Construction of Prefabricated/ Pre-engineered PORTA cabin on EPC (Engineering Procurement and Construction) basis at central Jail Arraria for the Year 2026-27 Gr03

Civil work will consist of RCC footing under each column location and plinth beam to tie the footing as per the drawing attached. Civil work in foundation should be based on vetted design as per architectural drawing & approved site (Considering earthquake forces and wind pressure for the particular site) All RCC works shall be of minimum M25 grade and steel reinforcement shall be of Fe 500 grade of SAIL, TATA, VIZAG STEEL, SHYAM STEEL.

Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 800-1984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/ slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above.

Resin Bonded Slab Rockwool 48 kg/m3, 50 MM THK

Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.

Color coated trapezoidal ‘’ LYSAGHT TRIMDEK 1072’’Profile sheet manufactured with nominal 1072 mm supply width nominal 28 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm center to- center.The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of. ZINCALUME® steel resin coated, minimum metallic coating mass is AZ150 (150g/m²), minimum yield strengths of G550 (550MPa) complies with AS1397 or IS15961.COLORBOND® XRW is pre-painted steel for exterior roofing and walling metal Thickness (0. 50 TPT), Hi-Tensile steel with min.550 MPa yield strength, metallic hot dip coated with Aluminum-Zinc alloy(55% Aluminum, 45% Zinc as per AS 1397 - Zincalume® with Super Durable Polyester exterior paint system, total 25um DFT on topside and 10um DFT on reverse side complying with AS/NZS 2728- type 4 or IS15965- class 3 COLORBOND® Ultra is pre-painted steel for severe coastal or industrial environments (closer to source),SuperDurable Polyester exterior paint system, total 25um DFT on topside and 15um DFT on reverse side complying with AS/NZS 2728- type 4 or IS15965- class 3 All types of flashings & Gutter as required.

Color coated trapezoidal ‘’ LYSAGHT TRIMDEK 1072 / Panel rib ’’Profile sheet manufactured with nominal 1072 mm supply width nominal 28 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm center to- center.The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of. ZINCALUME® steel resin coated, minimum metallic coating mass is AZ150 (150g/m²), minimum yield strengths of G550 (550MPa) complies with AS1397 or IS15961.COLORBOND® XRW is pre-painted steel for exterior roofing and walling metal Thickness (0. 50 TPT), Hi-Tensile steel with min.550 MPa yield strength, metallic hot dip coated with Aluminum-Zinc alloy(55% Aluminum, 45% Zinc as per AS 1397 - Zincalume® with Super Durable Polyester exterior paint system, total 25um DFT on topside and 10um DFT on reverse side complying with AS/NZS 2728- type 4 or IS15965- class 3 COLORBOND® Ultra is pre-painted steel for severe coastal or industrial environments (closer to source),SuperDurable Polyester exterior paint system, total 25um DFT on topside and 15um DFT on reverse side complying with AS/NZS 2728- type 4 or IS15965- class 3

It should consist of 600mm X 600mm size vitrified tiles of approved make, Colour & Shade laid over 20mm thick cement mortar (1:4) i/c grouting the joint with white cement and matching pigment etc complete job over 4" P.C.C (M15) over one brick flat soling over compacted local sand filling.

All doors frames are of Steel pressed and shutters are of minimum 35mm thick flush door shutter with both side teak wood veneer. For Quantity and size Refer Drawing

Providing and fixing of UPVC Glazed Window of sizes as shown in drawing (it shoud be of 3 track with MS jali)having Ashahi/Sant Gobian having 4mm thickness Glass.

Providing and fixing of UPVC Glazed Ventilator of size having Ashahi/Sant Gobian having 4mm thickness Glass.

Applying of 2 coats high grade of paints alogn with Primaer /Putty on Internal wall & False ceiling

Costruction of Septic Tank of size 3.5mx 1.5m x1.5m along with all requrired fittings, fixtures,Connecting sewerline and all complete job .

Water Supply system consisting of 1HP Submersible electrical water pump with electrical panel including cost of boring 100 mm x 50mm x 110 metre and fitting with a plain G.I. Pipe 1.25 metre at the end and 1,000 litres capacity PVC water storage tank distributed through CPVC pipes & fittings and accessories like CP brass bib Cock, stop Cock, Pillar Cock etc of high quality make like Jaquar/marc/Johnson as per drawing & specification of E/I. (Arrangement of keeping storage tank should be made saperately at suiable place by using steel framing of ht not less than 5.0m)

Sanitation system should consist of hand wash basin with pedestal, IWC, EWC, URINAL, SINK & required facilities as directed by E/I of white vitreous china clay of approved size and make like Hindware, Parryware, Cerra. (All fitting must be as approved by E/I.)

Adequate pipe line & chambers for disposal of household water, sanitation water & storm water should be provided.

Provision of fire extinguisher of sufficient system as per area requirement & slandered make. (dry system)

Providing and fixing of internal and external electrical wiring and fittings with modular switches of make such as Havels/Finolex/ Anchor/Philips. Providing and fixing Wall Mounted Fans& led light as per requirement shown in drawing.Also providing LAN as per requirement of counters with all necessary accessories (All fitting must be as approved by E/I.)

Providing and Installation office table 1800mmx900mmx730mm approved Brand Etc... do all complete job as per building specification and direction of E/I.

Internal PCC (1:1.5:3) Approach road as Required Minimum Thickness 150mm over Brick on Edge Soling over brick flat soling 75 mm over local sand filling

Required Parameters

Latest Digital Signal Processor based Pulse

6 Zone with capability of showing location of

Should detect

DFMD should have multi-zone capability with

Performance of the DFMD should be

An LED indicating Green / Red status of the

The detector must provide audio and visual

Should not interface with adjacent installed

Inbuilt auto calibration controlled with

At least 25 people per minute.

100~240VAC along with in built Re-

Easily accessible, modular design with standard

The firm should provide DFMD as per NIJ Standard

Height Not Less than 200 cm

At least -10°C to 55°C (Humidity 95%)

Should meet all International safety standards,

The firm should provide the following, as

OEM Service Center in Bihar is mandatory

Min 2 Hours, at least 4 times in a year during

No false Alarm.

Required Parameters

Pulse Induction Technique

Should detect:-

Should be able to detect following objects from the given distances:-

Distance

Highly super sensitive device for deep anatomy detection.

Non-interference recorded materials

Continuous Audio alarm with fixed tone or

For power ON/OFF, visible indication for

Should operate on in built re-chargeable

Shock resistant, Separate automatic switching

Switches for ON/OFF, Low and High

Should be Elegant, Robust and Ergonomic

Should not be more than 500 gm. including

At least -5°C to 55°C (Humidity 90%)

Should meet International/National standards

The firm should provide HHMD the as per NIJ Standard

Certificate to be provided from any

OEM Service Center in Bihar is mandatory

The firm should provide user hand book and

Should be less than 3%