Repairing and Modification work of District MGNREGS Cell at Howrah Zilla Parishad

Repairing and Modification work of District MGNREGS Cell

Ceiling of masonite board, (i) 4.5mm thick, (a) Ordinary Teak

Wall paneling /partition with Melamine faced 3 layered flat pressed wood particle board, (A) Plain: Conforming to IS: 3087-1985, (i) Plain : Exterior grade, (a) 9 mm thick

Supplying, fitting and fixing boiling water proof ply, In Ground Floor, (ii) 6mm

Partition with soft insulation board of 12 mm thick, In Ground Floor, (a) Ordinary Teak

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987, (xiv) 12mm thick coloured / tinted / toughened glass conforming to IS : 2553-1992 (Part-II)

Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer-in-Charge, (i) 150 mm

Wood work in posts, post plates, rafters, battens. truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.), (iii) Sal :Malayiasian.

Supplying EPDM gusket of approve make and brand as per direction of Engineer in charge. (i) For sliding windows, (a) T shaped EPDM guskets for frames

Supplying EPDM gusket of approve make and brand as per direction of Engineer in charge. (i) For sliding windows, (b) U shaped EPDM guskets for frames

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS 732-1983 and IS: 1285-1975, 15 Micron Colour Annodizing, (i) Mulion & Transom (Weight @1.819 Kg/M)

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS 732-1983 and IS: 1285-1975, 15 Micron Colour Annodizing, (ii) Sub frame for fixing glass (Weight @0.31 Kg/M)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC - In Ground Floor: One Coat, (a) In Ground Floor (one coat)

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer - In Ground floor (Two Coat) : Super Protective 100% Acrylic Emulsion. (a) In Ground Floor (a) Normal Acrylic Emulsion

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary, (a) On steel or other metal surface - With super gloss (hi-gloss) - Two coats (with any shade except white)

Stripping off worn out plaster and raking out joints of walls, ceilings etc. upto any height and inany floor including removing rubbish within a lead of 75m as directed.

Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Suppling, fitting and fixing Wall mounted water closet of white glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (Equivalent to Code No. 20061 or 92065 & Model Studio or Rubbic of Hindware or equivalent.)

Supplying, fitting and fixing concealed cistern of approved make with flash plate Cute/Loop/Shell/Nova (Code No. concealo-H(80mm Body sap code 508179 of Hindware or equivalent).

Supplying fitting & fixing Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.

Supplying fitting & fixing CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No. 5167(B) & Model - FLORENTINE of JAQUAR or similar brand).

Supplying fitting & fixing waste fittings complete, (ii) 32mm C. P. Over Brass

Supplying fitting & fixing CP Wall Mixture without spout but with provision for connection to Telephone Shower and exposed pipe for Overhead shower

Supplying fitting & fixing Chromium plated shower arm 240 mm long (Equivalent to Code No. 536(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting & fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610x390x370 mm having pre & post flushing with water (250 ml & 350 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge.

Supplying fitting & fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(sink with drain board 1050 mm*450 mm*180 mm)

Supplying fitting & fixing CP Sink Cock with Regular Swinging Spout (Table Mounted Model) (Equivalent to Code No. 5357 of JAQUAR or similar brand).

Supplying fitting & fixing complete Bottel waste Trap (heavy quality) (a) Chromium plated Bottle trap 32mm with 190mm long connecting pipe and wall flange (equivalent to Code No. 545 & Model - Tropical/ Sumthing Special of ESSCO or similar brand)

Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary. (iii) Recess roll type size 150 mm X 150 mm

Providing & fixing in position CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).

Providing & fixing in position CP Piller Cock 15mm (equivalent to code no 507 & Model Tropical /Sumthing special of Essco pr similar brand.

Providing & fixing in position Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or simila

Providing & fixing C.P. brass towel rail fixed with 2 brackets. 25mm dia & 750mm long.

Fixing cromium plated soap container of approved make. Including providing & fixing screws, washers, cutting & making good the walls.a)cromium plated (a) Cromium plated.

Providing & fixing C.P. liquid soap holder of best quality. PTMT(Prayag or equivalent) (a) PTMT (Prayag or equivalent)

Supply of UPVC pipe & fittings B type confirming to IS 13592-1992, 110 mm dia. (SP , WP & RWP),

Supply of UPVC pipe & fittings B type confirming to IS 13592-1992, (ii) Plain tee

Supply of UPVC pipe & fittings B type confirming to IS 13592-1992, (iii) Door Tee

Supply of UPVC pipe & fittings B type confirming to IS 13592-1992, (v) Plain 'Y'

Supply of UPVC pipe & fittings B type confirming to IS 13592-1992, (vii) Double 'Y'

Supply of UPVC pipe & fittings B type confirming to IS 13592-1992, (ix) Bend 45 degree

Supply of UPVC pipe & fittings B type confirming to IS 13592-1992, (xi) Door Bend

Supply of UPVC pipe & fittings B type confirming to IS 13592-1992, (xv) Vent Cowl

Supply of UPVC pipe & fittings B type confirming to IS 13592-1992, (xx) 125/110 P Trap with W.C. Ring 75mm

Supply of UPVC pipe & fittings B type confirming to IS 13592-1992, (xxxiv) Multi Floor Trap without Top tile & Strainer 75 mm

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc.

