Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC ADAM KANAN JHARGRAM 721507 | JHARGRAM | WEST BENGAL | 721507 | L1 | Accepted-AOC Lowest Rate | |
| 2 | L2₹29.6 L+₹22,049 (0.75%)Rejected-Finance 00 DEY ENTERPRISE SODEPUR 9 10 PITS COLLIERY ASANSOL BARDHAMAN WEST BENGAL 713372 | PASCHIM BARDHAMAN | WEST BENGAL | 713372 | L2 | Rejected-Finance Higher than L1 | |
| 3 | L3₹29.7 L+₹31,429 (1.07%)Rejected-Finance 1 6 FAKIR CHAKRABORTY LANE | L3 | Rejected-Finance Higher than L1 | |
| 4 | L4₹29.8 L+₹38,213 (1.30%)Rejected-Finance INDARAGORA BANKURA W B | BANKURA | BANKURA | WEST BENGAL | L4 | Rejected-Finance Higher than L1 |
Tender Value
Refer Docs
EMD Value
₹60,605
Closing Date
5 Dec 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer
Raghunathpur, Jhargram
WBPHE/EE/JMD/NIeT 17_1 OF 2022-2023
2022_PHED_420122_1
WBPHE/EE/JMD/NIeT 17 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
30 days
Jhargram
Please refer Tender documents.
4 documents required · 4 mandatory
₹60,605
Yes
30 Jan 2023
14 Nov 2022
8 Dec 2022
14 Nov 2022
5 Dec 2022
16 Nov 2022
Amount
Dismantling the installed starters, main switches, cables, damaged internal wirings etc. part by part by hiring electrician as per direction of E.I.C.
Supply & delivery of following materials at site: 415 V, PLC based PDB cum MCC panel with minimum 2 mm thick CRCA sheet steel indoor type ,floor mounted , dust & vermin proof and degree of protection IP-54, conforming to IS-8623 with suitable Bus bar, Digital Voltmeter, Ammeter, Contactor, Delay timer, MCB, Valve Actuator starter etc. as per attached techincal specifications. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
Local Push Button Switch (LPBS) for local operation of installed centrifugal pumps having Start/Stop/Emergency push botton and other electrical accessories as per attached techincal specifications. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
1.1 KV grade 3.5 core 50 sq. mm XLPE insulated Al. Armored Cable conforming to IS 7098 (PART-I) with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (Cable shall be procured as per site requirement) (Power line from WBSEDCL to cut out upto Panel )
1.1 KV grade 3 core 25 sq. mm XLPE insulated Al. Armored cable conforming to IS 7098 (PART-I) with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (Cable shall be procured as per site requirement) (Control panel to motor of pump no. I )
1.1 KV grade 3 core 16 sq. mm XLPE insulated Al. Armored cable conforming to IS 7098 (PART-I) with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (Cable shall be procured as per site requirement) (Control Panel to motor of pump no. II, III & IV )
1.1 KV grade 4 core 6 sq. mm XLPE insulated Al. Armored Cable conforming to IS 7098 (PART-I) with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (Cable shall be procured as per site requirement) (From Busbar to Panel room DB)
1.1 KV grade 2 core 6 sq. mm XLPE insulated Al. Armored Cable conforming to IS 7098 (PART-I) with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (Cable shall be procured as per site requirement) (Power line from Bus Bar to staff quatar)
1.1 KV grade 2 core 4 sq. mm XLPE insulated Al. Armored Cable conforming to IS 7098 (PART-I) with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (Cable shall be procured as per site requirement) (For Yard lighting )
1.1 KV grade, 12 core, 1.5 sq. mm. Copper Control Cables, Solid Copper Conductor & Balance Stranded Copper, XLPE Insulated PVC Innersheathed, Armoured exruded PVC Type ST2 Sheathed as per IS 7098 (Part 1) 1988. (For actuator connection from panel) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019.
