REPAIR TO JOINERY AND MISCELLANEOUS B/R WORKS AT CABINET SECTT UNDER GE E/M BASE HOSPITAL DELHI CANTT-10

Amount

Attending day to day complaints, adjustment & repairs / replacement of all joinery fittings, brass butt hinges, hydraulically regulated door closer, brass mortice lock, night latch, finger plate, kick plate, door stopper, aluminium D type handles, tower bolts, hasp & staple, sliding door bolt, glass door spring, aluminium door lock, aluminium door pivots etc, repairs to aluminium doors / windows / and partition complete all as specified and as directed.

Notes for item No 1:- (i) Adequate Nos of tradesmen alongwith semi-skilled helper shall be deployed by contractor for attanding complaint on day to day basis in the morning to report complaint cell by 0900hrs. The complaints received upo 1300 Hrs shall be attended on the same day. The complaints received after 1300 Hrs shall be attended on Next day before 1300 Hrs. If complaints shall not attended as per schedule, a recovery of Rs. 100/- per complaint per day shall be imposed from contractor's dues. (ii) The contractor shall deploy adequate supervisory menpower to note down and monitoring the complaints on all working days including Saturdays witth all necessary stationery such as Complaint Slip book, Complaint Register, attendance register etc. to maintain day to day complaints. (iii) The quoted rates shall includes cost of T & P, stationery, complaint slip Book, Complaint Register, Attandance Register & petty materials for repairs like Nails, Screws, fevicol etc complete. (iv) The material required shall be paid as "Supply only" under respective item of this Schedule. (v) The police verification of the employees shall be got done by the contractor and shall be submited to the Engineer in Charge alongwith oher documents at the time of approval of Manpower/ immediately after commencement of work.

Supply only in replacement 125 mm brass polished butt hinges type B12 complete all as specified and as directed.

Supply only in replacement door closer hydraulically regulated, design No 3 universal type, cast iron body, suitable for door shutter 851 mm to 1000 mm in width and of weight 61 to 80 Kg each complete all as specified and as directed. Make : Godrej/Ozon/Hardwyn

Supply only in replacement brass mortice lock 65 mm 6 lever vertical type with triplicate key and handles set complete all as specified and as directed. Make – Godrej / Harrison/Plaza

Supply only in replacement night latch complete with triplicate key, 7 lever, size 98 mm x 67 mm x 28 mm complete all as specified and as directed . Make – Godrej / Harrison/Plaza

Supply only in replacement brass mortice lock handle set for mortice lock complete all as specified and as directed.

Supply only in replacement finger plate/Kick plate of required size using transparent acrylic sheet 3 mm thick fixed with brass CP screws complete all as specified and as directed.

Supply only in replacement aluminium alloy body door stopper, double legged, 150 mm size complete all as specified and as directed.

Supply only in replacement aluminium anodized ‘D’ type handles 125 mm complete all as specified and as directed.

Supply only in replacement 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply only in replacement 150mm size brass door stopper complete all as specified and as directed.

Supply only in replacement Antique Brass Finish mortice lock with handle set of Make Archis as per the sample kept in sub Division office complete all as specified and as directed.

Supply Only in replacement 250 mm aluminium alloy, anodised sliding door bolt with hasp staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Supply only in replacement Aluminium door Pivots standard size complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for brick work with sub-class B brick, straight or curved on plan, built in cement mortar (1 : 6) complete all as specified and as directed.

M & L 15mm thick rendering in cement mortar 1: 6 on brick work or on concrete surfaces finished fair and even without using extra cement complete all as specified and as directed.

M & L for preparation of newly plastered surface of walls and applying two coats of plastic emulsion paint over and including a coat of primer over and including 3mm thick cement based wall care putty complete all as specified and as directed.

Taking down chowkhat without taking off shutters of any description are exc 1.5 Sqm and not exc 4 Sqm complete all as specified and as directed.

Taking down door shutters of any description are exc 1 Sqm and not exc 2 Sqm Each shutter complete all as specified and as directed.

