Installation and commissioning of lattice mast communication towers, wireless radio bridge antennas, and other necessary equipment at multiple locations, including sidings, check Posts and the new GM Office,

Amount

Providing, commissioning of Self supported Lattiees mast/communication tower 40 feet, Wind speed 0-120 KM/H, Material Q345B/A572, Minimum yield strength>= 345 MPA, Three support legs ,Hot dipped Galvanized withGalvanizedMinimum120um and color painted as per requiredment, galvanised standard ENISO 1461, ASTM/A123,The tower must be capable to sustain wind speed of 120kmph

Providing, commissioning of Self supported Lattiees mast/communication tower 70 feet, Wind speed 0-120 KM/H, Material Q345B/A572, Minimum yield strength>= 345 MPA, Three support legs ,Hot dipped Galvanized with GalvanizedMinimum120um and color painted as per requiredment, galvanised standard ENISO 1461, ASTM/A123,The tower must be capable to sustain wind speed of 120kmph

Providing, commissioning of Self supported Lattiees mast/communication tower 80 feet, Wind speed 0-120 KM/H, Material Q345B/A572, Minimum yield strength>= 345 MPA, Three support legs ,Hot dipped Galvanized withGalvanizedMinimum120um and color painted as per requiredment, galvanised standard ENISO 1461, ASTM/A123,The tower must be capable to sustain wind speed of 120kmph

Self supported Lattiees mast/communication tower 90 feet, Wind speed 0-300 KM/H, Material Q345B/A572, Minimum yield strength>= 345 MPA, Three support legs ,Hot dipped Galvanized with GalvanizedMinimum120um and color painted as per requiredment, galvanised standard ENISO 1461, ASTM/A123, The tower must be capable to sustain wind speed of 120kmph

Self supported Lattiees mast/communication tower 120 feet, Wind speed 0-300 KM/H, Material Q345B/A572, Minimum yield strength>= 345 MPA, Three support legs ,Hot dipped Galvanized with GalvanizedMinimum120um and color painted as per requiredment, galvanised standard ENISO 1461, ASTM/A123, The tower must be capable to sustain wind speed of 120kmph

Providing, commissioning of Self supported Lattiees mast/communication tower 150 feet, Wind speed 0-120 KM/H, Material Q345B/A572, Minimum yield strength>= 345 MPA, Three support legs ,Hot dipped Galvanized withGalvanizedMinimum120um and color painted as per requiredment, galvanised standard ENISO 1461, ASTM/A123, The tower must be capable to sustain wind speed of 120kmph

12u outdoor network rack ; Basic frame: CRCA (MS SHEET) 0.8mm thickness, Construction: Welded,Cooling fans provision on Left and Right side, Plain top with extension on 3 sides (LH, RH & Front), Front plain door with key lock and gasket, 6 Socket PDU (5amp).• Bottom with 2nos. Cable Entry/Exit cut-outs with rubber protection. Wall/Pole mount with brackets, IP55 Rated (Dust proof, Rust proof & Rain water protected),Standard Finish: Power Coated RAL 7035 PP (Light Grey),

Wireless Radio Point to point,Device Interfaces 2 x 100/1000 Mbps Ethernet port, reset button,Security 802.11i 128-bit AES Personal / Enterprise,Surge protection intergrated POE adapter, Material:- Outdoor UV Stabilized Plastic,Antenna Gain -23 dBi,Protection-8KV ESD Protection,4KV Lightening Protection,Wireless Standard-IEEE 802.11 a/n,Enclosure- ABS, IP66 compliant,Firewall-IP / MAC filter,Power Consumption ≤ 15 W,Deployment outdoor ,Maximum Bridging Distance-Up to 20 km,Wireless Speed- Up to 867 Mbps,Operating Temperature: -40ºC to 65ºC,Certifications- CE, FCC,Includes mounting Kit,Wind Survivability- 200 km/h (125 mph)

Supplly of pvc insulated,pvc round sheathed multicore 2.5 sqmm 2 core copper flexible cable

Cat6 Cable ,Mod-Tap/Standard copper Outdoor cable for 1-100 Mhz signaling and normal operating speed 100 mpbs insuring 67 db attenuation 100 Mhz.

Dismantling of 50 feet lattice mast communcation tower

Erection of 50 feet lattice mast Communication tower including foundation work

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc.as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required, 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Foundation for latties mast/ communication tower providing and |laying in position reinforced cement concrete 1:2:4 (I cement: 2 Coarse: 4 stone aggregate 20mm nominal size) in foundation of pumps. Dg set etc, including form work etc ,as required (excluding reinforcement) ( 1X40 feet-1.5 cum, 1X70 feet-2 cum,1X80 feet-2 cum,1X90 feet-2 cum,1X120 feet-3 cum,1X150 feet-5 cum)

Earthing with copper earth plate 600 mmX600mmX3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr. Long etc.with charcoal/coke and salt as required ( Wiring + machine)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required

Providing and fixing copper lighting Arrester

Erection / fixing chages @15% on item no7,8,9,10

Total impact of GST for the purpose of CTC