80 mm dia, (PN-1.0) CIDF, wafer type butterfly Valve operated by three phase actuator conforming to IS:13095/1991. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019.
100 mm dia, (PN-1.0) CIDF, wafer type butterfly Valve operated by three phase actuator conforming to IS:13095/1991. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019.
150 mm dia, (PN-1.0) CIDF, wafer type butterfly Valve operated by three phase actuator conforming to IS:13095/1991. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019.
100 Amp, 240/415 V Porcelain fuse unit (Base & Bridge) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019.
Hard wooden board (450 mm X 304.8 mmx 2 mm thick)
415 Volt, 100 Amp, TPN, AC-23 Amp, 50 Hz Switch disconnector fuse unit in sheet steel enclosure with four nos. of rewireable fuses. Make :-Havells (IHBRTE 4100 make).
415 V, 100 Amps, four way Bus-Bar chamber having four nos. Aluminium Bus-Bar. (Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019)
Twelve way SPN double door horizontal distribution board (I/C 4 + O/G 8)having IP 43 Protection. Make :- Havells (Model SPN 12 W DD DB Stack)
8 way SP&N Double Door horizontal Distribution Board (I/C 2 + O/C 6) conforming to IS 13032 & IS 8623 and IP43. Make :- Legrand (Model no. 5076 II)
240 V/415 V, 50 Hz, 10kA, 63 Amp, TPN MCB Isolator "C" type (AC-22 Amp) in accordance with IS/IEC 60947-3. Make :- Havells (DHMZC TNF 063)
240 V/415 V, 50 Hz, 10kA, 63 Amp, SPN MCB Isolator "C" type (AC-22 Amp) in accordance with IS/IEC 60947-3. Make :- Havells (DHMZC SN 063)
240/415V, 50 Hz, 10 kA, 6-32 Amp, SPN MCB conforming to IS / IEC: 60898-1, "C" characteristics. Make :- Legrand (408587)
240/415V, 50 Hz, 10 kA, 6-32 Amp, SP MCB conforming to IS / IEC: 60898-1, "C" characteristics. Make :- Legrand (408614)
Three module plastic surface box Make :-Legrand Cat No 6733 03 or equivalent /same technical speciication of other approved make )
Twelve module surface box (Metal) Make :- Legrand Cat No 689021or equivalent /same technical speciication of other approved make )
Three module plate with frame combine unit. Make :-Legrand Cat No 6732 03 or equivalent /same technical speciication of other approved make )
Twelve module plate with frame (combined Unit). Legrand Cat No 6732 62 or equivalent /same technical speciication of other approved make )
16/6 amp socket (white). Make :-Legrand Cat No 6730 45 or equivalent /same technical speciication of other approved make )
16 amp switch with indicator. Make :-Legrand Cat No 6730 10 or equivalent /same technical speciication of other approved make )
6 amp 5 pin Universal socket. Make :-Legrand Cat No 6730 44 or equivalent /same technical speciication of other approved make )
240 volt indicator (red). Make :-Legrand Cat No 6755 95
6 Amp switch. Make :-Legrand Cat No 6730 01 or equivalent /same technical speciication of other approved make )
Aesthetically designed post-top LED luminarie having die cast aluminium housing with IP66 protection with resistant to impact and corrosion. (Make :- Havells (RUBY PT35WLED757PSYMTOPC)
Flicker free, high efficiency and robust 2 ft long LED batten of 20W having IP20 & IK02 protection. Make: Havells (Lumline + BS 20W LED 8305 PC 5S)
Street light luminaire having Single Die ceramic base high power LED light source, IP66 protection, PDC housing with finless design and polycarbobate cover(IK08) with better thermal management/ Potted driver is to be provided,the luminaire and housing should be from the same manufacturer (cat no- BRP062 LED 68 CW SLC S1 PSU, LUMEN O/P- 6800, System Efficacy greater than 100 lumen/watt) Make-Philips or Equivalent and same techinal specification of other apprioved make as per direction of EIC.
