PROVN OF HARD STANDING NEAR PUMP HOUSE AT TARAPORE OFFRS ENCLAVE AND CERTAIN MINOR WORK UNDER AGE B/R-I AND AGE B/R-II OF GE (SOUTH) DELHI CANTT-10

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for hardcore of gauge n.esc 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8, type D-2, Using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-40 grade with grey cement and pigment laid over and including 50 mm thick sand coushioning complete all as specified and as directed.

Providing cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and as directed.

M&L for providing reinforcement cement concrete 1:1.5:3 type B1 using 20 mm gradred stone Aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for formwork to soffits of suspended slab such as roof slab, floor slab, landings and similar work n.exc 200mm thick (Horizontal or sloping) complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including crancking bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.

M&L for brick work with sub class 'B' old size burnt bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surgace with CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in soft/loose soil complete all as specified and as directed.

M&L for PCC 1:2:4, Type B-2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F rolled mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc, flat iron fillets( for escuring wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to GDE Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S&F rolled mild steel work as in framed barred iron gates including all necessary drilling, bolting or riveting etc and similar work conforming to GDE Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S&F 5-10mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed.

S&F Mild steel round bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hopping for colours hooking ends and binding with a including security bolts post and struts in fencing including cutting top to shape as directed drilling holes notching for wire etc. complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, strainig bolts, etc. including provision of binding wire complete all as specified and as directed.

M&L for preparation of newly steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling complete all as specified and as directed.

M&L for renderning 15 mm thick in CM 1:4 on any faces of brick/concrete surfaces finished even and fair with out using extra cement complete all as specified and as directed.

M&L for 10 mm thk cement plaster in C:M 1:4 finished even and smooth above dado/skirting complete all as specified and as directed.

M&L for two coat of Distempering walls with distemper oil emulsion including Priming plastered and other surfaces with alkali resistant priming paint etc. complete all as specified and as directed.

M&L for preparation of newly plastered surfaces on external wall/ ceiling, applying two more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance eterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and as directed.

Taking down chowkhats or frames with shutter exc 1.5 sqm and nexc 4.00 sqm each but without taking off shutters from the frame incl removing complete all as specified and as directed.

Taking down chowkhats or frames with shutter nexc 1.5 sqm each without taking off shutters from the frame incl removing complete all as specified and as directed.

M&L for poweder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified. Note for Srl item Nos.30 to 32 : Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including glass pane/stainless steel wire cloth all fittings and fixtures and no extra shall be paid separately.

S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw/complete all as specified and as directed.

M&L for cutting holes into or through brick wall bult in cement mortar or cement lime mortar and stone walls n.exc 150 sq.cm including making good to the original surface complete all as specified and as directed.

M&L for cutting chases, pining in making good to facing where required and pinting in cement to , cutting not exc 10cm girth in brick walls complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

S&F Structural Steel in roof, purlins crane of angle or other section gusset plates, Flat Iron rails braces etc, drilled for fixing, and other covering r etc to be prepared for hanging and sliding with and including either hooks and hinges and other covering running rails and guides and hanging also fastening and fixing complete. Fe- 410 Grade E-250 quality -Bl complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the primess complete all as specified and as directed.

M&L for Coloured Dark shade vetrified ceramic tiles 8 mm thick (square / regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per Srl item No.40 above, but on vertical surfaces such as skirtings, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 on brick masonry surfaces complete all as specified and as directed.

Taking down shutter of any description exc 1.00 sqm nexc 2.00 sqm each and refixing the same opening including easing and adjusting the same complete all as specified and as directed.

S&F in repair 12 mm thick prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F in repair 18/19 mm thick prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F (width of flaps 30 mm) Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.

Removing excavated surplus soil n exc 50 m and depositing where directed at a level n exc 1.5 m above starting point complete all as specified and as directed.

Excavation in trenches n.ecx 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.

M&L for Cement concrete 1:4:8, Type D2 , using 40 mm graded stone aggregate, 100 mm thick, as sub-base and similar works complete all as specified and as directed.

M&L for Reinforced cement concrete 1:1.5:3 (nominal mix), type B-1, using 20 mm graded stone aggregate as in slabs supported on walls , beams and columns in floor, roofs, landing , balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for framed work as in doors, gates of angle fe -410 gde E 250 qureed section with gussed plates complete drilled or welded to be prepared for hanging or sliding with and including either hooks and hinges complete all as specified and as directed.

Cutting holes in brick walls in built in cement mortar or cement lime mortar exc half brick but not exc one brick complete all as specified and as directed.

M&L for Cement concrete 1:4:8, Type D-2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs/ truss and including Powder coated anodised aluminium snap grid frame size 605 x 605 mm and 2-3 mm thick for false ceiling complete all as specified and as directed.

S&F acoustic gypsum perforated board 4 mm thick of size 600x600 mm fixed in ceiling or laid/ inserted to Aluminium snap grid complete all as specified and as directed.

M&L for 18 mm thick wood plastic composites (WPC) board, 100% solid with density not less than 650 Kg per cubic meter , one side wood grain finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc. complete all as specified and as directed. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid in extra.

S&F 15mm mild steel, chromium plated rod with fixing brackets, fixed in cupboards for hanging cloth of adequate strength complete all as specified and as directed.

S&F stainless steel AISI 304 grade handle of size 75 mm long,etc. complete all as specified and as directed.

S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and as directed.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws as per architectural drawings and complete all as specified and as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors,windows& ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws as per architectural drawings and complete all as specified and as directed.

S&F 4mm thick ordinary quality glass, frosted on one side, in square n.exc 0.5 Sqm each pane, fixed with aluminium beading in aluminium window/ventilation etc. complete all as specified and as directed.

S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

M&L for providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg), as in sub base in floor/paving etc. complete all as specified and as directed.

Surface dressing n exc 15 cm deep complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and with hexagonal nut of exc 5 cm length with dia of shanis 11 to 15 mm etc. complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

M R INTERIOR HUB

SABHARWAL CONSTRUCTION CO.

JINDAL ENTERPRISES

aggarwal engineers contractors

M/S Parmod Johar

P R Constructions

M/s SAAR ENGINEERS

The new hut furnitures

V.K. Enterprises