S & F 2nd class hardwood plain, solid straight chowkhat & frame, framed, wrought, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

S & F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels with decorative face veneers on both faces with teak wood lapping complete all as specified and as directed

S & F 125 mm Brass polished butt hinges type B12 complete all as specified and directed

M & L for French polishing on new wooden surface of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler with two or more coats of french polishing complete all as specified and as directed

Hacking out old broken glass (any thickness) from metal frame including punching or drilling out old glazing pins complete all as specified and as directed.

S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty or rubber beading in square are exc 0.5 Sqm in each pane complete all as specified and as directed

S & F 4mm thick figured glass (pin headed type) ordinary quality and glazing with oil putty or rubber beading in square exc 0.5 Sqm in each pane complete all as specified and as directed.

Dismantling boarding/plywood etc of any description and in any position fixed with nails etc complete all as specified and as directed .

S&F 12 mm thick plywood grade BWP, type BB, fixed with screws to timber frame work complete all as specified and as directed

S&F 3mm thick teak plyboard with teak face veneers on one face on the existing woodwork complete all as specified & directed.

M&L for welding at site, at any floor, any description MS Butt hinges any size, projecting type hinges to steel window and similar articles etc (after taking down shutter), refixing in position the same and making functional complete all as specified and as directed

M&L Cleaning of glass panes with soft cloth with colin as an agent, upto 11th storey building including all necessary scaffolding / Jhulla with all safety measures complete all as specified and as directed .

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty, for aluminium door complete all as specified and as directed.

S&F in repair toughened glass door floor spring, double action including complete set of patch fitting, suitable for door and door lock set complete including taking down the toughened glass door and refixing in the same opening complete all as specified and as directed. Make Ozone/ Godrej/Hardwyn

S&F in repair brass mortice lock vertical type 100mm size 4 levers for aluminium door with duplicate keys complete all as specified and as directed .

S&F pre-laminated PVC rigid foam sheet wall panelling of 5mm thick stuck on inner frame work of 35mm wide strips of 5 mm thick rigid foam sheet. The strips shall have a groove of 6mm width and 2 mm depth for sinking the head of screw used to fix the strips to the wall and shall be placed vertically at equal intervals of 600 mm centre to centre. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners including dismantling of old wall panelling of any description complete all as specified & as directed. Make - Rajshri / Sintex

S&F mineral fibre ceiling boards 16 mm thick, 600 mm x 600 mm size, including grid 25 x 25 x 1.6 mm thick GI powder coated wall angles and 25 x 35 x1.6mm size 'T' runner, suspended at 1200 mm centre to centre and cross 'T' runner of 25 x 35 x 1.6mm size suspended at 600 mm centre to centre supported by 4 mm dia GI wire from roof / slab including wall angle and 'T' with interlocking arrangement as required for framing grid suitable for module size 600 mm x 600 mm ceiling etc including dismantling of old false ceiling of any description complete all as specified and asdirected. (Make : Armstrong RH Dune 99/ Aerolite)

M&L for GI metal false ceiling lay in plain regular edge white color tiles of size 595X595X0.5mm thick with 8mm drop made of GI sheet having galvanizing of minimum 120 gms/Sqm (both side inclusive) & electro statically polyester powder coated of thickness 60 microns(minimum) including factory painted after bending. Ceiling grid shall be of following minimum sizes: main T section (24X38X0.3mm 3m long), Cross 'T' section (24X25X0.3mm 6m long), wall angle (24X24X0.3mm 3m long), hanger rod 4mm dia, Adjust clip (85X30X0.8mm), soffit cleat (27X37X25X1.6mm), Dash fastener (12.5 mm dia) complete including dismantling of old false ceiling of any description complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed.

S&F vitrified tiles of size 600 x 600 x 9mm thick in floors fixed with tile adhesive of approved make complete all as specified & as directed.

Taking down existing aluminium windows of area not exc 1.00 Sqm each window complete all as specified and as directed.

