary S.S screws shall be paid separately)

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps when open 30mm fixed in repair complete all as specified & directed by Engr-in-Charge.

S&F in repairs Aluminium anodised barrel tower bolts of extruded section. Length of bolt is 150mm complete all as specified & directed by Engr-in-Charge.

S&F 100 mm butt hinges Medium weight ,cold rolled mild steel and fixed complete all as specified

S&F 150 mm aluminium handles cast type anodised complete all as specified

S&F in repairs Brass mortice lock 4 lever vertical type size 100 mm long complete all as specified & directed by Engr-in-charge.

S&F in repairs floor door stopper 140 mm of aluminium alloy body and tongue ,anodised with hard drawn steel spring fixed in floor complete all as specified & directed by Engr-in-charge.

S&F 150 mm size hasp and staple safety type aluminium anodized complete all as specified & directed by Engr-in-charge.

S&F in repairs Door seal strip aluminium powder coated with plastic beading exc 0.75 m but n. exc 1.0 m length fixed to wooden doors complete all as specified & directed by Engr-in-charge.

S&F in repairs 40 mm dia cupbords knobs fixed with nut screwes and washer of mild steel bright all complete all as specified & directed by Engr-in-charge.

S&F in repairs magnetic catches for kitchen cabinet and cupbords all complete all as specified & directed by Engr-in-charge.

S&F 5mm thick Plain glass sheet in Aluminium anodized E-Type Section with Rollers complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but n. exc. 5 cm in length, thickness of metal to be welded exc 6 mm but n. exc. 9mm complete all as specified & directed by Engr-in-charge.

M&L for repairs to sliding aluminium door, aluminum grills , glass , mortice lock and roller plate by taking down complete door and fittings including replacing old u/s components by providing new fittings etc. and refixing the same in old position and making good to the disturbed surface complete (cost of rubber packing, woolen gasket, aluminium beading, stainless screws, roller for sliding shall be included in basic cost of repair) all as specified & directed by Engr-in-charge.

S&F in repairs waste pipe sink and wash hand basin 32 mm dia Low Density polyethylene pipes (LDPE) of pressure rating 6 kg /cm 1 mtr long fixed complete to walls complete all as specified & directed by Engr-in-charge.

S&F powdered coated anodised aluminium frame for window, ventilator with one or more rebates with minimum powder coating of 50 micron incl jointing cleat for fixing complete all as specified. Make of aluminum section JINDAL/INDAL/HINDALCO .

S&F three track aluminium section with locking arrangement extruded anodised aluminium section in windows (Powder coated in any colour as approved by GE) with movable, openable or moving type shutter or any pattern as directed, aluminium section including handle ,tower bolt (medium weight of series -B) or size as directed, cut to size,locking arrangment , jointed together including rubber beading and all necessary fitting complete all as specified and directed. Note : Glass pane measured and paid seperately.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engr-in-Charge.

Supply and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC ultichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engr in-Charge.

S&F sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane of thickness 6.3 mm complete all as specified & directed by Engr-in-Charge.

S&F in repairs 75 mm dia cast iron FLOOR TRAP/NAHANI TRAP, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repairs marine plywood 18 mm thick of make green ply/ century ply kit ply boiling water proof and moisture resistant with laminate (Plain white) with inside of 0.6mm & outside face 1.00 mm laminate of glossy finish, complete all as specified & directed by Engr-in-Charge. Make : Archidply/ Century ply/National plywood/ Durian plywood

S & F in repairs 19 mm thick HDHMR board as in kitchen panel shutters using 1.00 mm thick decorative laminate glossy finish of make like spacewood/ INOPAN/PARACASA or equivalent of grade of boiling water proof and moisture resistant, complete all as specified & directed by Engr-in-Charge.

S &F in repairs soft close auto hinges of make Hettich kaff for fixing kitchen panel shutters, complete all as specified & directed by Engr-in-Charge.

S & F in repairs Handle G profile stainless steel all drawers of suitable size as per size of each shutters, complete all as specified & directed by Engr-in-Charge.

S&F in repairs kitchen drawers made out of 19mm thick HDF (with 10 yrs warrenty) of make like Spacewood / INOPAN/ PARACASA of grade boiling water proof and moisture resistant), complete all as specified & directed by Engr-in-Charge.

M &L for repairs/replacement of buckets of stainless steel grade 304 with PVC Coating and different size and shape with all accessories as approved by Engr-in-Charge, for modular kitchen complete all as specified & directed by Engr-in-Charge.

