Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.2 LAccepted-AOC NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L1 | Accepted-AOC DUE TO QUOTED RATE IS L1 | |
| 2 | L2₹11.1 L+₹89,413.90 (8.74%)Rejected-Finance AT ROAD NEAR RENUKA CINEMA P O DIST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance DUE TO QUOTED RATE IS HIGH |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
27 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
GE LEKHAPANI, TINSUKIA, ASSAM
REPAIR MAINT OF PUMP, MOTOR AND MISC WKS, CLEANING OF SEDIMENTATION TANK UG SUMP, OHT AT WATER SUPPLY INSTALLATION AT MIL STN LEKHAPANI
2022_MES_564367_3
8708/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E Cat b (I)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹20,000
Yes
10 Mar 2023
1 Feb 2023
4 Mar 2023
1 Feb 2023
27 Feb 2023
8 Feb 2023
Amount
M&L for taking out old unserviceable burnt out electric monoblock motor with pump from the foundation of pump capacity 10 HP , 440 Volts, 50 Hz by opening/disconnecting all mechanical and electrical connections and transporting to nearest work shop and rewinding the same by using approved make super enamelled insulation copper wire of suitable insulation class of approriate size after pulling out burnt out copper wires from the slots of startor including replacement of minor accessories like mica paper, sleeves, glass fibre, bamboo pieces etc. including varnishing/heating at heat chamber suitably and opening the monoblock pump assembly for replacement of unserviceable parts, servicing by grease , maintenance and reassembling all as per existing complete and taking back the whole pump sets to its original location and fixed or placed suitably including making the electrical and pipe connections including testing to get satisfactory result complete all as specified and as directed. Note: (i) Parts if required for pump shall be measured and paid separately here-in-after under another item as 'supply only'.(ii) Work for rethreading/grinding/metal surfacing and fabrication works to pump or rotor shaft shall be measured & paid separately under separate items here-in-after.
All as per item No.1 above, but Pump set of capacity 20HP.
M&L for opening or pulling the worn out rotor shaft of electric motor/pump of capacity 10 HP from the pump set by removing all connected nuts, bolts, bearing covers, cooling fan and bearing etc. and same is brought to nearby metalling shop for remetalling of surface/re-threading/grinding and fabrication job on shaft and servicing of monoblock pump by providing gland packing and grease of approved grade suitably and re-fitting properly to their original location as per direction of Engr-in-charge complete all as specifed and directed. Note:- Spare parts shall be measured and paid separately under relevant items.
All as per item No.3 above but for pump set of capacity 20 HP.
Supply only single metal impeller for 10 HP monoblock pump set as per existing model KDS-1040+ and make of kirloskar complete all as specified and directed.
Supply only single metal impeller for 20 HP monoblock pump set as per existing model KDS-2050+ and make of kirloskar complete all as specified and directed.
Supply only double metal impeller for 20 HP monoblock pump set as per existing model KDT-2070+ and make of kirloskar complete all as specified and directed.
Supply only ball bearing of 6308 as per existing model and make complete all as specified and directed.
Supply only ball bearing of 6307 as per existing model and make complete all as specified and directed.
Supply only pump shaft of 10 HP as per existing model and make of kirloskar complete all as specified and directed.
Supply only pump shaft of 20 HP as per existing model and make of kirloskar complete all as specified and directed.
Supply only cooling fan of model M 132 for 10 - 20 HP as per existing model and make complete all as specified and directed.
Supply only mounting casing for Model KDS-1040+ of 10 HP monoblock pump as per existing model and make complete all as specified and directed.
Supply only mounting casing for Model KDS-2050+/KDT-2070+ of 15/20 HP monoblock pump as per existing model and make complete all as specified and directed.
M&L for Taking up electric driven submersible motor & pump set of capacity 7.5 to 15 HP from bore well complete with column pipe upto submersible depth by using chain pulley and allied T&P required and taking to the work shop for repair and lowering the same after repair in the existing bore well, making all the electrical connections including commissioning, testing complete on full load to the entire satisfaction of Engr-in-charge.