Taking down existing aluminium windows of area exc 1.00 Sqm but not exc 2.00 Sqm each window complete all as specified and as directed.

S&F powder coated aluminium window using 63mm X 38mm X 1.6mm chowkhats with 45mm X 45mm X 1.6mm openable section as in shutter including ornamental grill & 5.5mm thick glass panes of approved make with Aluminium and rubber beading for fixing glass and including builder hardware such as aluminium handles 100mm (02 Nos), tower bolts 100mm (02 Nos), hooks and eye 150mm (02 Nos), butt hinges 100mm (04 Nos) etc complete all as directed. Note: The Windows shall be fixed to walls along with necessary rubber packing around the outer frame of windows. The rate deemed to be included in unit rate quoted.

S&F aluminium powder coated anodised aluminium window with frame & sliding shutter with 92mm x 31.75mm x 1.5mm thick three track section for frame & 40mm x 18mm x 1.5mm thick sliding section for shutters both glazed and gauzed with 5.5mm thick glass of approved make and stainless steel wire cloth (0.63mm dia of wire and 1.40mm aperture) in windows including necessary jointing cleats, powder coated glazing clips, powder coated snap beading, screws, aluminium fitting, suitable handles and rubber packing complete all as specified and as directed.

Taking down existing aluminium doors area exc 1.00 Sqm but not exc 3.00 Sqm complete all as specified and as directed.

Taking down existing aluminium partition complete all as specified and as directed.

S&F powder coated aluminium partition of approved design, using 95.6 mm x 44.8mm x 1.6mm frame work with 5.5 mm fixed thick sheet glass/12 mm thick exterior grade veneered particle board with decorative veneers on both faces as directed by Engineer-in-Charge including aluminium & rubber beading for fixing glass/board, area of each panel not exc 1.20 Sqm complete all as specified and as directed

S&F powder coated aluminium door using 96.6 mm x 44.8 mm x 1.6 mm aluminium chowkhats, 84.0mm x 44.7 mm x 1.6mm section vertical styles, 101.60mm x 44.88mm x 1.6 mm rails mounted on floor spring mortice lock ( make : Godrej/Harrison) 02 nos tower bolt 150mm , sliding bolt 300mm long 01 no, Door handles and fitting complete all as directed by Engineer-in-Charge, bottom panel with 12mm thick laminated novapan and top panel with 5.5mm thick plain glass fixed with snap beading rubber of suitable size complete all as specified & as directed.

S&F PVC cabinet & cupboard shutters in required Sizes with locking arrangement & magnetic catchers in each cupboard at site, made out of 18mm Thick One Side Decorative Lamination & Other Side Balancing Lamination Sheet Consisting of Carcass 18 mm Thick PVC Sheet & Provision of Shutters Made Out of 18 mmThick One Side Decorative Laminated PVC Sheet all required Brackets 5.5 Screws etc. The Panels Shall be fabricated using adhesive and Screws Where ever Required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish as per make and Specification Mentioned as per drawing and Specification including dismantling of existing cabinet & cupboard shutters of any description complete all as specified & as directed. Make: Rajshree/Sintex)

S & F in repair brass Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified & as directed.

S&F in repair 100mm size extruded brass handles, fabricated type polished complete all as specified & as directed.

M & L for applying two coats of plastic emulsion paint of approved tint, over and including a coat of primer, over & including 3mm thick wall care putty on existing plastered surfaces including complete removal of existing treatment complete all as specified and as directed.

M&L for scraping and cleaning of Wooden doors / wall panelling to remove existing polish, filling putty or the required hardeners for repairing of any wooden marks, scratches or scars and treating with putty /primer to obtained similar texture and melamine coating on the surface with approved shade and make (MRF, Berger, Asian) on the surface doors to obtain smooth and uniform looking complete all as specified and as directed.

SETHI ENTERPRISES

M/S ANIL KUMAR

VINAY ENTERPRISES

JIWAN DASS THAREJA AND SONS

M/S GEETANJALI ENTERPRISES

Shri Radhakrishna Associates