S&F in repairs high precision soft closed telescopic channels (1 set per drawer of make Kaff, Hettich, Hafele or equivalent as approved to meet the weight requirement 45 kg capacity within length 20 inches to ensure smooth movements of drawers, complete all as specified & directed by Engr-in-Charge.

Cutting of bushes /piple small tree protuding over wall surface/ Roof surface/terrace of building of height upto 10.0 metre including necessary scaffolding and necessary safety measure if required and make good the surface in cement mortar (1:3) and applying one coat of anti growth of vegitation chemical as directed by Engr-in-Charge and removing of unserviceable material out side MD land and cleaning site, complete all as specified and directed by Engr-in-Charger moving of unserviceable material out side MoD land and cleaning site complete all as specified and directed by Engr-in-Charge.

Demolition of RCC of roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimney and similar suspended work at any height complete all as specified and directed by Engr-in-Charge.

Formwork to chullah hoods, chajjas, facia, troughs and similar, items in cluding edges, including stagging and scafolding up to 10 mtr heights, complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete (Nominal mix) 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in chajjas, facia etc shelves and the like, at any height, complete all as specified and directed by Engr in Charge.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-Charge.

M&L Providing and injecting chemical emulsion for post constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors all as specified by Engineer-in-charge.

M&L Providing and injecting chemical emulsion for post constructional Anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified by Engineer-in-charge.

M&L Post construction treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution ) @ 0.5ltr/hole by drilling 6mm dia. Hole at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engr-in-Charge.

Taking down carefully of point wiring (Light , fan, socket or power complete fittings such as switches, Ceiling roses, pendants, regulator, sockets, Bell push) removing from site of work including making good (i.e plastering in cement mortar 1:6, one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed NOTE :- Taking down of Light fitting, MCB, DB etc to be measured and paid separately.

Taking down carefully by submain wiring/service connection of any complete including making good(i.e plastering ,one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed all as specified & directed.

Taking down carefully DB box of any sizes & capacity including making good (i.e plastering in cement mortar 1:6, one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed.

M & L for Concealed Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLSH) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic UPVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall / roof incl cutting & chases and modular flush metal boxes 0.8 mm thick ( Same as Switches Make) suitable for modular fittings including modular outer cover mirror/Glass finish plate with inner mounting frame of make Legrand (Arteor)/ Schneider (Zencelo) /Anchor (panasonic Thea) /Goldmedal (Nexon Quorra) as per site requirement for mounting modular switches, sockets etc including earth wire of PVC insulated (FRLSH) copper conductor multistranded of 1.5 Sqmm size in green colour including making good(i.e plastering ,one coat of putti and two coats of old bound distemper with matching existing surface )for One light/fan point controlled by one switch complete all as specified and directed in current SSR Part-I & II all as directed, as described below:-

All as per Srl item No. 118 here-in-before but One 3-pin socket outlet 5 Amp on independent board.

All as per Srl item No. 118 here-in-before, but One 3 pin socket outlet 5 Amp on same board.

All as per Srl item No. 118 here-in-before, but One light point controlled by 2, two switches .

All as per Srl item No. 118 here-in-before, but One bell point controlled by one switch.

All as per Srl item No. 118 here-in-before but with 2.5 Sqmm copper conductor cable and 2.5 sqmm PVC insulated standard copper conductor complete FRLS cable as continuous earth wire all as specified for One 3 pin socket outlet 15 Amp on independent board.

Material and labour for Concealed Sub Main Wiring with two run single core 6 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100 volts grade colour code cables, drawn on surface in and including UPVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 6 Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100 volts grade colour code cable for earth continuity including making good(i.e plastering ,one coat of putti and two coats of old bound distemper with matching existing surface), complete all as specified and directed Note:- Two run of 6 Sqmm (phase+ Neutral) + One run of 6 Sqmm for earth wire + One run of PVC conduit shall be measured as one RM.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module suitable for Mirror/Glass finish modular cover plate and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular switch 16/20 Amp single pole one way,1 Module suitable for Mirror/Glass finish modular cover plate with indicator and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular bell push 6 Amps single pole , 1 Module suitable for Mirror/Glass finish modular cover plate and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make: Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular socket shutter type, 2-in-1, 3 pins 6 Amps ,ISI marked, combined 2 Module suitable for Mirror/Glass finish modular cover plate and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number complete all as specified. Make : Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea)/ Goldmedal (Nexon Quorra)