230 mm sweep 8" dia. exhaust fan having double ball bearings, heavy duty motor with protective steel bird guard. (Make :- Havells (Ventilair DB)
PVC moulded chair without arm. (Make:- Nilkamal/Supreme/Cello)
PVC moulded table of 850 x 850 x 725 mm size. (Make:- Nilkamal/Supreme/Cello)
32 mm dia G.I. pipe. (ISI Medium)
Double arm bracket 40 mm dia and 1.5 mtr. long having angle 270°/900 in between.
Fitting fixing the above supplied item Erection of suitable nos. and size of concreate foundations (1:2:4) from floor with necessary plastering and net cement finishing and installation of the panel over the foundation with making earthing arrangement from nearest earth grid by means of ( 20 mm x 3 mm ) galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl.drilling holes, with bolts, nuts, washers etc.all complete as per direction of E.I.C.
Erection of suitable size concrete base and making necessary structure by angle/flat iron frame and fitting-fixing the LPBS on the structure by means of required nos. of SS nuts,bolts, washers and making earthing arrangement from nearest earth grid including painting (2 coat of synthetic enamel paint over one coat of Red Oxide primer) all complete as per direction of EIC
Fitting-fixing of the supplied wooden board (as in item no. 15) at suitable position on wall with fitting-fixing of supplied 100 Amp Porcelain fuse units (as in item no. 14) on the board by supplying and fitting-fixing of required nos. of nuts-bolts-washers etc. all complete as per direction of E.I.C
Fixing only TPN switch fuse unit (as in item no. 16) in Sheet Steel enclosure with HRC fuses on angle iron frame at suitable position on wall of panel room with nuts-bolts-washers etc. all complete as per direction of E.I.C.
Supplying and fixing of sheet steel (16 SWG) cable end box on 100 Amp TPN SFU enclosure with nuts bolts etc. incl. powder coated painting all complete as per direction of E.I.C.
Fitting-fixing of the supplied 415 V, 100 Amps, four way Bus-Bar chamber (as in item no. 17) on angle iron at suitable position on wall of panel room with nuts-bolts-washers etc. all complete as per direction of E.I.C
Fitting-fixing the supplied SPN MCBDBs in Sheet Steel enclosure on flat iron frame at suitable position in wall on panel room & staff Quarter,mending good damages by supplying necessary fixing materials viz. nut, bolts, washers etc. with cable end box all complete as per direction of E.I.C.
Fitting-fixing the supplied Isolators, MCB (as item no. 20 to 21 ) within SPN DB (item no- 18 & 19) with necessary interconnection by 2.5 sqmm FRLSH stranded Cu-wire all complete as per direction of E.I.C.
Fitting-fixing of the above metal surface box, 16/6 Amp socket, 16 Amp switch, 6 Amp switch, indicator etc. as in item no. 24 to 32 at suitable position on wall of pump house and Staff Quarter by using fixing materials all complete as per entire satisfaction of E.I.C.
Distribution in 1.1 KV grade single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Brand approved by EIC) following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. including mending damages to wall all complete as per direction oif E.I.C. (Wire shall be procured as per site requirement) 2x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)
2 x 56/0.3 (4 sqmm) + 1 x 22/0.3 (1.5 sqmm)
Fixing only exhaust fan (as in item no. 36) after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter. 38 cm
Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) a) For aluminium 23 cm Exhaust fan (8")
Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) a) For aluminium 30 cm Exhaust fan (12")
Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. (ii) With 25 x 25 x 3 mm angle iron support( 300 X 50 X 1.25 mm) (18 SWG)
Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300 x 50 x 1.25 mm (18 SWG)
Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300 x 50 x 1.25 mm (18 SWG)
Laying of cable as in item no. 4) on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting all complete as per direction of E.I.C.
Laying of cable as in item no. 5) on existing Cable Tray and binding with suitable size GI wire all complete as per direction of E.I.C.
Laying of cable (as in item no. 6) on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting all complete as per direction of E.I.C.
Laying of cable (as in item no. 7 & 8) on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting all complete as per direction of E.I.C.
Laying of cable (as in item no. 8 & 9) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed all complete as per direction of E.I.C.
Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire Up to 50 sqmm.
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of cable as in item no. 4) all complete.
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of cable as in item no. 5) all complete.
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of cable as in item no. 6) all complete.
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of cable as in item no. 7) all complete.
Finishing the end of cable as in item no. 4) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials all complete as per direction.
Finishing the end of cable as in item no. 5) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials all complete as per direction.
Finishing the end of cable as in item no. 6) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials all complete as per direction.
Finishing the end of cable as in item no. 7) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials all complete as per direction.
Supplying & Erection of 75 x 40 x 5 x 600 mm long Galv. angle iron cross-arm for carrying insulators incl. painting all complete as per direction of E.I.C.
Supplying, erection and fitting of 75 x 88 mm porcelain shackle insulator complete with 190 x 30 x 5 mm Galv. (Hot Dip) strips with 15.88 mmdia Galv. bolts, nuts, etc. for conductor upto 7/3.10 mm, 32 sqmm of AAC/equivalent size of ACSR.
Supplying & fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint all complete as per direction.
Fixing only single fluorescent light fitting (as in item no. 34) complete with all accessories directly on wall/ceiling/ HW round block and suitable size and nos. of of MS fasteners all complete as per direction of E.I.C.
Fixing only Floodlight fitting (as in item no. 33 & 35.) with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure all complete as per direction of E.I.C.
Fitting-fixing of the double arm bracket on the existing pole with required nut-bolts, washers etc. all complete as per direction of E.I.C.
Pole earthing by supply and installation of GI pipe electrode 50 mm dia.and 3.64 mm thick x 3.04 mtr. long including suitable gauge G.I. wire and other necessary materials as per general specification and direction of E.I.C.
Painting all the single arm G.I brackets, poles, pipes etc. with 2 coats of Synthetic Enamel paint over 1 coat of Red Oxide primer after cleaning and preparation of surface by emery paper all complete as per direction.
S&F of 3" dia 1.5 mt minipole with baseplate to be fixed on rooftop incl. S&F of 1.5 mtr long arm bracket (removable type) incl. CC muffing (450X450X600) with neat cement finish & painting incl.S&F 200x150x100 mm 16 SWG CI loop box including neccessery power connection by 3X22/.03 (1.5 Sqmm) (2 nos. Phase and Neutral and 1 no ECC) FRLS-H pvc insulated & unsheated copper wire (approved make) in 20 mm size PVC rigid conduit FRLS-H (precision Make) including necy. fittings as required as per direction of EIC. (for 12m length @ 102/mtr.)
(a) Earthing with 50 mm diameter G.I. pipe 3.64 mm thick x 3Mtr. (10ft.) long and 1 x 4 SWG G.I. wire (4Mtr.long) 13 mm diameter x 80mm (3inch) long G.I. Bolts, double nuts, washer including S & F of 15mm diameter G.I. pipe protection (1 Mtr. Long) to be filled with bitumen partly below ground level to an average depth of 3.65Mtr.(12ft.) below the ground level and restoring the surface duly rammed. i) For soft soil by ISI Medium GI pipe.
(b) Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
(c) Extra for treatment of soil by salt and charcoal coke for pipe electrode.
(d) Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.Length of busbar is 0.5 mtr.
(e) Connecting the equipments body to earth busbar including S & F of 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. all complete as per direction of E.I.C.
Supply, delivery and fitting-fixing of 230 volt 1200 mm sweep AC ceiling fan with ball bearing complete with all accessories such as blade, canopy, fork, down rod etc. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019.
Add: 18% GST
Add: 1% CESS
DEY ENTERPRISE
H.K.DAS AND CO.
M/S NABIN GOPAL SENGUPTA
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .