REPAIR/ MAINT OF OTM ACCN OF CCCIU CCSR CCSR OFFRS MESS HQ CELZ 71 MTN BDE SIG COY AGE B/R II ECHS REGIONAL CENTRE 71 MTN BDE MARG FIU COMD CANTEEN AGE E/M IN ZONE D AREA OF AGE B/R II UNDER GE (WEST) LUCKNOW

Amount

Demolition of brick work built in cement mortar including precast concrete articles complete all as specified and as directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and as directed.

M&L for with fly ash bricks, old size, straight or curved on plan to any radius in half brick walls built in cement mortar 1:4 complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick wall or concrete surfaces in CM 1:6 including finishing the surface even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar 1:6 on brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling including three coat of white wash finishing the surface even and fair including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and as directed.

Complete removal of existing treatment of wall ( any number of layers ) complete all as specified and as directed.

M & L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete all as specified and as directed

M&L 1 mm thick Birla white putty on wall (two or more coats) complete all as specified and as directed

M&L for preparation of old surface of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L preparation of new plastered surface of walls and applying two coat of cement based paint over cement primer complete all as specified and as directed.

M & L for preparation of old plastered ceiling surface and applying Two coats of white wash complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of wall and applying one coat of white wash complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and as directed.

M&L pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including dismantling asbestos cement ridge complete all as specified and as directed. complete all as specified and as directed.

Dismantling of framed work of timber scantlings 40 sq cm and over in section, in any position complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

M&L structural Steel work in tubular trusses trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections ) including distance pieces, cleats etc. conforming to Fe-410-W(Gde.E-250) quality-B including special shaped washer etc complete using one or more tubes or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete all as specified and as directed.

M&L mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolts n. exc. 5cm long complete all as specified and as directed.

S&F 5mm thick Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet incluseive of solvent cement and fixing at site on PVC frame as per specifications and drawing including taking down wall panelling and similar work complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and as directed.

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and as directed.

M&L for joint free glazed coloured DIGITAL GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick/300 x 600 x 7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and dismantling of existing tiles complete all as specified and as directed.

S&F vitrified tiles, coloured, superior quality 08 to 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 and dismantling of existing tiles complete all as specified and as directed.

S&F vitrified tiles, coloured, superior quality 08 to 10mm thick (square/ rectangular) polished, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 and dismantling of existing tiles complete all as specified and as directed.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including moulding, dismantling of existing stone slabsetc complete all as specified and as directed..

Labour only rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situations complete all as speciifed and as directed.

M&L for machine cut kota stone slab as in flooring 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes including dismantling of existing stone slabs complete all as specified and as directed

M&L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix stone including dismantling of existing stone slabs complete all as specified and as directed.

S&F in repair suspended false ceiling with "E" Board / V-Board grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2 x 2mm (cross ) dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface r complete all as specified and as directed.

S&F in repair Gypsum Board 12mm thick , white prelaminated sett embossed reinforced designer ceiling boards of approved texture at all height laid on hot dipped GI imposed grid with 24mm wide T sec exposed flanges which shall be pestered coated white. The frame work shall comprise of main runner made from 0.33 mm thick GI sheet of size 24x32x300mm and spaced at 1200 mm C/C securely fixed to the structural soffits by approved hangers at 1200mm c/c. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, screw etc. The last hanger at the end if each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runner at 600mm C/C to form 1200x 600 mm modules cross tee longer than 600mm to be supported independently 1200x600 dodules formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be made of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturers instructions and applying two coat of oil bound distemper over a coat of wall care putty complete all as specified and as directed.

Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site complete all as specified and as directed.

Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site complete all as specified and as directed.

S & F GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and as directed

S & F GI tubing 20mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and as directed.

Refixing 15mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and as directed.

Refixing 20mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and as directed.

M & L for cutting and chaseing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and as directed

S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and as directed.

S&F in repair Pillar taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including all accessories complete all as specified and as directed.

S&F in repair angle valves 15mm bore, half/quarter turn, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repair sink with drainage board size 1145x510 mm,bowl size 560x410x200 mm made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc including bedding including cement mortar, dwarf wall or cantilever brackets and connection union to pipe all as specified and as directed

S & F in repair stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel of size 900 x750x250mm including screws and weight not less than 5.00 Kg complete all as specified and as directed.