Dismantling all the parts of submersible pumps set complete with submersible motor, 3 phase 50 hz, 415 volts AC, of capacity 7.5 HP to 15 HP capacity, checking all parts, segragating the serviceable parts for reuse, removing the defective parts and repair the same (as describe below)including re-assembling, connections and testing complete all as specified and directed by Engr-in-charge. (a) Cutting the burnt out winding and cleaning of moving parts properly using petrol/suitable solvent and re-winding the complete stator winding with approved identical gauge and length of PVC insulated copper wire suitable for submersible motor rewinding including connected works complete to the entire satisfaction of Engr-in-charge. (b) Repair the motor shaft assembly by welding, cutting, grinding and polishing etc complete all as specified and directed. Note: Spare required shall be measured and paid as 'supply only' rate under relevant items of this schedule).
Supply only thrust bearing complete all as specified and as directed.
Supply only thrust plate complete all as specified and as directed
Supply only stainless steel sand guard for 15 HP submersible pump complete all as specified and as directed.
Supply only motor bush complete all as specified and as directed.
Supply only shaft sleeve set complete all as specified and as directed.
Supply only pump shaft made out of high strength steel material suitable for 15 HP submersible pump set as per existing model and make complete all as specified and as directed.
Supply only rubber bush suitable for casing of pump complete all as specified and as directed.
Supply only sleeve for electric motor complete all as specified and as directed.
Supply and fixing water pressure gauge 4" dial 0 TO 14 Kg/Sq cm including clamps, nuts, bolts and washers complete all as specified and as directed..
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing debris to the premises complete all as specified and directed.
M&L PCC (1:2:4), type B-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc including necessary form workcomplete all as specified and directed.
S&F Mild steel work such as channel 100 x 50 x 6mm size using in foundations,etc including suitable size of nut & bolts etc, for alignment of pump set complete all as specified and directed.
M&L for MCCB 3 pole, 415 volt, fixed type 100 amps with breaking capacity of 16KA complete all as specified and as directed.
M&L for MCCB 3 pole, 415 volt, fixed type 125 amps with breaking capacity of 16KA complete all as specified and as directed.
S&F Fully automatic star delta starter sheet metal enclosure MU-G15 suitable for 20 HP, 440 volt, 3 Ph Elect Motor with Single Phase Protection and motor protection relay feature conforming to IS -13947 after taking down old unserviceable one and fixed to the same location by making electrical connection properly complete all as specified and as directed.
All as per item No.31 above,but for eletrical motor 10 HP, complete all as specified and as directed.
Dismantling and removing burnt out contactor and S&F Contactor 3-Pole with AC Coil, 415 Volt, 50 Hz, Type- CN3 25 T1 as per existing model and make complete all as specified and as directed.
Dismantling and removing burnt out contactor and S&F Contactor 3-Pole with AC Coil, 415 Volt, 50 Hz, Type- CN4 32 as per existing model and make complete all as specified and as directed.
Disconnecting of unserviceable submersible cable, and S&F with new 6 Sqmm Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors, 1100 Volts conforming to IS: 694 including lugs/washer at location as and when directed by Engr-in-charge complete all as specified and directed.
S&F Cheminject chemical dozing pump capacity 6 lph/10 kgs back pressure including all accessories like foot valve ,IRV, suction/discharge tube including taking down old complete all as specified and directed.
M&L for cleaning and removing all scales,silts,mud and dust, dirts etc. from RCC service water tank manually and cleaning, scraping inner surfaces of tank by means of wire brush and then washing with clean water and cleaning of mouths of circulating pipes etc. and thoroughly washed with clean water of capacity of tank exceeding 500 litres but not exceeding 1000 litres including writing date of cleaning on outer body of the tank with 100mm high by synthetic enamel paint (white/black colour),supply and fixing air vent pipe to the tank(connecting with tee and joining two feet gi pipe of medium grade above the outlet pipe from the tank) complete all as specified and directed.