Supply and Fixing Modular socket shutter type, 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module suitable for Mirror/Glass finish modular cover plate and no top gap between rocker plate and fully shrouded double rocker mechanism type all the important parameters like rating etc should be laser printed on every switch along with catalogue number complete all as specified. Make : Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea)/ Goldmedal (Nexon Quorra)

Supply and fixing of MCB protected modular socket with Modular MCB 16 Amps built in MCB+ 16 Amps Top + Socket 16 Amps with concealed metal sheet steel enclosure( same as per socket make ) with inner mounting frame and outer modular mirror/Glass finish cover for mounting complete including making good disturbed surface (i.e plastering ,one coat of putti and two coates of Apex paint ) complete all as specified and directed . all as specified and directed. Make(Model): Legrand (Arteor) / Schneider (Zencelo) / Anchor(Panasonic Thea)/Goldmedal(Nexon Quorra)

Supply and Fixing Modular ceiling rose surface bakelite Square in shape 100 mm x 100 mm, three terminals complete all as specified. Make : Goldmedal (Glassio) or equivalent in Anchor / Cera.

S&F Modular bell ding dong, 230V, 2 Module, Concealed in wall with concealed metal sheet steel enclosure (same as per bell make) with inner mounting frame and outer modular Mirror / Glass finish cover for mounting including making good (i.e plastering, one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed Make (Model) : Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea)/ Goldmedal (Nexon Quorra)

Supply and fixing MCB double pole 40 Amp, 240V, 10KA, 'C' integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air chanels etc complete all as specified. Make : Havells/ Legrand/ ABB

Supply and fixing MCB Single pole 6 to 32 Amp, 240V, 10KA, 'C' integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, with efficient air chanels etc complete all as specified. Make : Havells/ Legrand/ ABB

Supply and fixing MCB DB Single pole and neutral 12 way, concealed in wall, sheet steel phospehtised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door including making good disturbed surface (i.e plastering, one coat of putti and two coats of Apex paint with matching existing surface), complete all as specified and directed. Make : ABB /Legand /Havells

Supply & Fixing Modular fan Regulator electronic step type 100 watt, ISI marked, 2 Module, 8 step suitable for Mirror/Glass finish modular cover plate complete all as specified. Make : Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea)/ Goldmedal (Nixon Quorra)

Supply and fixing wall mounted LED bracket light,9 watt ,aesthethically designed including retrofit B22 LED bulb 09 watt including making connection with flexible copper 3 core cable 0.5 Sqmm from connector/ ceiling rose to fitting complete all as specified and directed.

Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt Invertor LED Tube fitting with inbuilt battery back up ,polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts, lumen efficacy 100 lumen/watt,total lumens 2000,complete with three core twisted flexible copper cord cable of suitable size upto 1 mtr all as specified and directed..

Supply and fixing 02 feet 10 Watt LED Batten ,lumen efficacy 100 lumen/watt,total lumen 1000, with extruded polycarbonate housing with high quality PC diffuser completewith two core twisted flexible copper conductor cable of suitable size upto 1 mtr all as specified and directed.

Supply and fixing LED Bulk head Luminaire ,10 Watt made of pressure die cast aluminium hosing with protcted diffuser ,colour temp 5000-6500K, PF >0.9 complete all as specified and directed.

Supply and Fixing Modular switch 20 Amp single pole one way, 2 Module with indicator and water heater marking and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number with inner mounting frame and outer modular mirror/Glass finish cover for mounting including making good (i.e plastering in cement mortar 1:6, one coat of putti and two coats of old bound distemper with matching existing surface), complete all as specified and directed. Make : Legrand (Arteor) / Schneider (Zencelo) / Anchor (Panasonic Thea)/ Goldmedal(Nexon Quorra)

Supply and fixing LED street light fitting 25 W powder coated, lumen efficacy 120 lumen/watt, pressure die cast aluminium body and polycarbonate cover with individual LED lense having colour temperature, 6500 +/- 500, PF >0.90 with all accessories such as connection, nut and bolt etc, complete all as specified and directed.

Supply and fixing MCB DB Single pole and neutral 4 way, concealed in wall, sheet steel phosphetised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door including making good disturbed surface (i.e plastering, one coat of putti and two coates of Apex paint with matching existing surface) complete all as specified and directed. Make : ABB/ Legand/ Havells

Note :- Amount of credit of Rs. 26963.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

AS Enterprises (BID ID -3465516)

M AND H BUILD TECH (BID ID -3473372)

B N FRIENDS AND CO (BID ID -3466695)