S&F in repair 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and as directed.

S&F in repair PVC low level white flushing cistern ISI Mark valveless syphonic action dule type with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend complete all as specified and as directed.

S&F in repair brass chromium plated overhead shower rose with arms, 100mm dia, round shape, single flow, fancy type, suitable for 15mm bore pipe and fixed complete all as specified and as directed.

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and as directed.

M & L Welding in repairs n. exc 2.5 cm in length, thickness of metal to be welded n. exc 6mm complete all as specified and as directed.

S&F in repair toilet paper holder, superior quality, fancy type, brass chromium plated with flap complete all as specified and as directed.

S&F in repair hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and as directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and as directed.

S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, with plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated hinging deviceincluding connection to drain pipe (or outgoing pipe) and to flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repair Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and as directed.

S & F in Repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) basin only including connections to flushing pipe and outgoing pipes, spreader fixed in repairs complete all as specified and as directed.

S&F in repair ball Float valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and as directed.

S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank complete all as directed

S&F in position rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank complete all as directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and as directed.

Taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm each complete all as specified and as directed.

Supply and fixing Pressed steel frames of size 105 x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,and fixed complete all as specified and as directed.

Supply and fixing Pressed steel frames of size 125 x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,and fixed complete all as specified and as directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, benching, copings, padding, kneelers, bed blocks, hold fast filling in door frame and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.

M&L mild steel work as in bands, straps, supports or clamps; hold fasts; wall ties; and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and as directed.

M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and as directed.

Supply and fixed 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded, fitted without sash barss all as specified.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100mm x 8 mm sheet metal CSK screws complete all as specified and as shown on drawing ( Note :- Door frame shall be water proof , termite proof elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and as directed.

S&F Solid PVC extruded profile door shutter of 28 mm thick rails and stiles of extruded 71 x 14 mm wide, made of solid PVC extruded profille with a fine homogeneous cellular structure having smooth surface. 5 mm thick PVC foam sheet is laminated on both side with 25 mm rigid PVC sheet) PVC sheet is used as panel. Primeredd MS frame of size 40mm x 20mm is provided for extra strength PVC panel, stiles rails are joined together using solvent cement adhesive. All corners of PVC profile are first mitre cut and then fusion welded complete all as specified and directed

Taking down & refixing Aluminium Door/window shutters of any description exc 1sqm and n exc 2 Sqm in the same opening after making change un serviceable fitting and make good in all respect complete all as specified and as directed.

Taking down & refixing shutters of any description exc 1sqm and n exc 2 Sqm in the same opening after making un serviceable fitting and making good complete all as specified and as directed.

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 110 x 45 mm & sash 40 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension comprising of UPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and as directed by Engineer-in-Charge complete all as specified and as directed. (Note-1. Glazed shutters float glass thickness not less than 5.00 mm and wire mesh shutter with Stainless steel (SS-304) wire mesh 0.36 mm dia with aparture 1.4mm shall also be deemed included in quoted rates and No extra payment will be made separalely 2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 100mm size stainless steel, butt hinges, medium weight and fixed with screws complete all as specified and as directed.

S&F 100mm size butt hinges, medium weight, cold rolled, mild steel and fixed with screws complete all as specified and as directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F in repair 32 mm bore Brass chromium plated Waste coupling for wash basin/urinal etc. with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and as directed.

S & F in repair 40 mm bore Brass chromium plated Waste coupling for kitchen sink with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and as directed.

S&F in repair 25mm dia stainless steel curtain rod, superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and as directed.

S&F in repair stainless steel grating doom 100mm dia complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and as directed.

S&F in repair 0.36 mm dia stainless steel grade 304 wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and as directed.

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long ,including demolition of cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and as directed

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc.including demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and as directed

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in with grey cement & no pigments over Screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1: 4 for laying floor finishes complete all as specified and as directed.

M & L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping incl necessary form work finished even & smooth with using pigment in cement including demolition Cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes and below or above ground levelcomplete all as specified and as directed

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc exc 250 & n.exc 500 ltrs capacity complete all as specified and as directed.

M&L for Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,ength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

M/s Sachkhand Traders

M/s Bhadoria Associates

M/s Chandra Mohan and Sons

RAJEEV AND ASSOCIATES

EVEREST CONSTRUCTION

M/S SWATI CONSTRUCTION