All as per Serial item No. 37 above, but capacity of RCC water tank exceeding 1000 litres but not exceeding 2000 litres.
M&L for cleaning and removing all scales,silts,mud and dust, dirts etc. from PVC service water tank manually and cleaning, scraping inner surfaces of tank by means of soft brush and then washing with clean water and cleaning of mouths of circulating pipes etc.of capacity of tank exceeding 500 litres but not exceeding 1000 litres including writing date of cleaning on outer body of the tank with 100mm high by synthetic enamel paint (white/black colour) supply and fixing air vent pipe to the tank(connecting with tee and joining two feet gi pipe of medium grade of dia 20 mm above the outlet pipe from the tank) complete all as specified and directed.
All as per Serial item No.39 above, but capacity of PVC water tank exceeding 250 litres but not exceeding 500 litres capacity.
Collecting water sample in clean bottle from location as directed for testing of physical test, chemical test, as per IS-10500-1991 from NEIST JORHAT or any government recognized institute and submitting test report complete. (Note : Test will be conducted at the interval of 3 months)
M&L for cleaning/washing sedimentation tank of capacity 25000 Gallons by making preparatory arrangement and taking out deposited sludge, soil etc., from the bottom including cleaning inside walls with steel wire brush, gunny bags, etc and washing/cleaning and removing sludge, soils etc to a distance not exceeding 50 metre from the pump house campus area, and deposited where directed complete including writting the words "Date Cleaned on" on the Front/Road side face complete all as specified and as directed.
All as per item No 42 above,but cleaning water Storage tank of Capacity 10000 Gallons, complete all as specified and as directed..
M&L for cleaning/washing of Ground level storage sump of 20000 gallons capacity after complete pumping out of water from the static tank (Pumpset is own arrangement of the contractor) and removing all dirts/sludge by scraping with steel wire brush/ gunny bags cleaning/ washing thoroughly floor and inner walls with bleaching powder solution and removing sludge/soils etc., to a distance not exceeding 50 metre from pump house campus, including writting the words "Date Cleaned on" on the Front/Road side face complete all as specified and as directed.
M&L for cleaning/washing of Ground level storage sump of 25000 gallons capacity after complete pumping out of water from the static tank (Pumpset is own arrangement of the contractor) and removing all dirts/sludge by scraping with steel wire brush/ gunny bags cleaning/ washing thoroughly floor and inner walls with bleaching powder solution and removing sludge/soils etc., to a distance not exceeding 50 metre from pump house campus, including writting the words "Date Cleaned on" on the Front/Road side face complete all as specified and as directed.
Material & Labour for cleaning/washing pressed steel Overhead Tank 9600 gallons capacity, 12.00 meter high staging after complete dewatering and removal of all dirts/ sludge by scraping with steel wire brush/ gunny bags, washing thoroughly floor and inner walls and draining/ washed out before fresh water filled including writting the words "Date Cleaned on" on the Front/Road side face of pressed steel OH Tank including necessary scaffolding works complete all as specified and as directed.
All as per item No.46 above, but pressed steel Overhead tank 50000 Gallons capacity 12.00 mtr high staging.
M&L cleaning & washing of JACK WELL of dia 4.60 metre and depth 10 meter by making preparatory arrangement and taking out deposited sludge, soils etc from the bottom including cleaning inside walls with steel wire brush, gunny bags, etc and washing/ cleaning and removing sludge, soil, etc., to a distance not exceeding 50 meter from the pump house campus and deposited where directed complete including writing the words "Date Cleaned on" on the Front/Road side face all as specified and as directed.
M&L for cleaning/washing of RCC Overhead Tank 50000 Gallon capacity, 50 feet high staging after complete dewatering and removal of all dirts/sludge by scraping with steel wire brush/gunny bags, cleaning/washing thoroughly floor and inner walls with bleaching powder solution and drained/washed out including necessary scaffolding works including writting the words "Date Cleaned on" on the Front/Road side face complete all as specified and as directed. Note For Item Nos : 1.00 to 8.00:(a) Materials and sundries items etc. required for cleaning shall be arranged by the contractor from his own sources and cost for the same shall deem to be included in the unit rate. (b) Cleaning shall be carried out as required and directed with all arrangments as requered so as to complete the work in time to avoid disturbance in water pumping system.