Supplying, fitting and fixing C.I. square jalli. (i) 100 mm

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). 32 mm Dia

Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, (b) For Concealed Work (i) CPVC Pipes Class-1,SDR-11, 15mm Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, (b) For Concealed Work (i) CPVC Pipes Class-1,SDR-11, 20mm Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, (b) For Concealed Work (i) CPVC Pipes Class-1,SDR-11, 25mm Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11, 20mm Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11, 25mm Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11, 32mm Dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11, 40mm Dia

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.), (vi) 32mm Dia

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.),(vii) 25mm Dia

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.),(vii) 20mm Dia

Supplying PVC water storage tank of approved quality with closed top with lid (Black)- Multilayer. (d) 2000 litre capacity

Labour for hoisting plasting water storage tank. (ii) Above 1500 litre upto 5000 litre capacity. (a) Upto 1st story from G.L.

Labour for punching hole in plastic water storage tank upto 50mm dia

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I), 150 mm Dia

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I), 200 mm Dia

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I), 250 mm Dia

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I), 300 mm Dia

Supplying, fitting and fixing yard gully with approved H.C.I. grating complete, (ii) 150 mm X 100 mm with 150 mm gratings

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.), (iii) 65mm Dia

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.),(iv) 50mm Dia

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.),(v) 40mm Dia

Sluice valve chamber with C.I. heavy cover with locking arrangement,(weight not less than 25 kg) (size of chamber 450 mm X 600 mm inside upto 900 mm depth) 250 mm thick cement brick walls (6:1), 150 mm thick cement concrete (6:3:1) bed with stone chips, 20 mm thick cement plaster, (6:1) for inside wall and 15 mm thick cement plaster (4:1) for outer walls including rounding corners.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC, Light point wiring (all types). Average run 6 mtr

Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works, 13 mm dia 3 mm thick polythene pipe with 1x16 SWG GI earth continuity wire

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.150 mm x 100 mm x 65 mm

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A,TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

MCB DB -Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer (63A) with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (8-Way), (Legrand/L&T/ABB)

Supplying and fixing 240/415 V 4P MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection, (LEGRAND/L&T/ABB) 63A

Supplying and fixing 240/415 V TP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (LEGRAND/L&T/ABB) 6-32 A

Supplying and fixing 240/415 V SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection, (LEGRAND/L&T/ABB) 6-32 A

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below, 4C 10 sqmm termination

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below,3C 4 sqmm termination

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. 4 Core 10 sqmm AL cable

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. 3 Core 4 sqmm CU cable

Supplying and Drawing 1.1 KV single core stranded 'FR' / LSOH PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (Make: Havells / Finolex/Polycab/Gloster/R.R.Kable) 3 x 22/0.3 (1.5 sqmm)

Supplying and Drawing 1.1 KV single core stranded 'FR' / LSOH PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (Make: Havells / Finolex/Polycab/Gloster/R.R.Kable) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC for SB

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) 13mm dia 3mm thick Polythene Pipe

Supply, installation, testing and commissioning of following type of light fixtures as per drawings and specifications with all other accessories such as supporting rods / frames, anchor fasteners, necessary hardware etc. The rate shall include for fittings along with transformers where required, diffuser, chokes, starter, power factor improvement capacitors, wires, downrods etc., complete with all accessories to complete the installation as required. The rate shall also include the cost of the lamps. The fluorescent lamp shall be the Trulite high efficiency lamps. Fixing only pendent light fitting complete with lamp, shade and 24/0.2 mm (1.5 sqmm) flexible copper wire incl. S&F pendent holder

Supply, installation, testing and commissioning of following type of light fixtures as per drawings and specifications with all other accessories such as supporting rods / frames, anchor fasteners, necessary hardware etc. The rate shall include for fittings along with transformers where required, diffuser, chokes, starter, power factor improvement capacitors, wires, downrods etc., complete with all accessories to complete the installation as required. The rate shall also include the cost of the lamps. The fluorescent lamp shall be the Trulite high efficiency lamps. Fixing only tube light ceiling fitting on wall /ceiling by screws etc.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages, 8 SWG

Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 x 19/8 stranded GI (Hot Dip) wire (4 Mts. long), 25 mm dia x 150 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 40 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

S.S. CONSTRUCTION

M/S JOY MONDAL

NAMITA ENTERPRISE

M/S JOY MONDAL