Additional Cabin of JD Rooms in 2nd Floor, Annai Therasa Magalir thitta valagam, Valluvarkottam, Nunganmbakkam,Chennai-600034.

Additional Cabin of JD Rooms in 2nd Floor, Annai Therasa Magalir thitta valagam, Valluvarkottam, Nunganmbakkam,Chennai-600034.

Supply and Installation of Plywood Partition consists of Aluminium framework of 50x25x1.2mm thk fixing on 600mm centre to centre spacing on both vertical and Horizontal sides. This also includes one layer of 12mm plywood; In addition to that 50mm rockwool will be provided in the proposed aluminium framework spacing; Make for Aluminium Channel - Alumax / EQ; Plywood - Kitply / Archidply

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers.

Painting two coats of plastered surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.

Supply, Installtion, Testing & Commissioning of 2'x2' 35W LED Light Fitting. The fitting shall be recessed mounted in false ceiling. The rate shall including all required fixing accessories as per the site condition.

Supply, Laying, Testing and Commissioning of primary light point with 6A modular type switch with front plate in factory made GI box and wiring using (3 x 1.5) Sqmm 1100V grade stranded FRLS copper wires drawn in 25 mm dia 2mm thick pvc conduit including all conduit accessories such as bends, junction boxes etc., complete.(Primary light point means wiring from first switch control to the first light fitting). Greay colour wire to be used for Emergency lights points.

Supply, laying, Testing &Commissioning of circuit wiring using1.1grade (3R x 1.5) sqmm pvc insulated FRLS copper wire drawn in 25mm dia pvc conduit from the distribution board to Switch board/ first light and all accessories as required. All circuit terminations shall be provided with crimping type sockets / lugs, ferrules. There shall not be any joints in the circuits, only looping is allowed in terminal blocks & in switch boxs.

Supply and fixing of computer power outlets, Modular type (shuttered) switch sockets. Industrial type sockets shall be of Polycarbonate body with plug top. All switch / sockets shall be provided with printed labels / stickers indicating source code. Colour code for UPS socket plates : White/ as per Client or architect. Colour code for RP socket plates : Black/Grey/ as per the Client/architect requiment. All switch / sockets including front plate & frame which will be mounted on the metal boxes shall have removable film coat to protect from scraches & paint during installation.Supply and Fixing of Set of 3 nos of 5A 5Pin (Round cum Flat) modular type Socket controlled by 1no of 16A modular Switch with front plate, without Metal back box fixing all accessories.

Supply and Fixing of 1 no of 25A modular type Socket controlled by 1no of 25A modular MCB with front plate, Metal back box fixing in the wall/Partition and all fixing accessories. (AC POWER)

Supply and Fixing of 1 no of 5/15A modular type Socket controlled by 1no of 15A modular Switch with front plate,Metal back box fixing in the wall/Partition and all fixing accessories.

Supply Cables - 4-pair, Cat6 UTP Cable,

Supply and laying with pvc pipe including cost of Cable laying charges

Supply and fixing - Cat 6 I/O for Data

Supply and fixing with I/O back box for Data & Voice

Supply and fixing with Dual Model Face Plate

I/O Data & Voice End to End termination

Supply and fixing Patch Cord 1 Meter

Supply and fixing Patch Cord 2Meter

Providing, Working Table of size 5'x2.5'x2.5' and Side Table 3'x1.5'x2.5' consisting of four drawers on right side, one drawer and one shutter on left side, and one shelf in the middle. Unit shall be made of 19mm thick BWR board on top, bottom, sides, partitions, shelves, shutters and 12 mm thick BWR ply in drawer units.Supporting frame shall be made of Exposed surface of board/ply shall be finished with 1 mm thick laminate, edges with 18mm thick shall be fixed on top with suitable adhesives including edge grinding chamfering & polishing. Unit shall include suitable locking arrangement, screws, fasteners, hinges, adhesives, telescopic drawer channels, magnetic catchers, handles/ knobs and all other necessary fitting/ fixing arrangement etc. complete as per design, drawing and as directed by the Engineer-In-Charge

Supply and Delivery of High Back Revolving Chair

Supply and Delivery of Visitor Chair

1.5 TR Split Type AC Unit - 3 Star Rated

Labour charges for installation of Air condinecessary machinaries and labour etc all complete

Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay

Supply and laying of 5/8” and 3/8” copper pipe (Extra beyond 3 metres supplied with AC unit)

Supply and fixing of MS stand for fixing outdoor unit

AC Indoor and Outdoor Communication Cable Cord Wire

supply and fixing AC drain Pipe

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Please Enable Macros to View BoQ information