M&L for cleaning/washing of Ground level storage sump of 50000 gallons capacity after complete pumping out of water from the static tank (Pumpset is own arrangement of the contractor) and removing all dirts/sludge by scraping with steel wire brush/ gunny bags cleaning/ washing thoroughly floor and inner walls with bleaching powder solution and removing sludge/soils etc., to a distance not exceeding 50 metre from pump house campus, including writting the words "Date Cleaned on" on the Front/Road side face complete all as specified and as directed.
Taking out from trenches or taking down from wall GI steel tubing and connections, 20 mm bore, setting aside and cleaning the serviceable pipe for re-laying/ re-fixing or removal of unserviceable pipe from site of work complete all as directed.
Re-fixing/ Re-laying of old serviceable GI pipes 20 mm bore , obtained from taking out here-in-before, with all new fittings and laid in trenches/wall complete all as specified and as directed
S&F 20 mm bore GI tubing, medium grade with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.
Taking out from trenches or taking down from wall GI steel tubing and connections, 25 mm bore, setting aside and cleaning the serviceable pipe for re-laying/ re-fixing or removal of unserviceable pipe from site of work complete all as directed.
Re-fixing/ Re-laying of old serviceable GI pipes 25 mm bore , obtained from taking out here-in-before, with all new fittings and laid in trenches/wall complete all as specified and as directed
S&F 25 mm bore GI tubing, medium grade with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.
S&F Gun metal, gate valves, with iron wheel head, suitable for 20mm bore dia of pipes, Screwed both ends for iron pipe or for union including taking out old one complete all as specified and as directed.
S&F Gun metal, gate valves, with iron wheel head, suitable for 25mm bore dia of pipes, Screwed both ends for iron pipe or for union including taking out old one complete all as specified and as directed.
S&F Gun metal, gate valves, with iron wheel head, suitable for 15 mm bore dia of pipes, Screwed both ends for iron pipe or for union including taking out old one complete all as specified and as directed.
S&F in Repair to water level indicator of OH Reservoir by replacement of PVC float ball , mild steel pulley and flexible steel wire rope from float ball to measuring key and painting to indicator with 2 coat of synthetic enamel paint and marking number with red/black reflective type colour complete all as specified and as directed.
S&F of 3 Phase Dgitial Panel voltmeter Meter Flush Mounting 96x96mm, Accuracy Class -1 , Input Voltage measurement range 50-520V AC including taking down existing unserviceable one complete all as specified and as directed.
S&F of 3 Phase, 5A, Dgitial Panel Ammeter Flush Mounting 96x96mm, Accuracy Class -1 ,CT/PT Site programmable including taking down existing unserviceable one complete all as specified and as directed.
S & F 3 Phase indicator lamp including taking down existing set complete all as specified and as directed by Engr in Charge.
Repair of Glow sign board of any size, frame at pump house by providing necessary wiring and tube light and clean the same with proper care complete complete all as specified and directed by Engr-in-Charge
S&F in repair single phase preventor relay SPPR type SDz5, SPPR with Timer 360V in Fully automatic star delta starter by expert Electrician in sheet metal enclosure for 10HP/15HP/20HP motor.
Supply only ferric Alum brick as per IS : 299 (Q3) suitable for drinking water purification as specified and directed by Engr-in Charge
S&F 80mm dia mettallic cast iron foot valve at the end of GI pipe/PVC pipe with complete fixing accessories under jackwell/river complete all as specified and directed.
Supply in replacement of gland packing for monoblock motor or sluice valve for any capacity all as directed by Engr-in-Charge
Supply in replacement of lead wool in sluice valve for any capacity all as directed by Engr-in-Charge
STANDARD ELECTRIC WINDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .