Construction of panch work in Dhewa pul nagar palika parishad shamli Area

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dimantled material up to a lead of I kilometre as per direction of Engimeer in charge. 420.80x() x0.735x107/107

Cartage of Ballast, Kankar, Coal, Grit or Sand 1 etc. including loading and unloading but excluding stackings on pucca roads. Upto 8 Km.

WBM Grading 3 - Providing, laying, spreading and compacting stone aggregates of specific sizes 53 mm to 22.4 mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade 10 and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. I/c all taxes, Labour cess, levy, toll fee, royalty, Contractor Profit but excluding GST.

Providing and applying tack coat with bitumen using bitumenn VG-10 Pressure distributor at the rate of 0.25kg per sqm on the prepared bituminous surface leaned with mechanical broom.

Providing and laying Dense Graded Bituminous Macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects.i/c all taxes, labour cess, levy, royalty excluding GST

Providing and applying tack coat with bitumen using bitumenn VG-10 Pressure distributor at the rate of 0.25kg per sqm on the prepared bituminous surface leaned with mechanical broom.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading. premixed with bituminous binder VG-30 @ 5.40 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with mechanical control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509