Loading
Loading…
Loading…
Tender Value
₹3.0 L
EMD Value
₹6,100
Closing Date
22 Jun 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECTG
57 conditions · 13 needing a document upload
Whether Document verification certificate as per standard format uploaded
Whether electrical contractor's license, supervisor's license along with PAN Card of both contractor and supervisor uploaded.
Whether documents related to all mandatory requirements as mentioned in Clause no 5 & 6 of GCC part -I, Clause no 10, 11, 14, 15 & 16 of tender form 2nd sheet have been full filled and uploaded.
Whether documents relating to exemption of payment of EMD enclosed
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer should upload copy of the following documents self-attested / digitally signed by the tenderer or authorized representative of the tendering firm along with the tender. Tenderer(s) can use Standard formats available in the tender documents.
The list of personnel / organization on hand and proposed to be engaged for the tendered work. (Please refer Para-11(iii) of tender form 2nd sheet). Standard format attached as form no.5 in tender documents.
The list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (Please refer Para- 11(iii) of tender form 2nd sheet).
The tenderer should upload the supportive documents against the i)'Type of Firm' as mentioned below: *Sole Proprietorship firm: Notarized affidavit claiming the firm to be a sole proprietor firm * Company: MOA, AOA, Power of Attorney, *Partnership Firm: Deed of Partnership, POA and ii) an undertaking for not being Blacklisted / debarred as per Annexure-A. NOTE: In case of partnership firm, they should submit individual declaration of all partners not being Blacklisted / Debarred as per Annexure-A, otherwise the offer of the tenderer will be summarily rejected.
Each partner of the partnership firm should duly submit the filled in Annexure-V separately as per IRGCC-2022; Otherwise, the offer of the tenderer will be summarily rejected. Firms other than the partnership firm have to submit it as before.
Please upload certificate (Annexure - V(A)) and is to be given by attorney/authorized signatory/ each member of Partnership firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc).
The tenderer should upload Declaration regarding "Employment / partnership etc. of Retired Railway Employees" (please refer to Para 16(a) of tender form 2nd sheet). (Use standard "Form no. 2", available in tender booklet).
The tenderer has to upload Declaration regarding relation with any Railway Employees. (Please refer to Para 16 (c) of tender form 2nd sheet). (Use standard "Form no. 6", available in tender booklet).
Should a tenderer or contractor being an individual, have member(s) of his family or in the case of partnership firm / Company / Joint Venture(JV) / registered Society / registered trust etc. one or more of his partner(s) / share holder(s) or member (s) of the family of patterner(s) / share holder (s) having share of more than 1 % in the tendering entity employed in gazetted capacity in the engineering or any other department of the Railway, then the tenderer at the time of submission of tender, will inform the authority inviting tenders the details of such persons.
The tenderer should upload certificate of familiarization as per Chapter -4. (Use standard "Form no. 7", available in tender booklet).
The tenderer should upload GST registration certificate and PAN card.
For all tenders having advertised cost of Rs. 10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter or credit (LC arrangement. The tenderer shall affirm having read over and agreed to the terms and condition of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, therafter, during execution of contract (The tenderer have to submit the option take payment fro Railway through a Letter of Credit arrangement).
The tenderer should upload the bank details i.e. Name of Bank along with Bank Branch Code, Account Number as appearing in the cheque book, IFSC Code and PAN Number, dully certified by the Authorized official of of the bank to facilitate payment through ECS/NEFT/RTGS. In lieu of the bank certificate photocopy /scanned copy of a cancelled cheque and PAN card may be attached for verification of the above particular, otherwise the offer of the tenderer will be summarily rejected.
ELECTRICAL WORKS IN CONNECTION WITH PROVISION OF INTERMEDIATE BLOCK SIGNALING BETWEEN LAPANGA-RENGALIIN JSG-SBP BG DOUBLE LINE ELECTRIFIED SECTION.
SBP-ELECT-2026-T-283~ECOR
SBP-ELECT-2026-T-283
Open
Works - General
6 Months
Sambalpur, Odisha
₹0
₹6,100
22 Jun 2026
29 May 2026
8 Jun 2026
61 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,02,222.31 | ||
| — | 10.00 | — | — | ||
| Concealed point wiring for Light/ Fan/ Exhaust Fan/Call Bell/ Points by 1.5 sq mm FRLS copper wire with flush type switches through PVC pipe with supply of all materials. | — | — | — | 4,482.7 | |
| — | 4.00 | — | — | ||
| Concealed wiring of socket points 5/3 pin 6 amp with copper wire and flush type switch and socket with supply of all materials. | — | — | — | 468.16 | |
| — | 2.00 | — | — | ||
| Concealed wiring of socket point 5/3 pin 16 amp with copper wire and flush type switch and socket with supply of all materials. | — | — | — | 718.18 | |
| — | 40.00 | — | — | ||
| Concealed wiring of sub main with 2x4) sq.mm +1x2.5 sq mm PVC Cu. FRLS Wire with supply of all materials. | — | — | — | 4,830.4 | |
| — | 30.00 | — | — | ||
| Concealed wiring of sub main with 2x6 sq.mm+1x2.5 sqmm PVC Cu. FRLS wire with supply of all materials. | — | — | — | 5,086.2 | |
| — | 2.00 | — | — | ||
| Supply of 1200 mm sweep. energy efficient ceiling fan with BLDC motorsuitable for operation in 140-270V, AC, 50 Hz. AC supply. | — | — | — | 4,857.06 | |
| — | 2.00 | — | — | ||
| Fixing testing of BLDC ceiling fan. | — | — | — | 88.3 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing &commissioning of 4 Way sheet metallic enclosure for MCB fitted with Din Rail. | — | — | — | 668.1 | |
| — | 2.00 | — | — | ||
| Supply & erection of 2Way sheet metallic enclosure for MCB fitted with DIN Rail. | — | — | — | 662.48 | |
| — | 3.00 | — | — | ||
| Supply & erection of 6-32Amp MCB SP,10KA C Curve | — | — | — | 713.97 | |
| — | 4.00 | — | — | ||
| Erection, testing & commissioning of MCBs. | — | — | — | 29.52 | |
| — | 2.00 | — | — | ||
| Supply of ISI marked 40AMP, MCB DP, C curve, | — | — | — | 1,710 | |
| — | 2.00 | — | — | ||
| Supply of ISI marked 63AMP, MCB DP, C curve, | — | — | — | 1,928.48 | |
| — | 1.00 | — | — | ||
| Supply of 300 mm Exhaust fan, 230V, AC, 50 Hz. | — | — | — | 1,790.49 | |
| — | 1.00 | — | — | ||
| Erection, testing and commissioning of Exhaust fan. | — | — | — | 214.93 | |
| — | 4.00 | — | — | ||
| Supply of 20 W, LED type tube light fitting as per CEE/ECoR's specification. | — | — | — | 1,174.32 | |
| — | 6.00 | — | — | ||
| Erection of LED type tube light fitting/ Bulkhead fitting | — | — | — | 298.74 | |
| — | 2.00 | — | — | ||
| Supply of LED bulkhead fittings complete | — | — | — | 1,879.82 | |
| — | 750.00 | — | — | ||
| Supplying and laying of 63 mm dia (OD-63mm & ID-51 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required | — | — | — | 1,38,112.5 | |
| — | 60.00 | — | — | ||
| Laying of single cable across the road/track as per Railway appd drawing. | — | — | — | 28,213.8 | |
| — | 2.00 | — | — | ||
| Construction of cable trench (0.45x0.45 mtr) with bricks, filling of sands and fixing of RCC slab (3") over the cable trench & laying of cable inside it. | — | — | — | 3,297.86 | |
| — | 800.00 | — | — | ||
| Fixing of Railway supplied cable in open air/on wall/pole /GI Pipe/Culvert/HDPE Pipe etc as advised by Railway. | — | — | — | 22,224 | |
| — | 20.00 | — | — | ||
| Supply & fixing of 50 mm inner dia(medium grade) GI pipe | — | — | — | 8,748.8 | |
| — | 4.00 | — | — | ||
| Provision of G.I pipe earthing as per CEE/ECoR's approved drawing. | — | — | — | 12,103.92 | |
| — | 1.00 | — | — | ||
| Supply of control and distribution panel for CLS supply of 60A, 10 kVA, AT as per RDSO Spec. No. TI/SPC/PSI/ CLS / 0022 and as per CORE approved latest drawing No. JPE-041-1 sheet 1&2 | — | — | — | 38,817.67 | |
| — | 1.00 | — | — | ||
| Erection, testing and commissioning of CLS panel. | — | — | — | 690.99 | |
| — | 2.00 | — | — | ||
| Supply & fixing of Junction Box comprising 2 nos 60Amp Copper Bus bar & 1 no 63Amp MCB DP,10KA | — | — | — | 4,420 | |
| — | 20.00 | — | — | ||
| Supplying and making cable route marker with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required | — | — | — | 8,995.4 | |
| — | 2.00 | — | — | ||
| Supply of 45-Watt LED outdoor fitting | — | — | — | 4,436.96 | |
| — | 2.00 | — | — | ||
| Erection, testing& commissioning of LED outdoor fitting | — | — | — | 558.56 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .