TTPS Operation circle MPM II ACP Renewing the motor and pump MS bed frame, rectifying the concrete bed and commissioning of condenser pump A and renewing the wornout makeup water S B line of cooling tower A,B and C of Unit IV and V AC Plant

Charges for decoupling the 15 KW motor and pump after dismantling the suction and discharge cooling water pipe lines and releasing the motor and pump assembly including the rates for lead and lift, T&P hire charges and consumables.

Charges for fabrication of MS bed frame of size 1300 X 350mm by using 150 X 75mm channels to the required size cutting, welding and fabricating outer frame with 2 Nos cross supporting channels pump and motor, providing motor bed supports at a height of 150mm over the frame by cutting and welding 75 X 75 mm angles, cutting 4 Nos of wedge plate, drilling 12mm hole on its center, thread making suitable and welding the threaded wedge plate on the frame at four corners of motor bed for alignment as per existing bed frame, including hire charges for welding m/c cutting set and required T & Ps and consumables etc

Material Cost (Tenderer scope) : MS Channel Size : 150 X 75mm (Length -4.7 mtr)

Charges for drilling 4 Nos of 16mm holes on frame for grouting and drilling 8 Nos 16 mm holes in bed for fixing pump and motor including hire charges m/c and required T & Ps and consumables etc.

Charges for cutting and removel of wornout grouting bolts, old concrete and chipping of 4 numbers square pocket to the size of 100 X100 and 150mm depth for fixing the grouting bolt

Charges for filling the bed size (1300X350) mm with RCC using cement with 12 mm machine crushed HBG and curing the bed etc., including cost of consumables and hire charges for T & Ps etc.,

Charges for dismantling the top cover and all rotating assembly from impellers, wear ring, bearings,bearing housing, spacer, bush, gland ring, sleeve lock nut etc for sampling purpose and renewing the shaft including the charge of T&P hire charges and consumables

Material Cost (Tenderer scope) : Shaft with lock nut and key

Charges for fixing the new impeller, impeller guide ring, shaft sleeves, lock nuts, glands bearing, wear ring, bearing housing in the new shaft with lock nut and checking free rotation etc including charges for T&P and consumables.

Charges for erection of released pump and motor on the bed connecting the suction and discharge pipe lines and checking alignment the pump & motor trial run checking and commissioning the rate including T&P and consumables

Material Cost (Tenderer scope) : Tyre F80

Charges for renewing the wornout Unit IV & V AC Plant Cooling tower Makeup line of size 65 NB ERW pipe (Appx total length of 40 mtr) from service water line available in the B row & C row column as per the direction of Engineer–in –charge.The rate including T&P hire charges, consumables etc.,

Material Cost (Tenderer scope) : 65 mm MS ERW Pipe

Material Cost (Tenderer scope) : 65mm MS ERW Bend

Material Cost (Tenderer scope) : Float Valve Assembly

Material Cost (Tenderer scope) : MS Flange 65 NB

Charges for fixing of 65NB valve (2Nos) in the makeup water line, providing 25 mm valve (2Nos) of air vent pipes & providing 50 NB Gun metal valve (3 Nos) for float valve of the cooling Tower A,B & C as per the direction of engineer in charge. The rate including the cost of T& P consumables

Material Cost (Tenderer scope) : 25NB Brass valve (Gun metal valve)

Material Cost (Tenderer scope) : 50NB Brass valve (Gun metal valve)

Material Cost (Tenderer scope) : 65NB Gate Valve

Charges for fabrication and fixing of MS ladder height 7 mtr by MS angle 65 X 65 X 6 mm angle for approch make up water inlet valve operation of 'C' row cooling water line.

Material Cost (Tenderer scope) : MS angle Size (65x65x6)mm (Length 21.5mtr)

Charges for providing scaffolding arrangement up to the height of 5 to 6 mtr for cutting, the exisiting 65NB pipe and replacing the new 65NB pipe and newly providing ladder . After completion of work dismantling the scaffolding arrangement including cost of scaffolding materials and hire charges for T&P's

Charges for Two coats of enamel painting in newly erected 65 mm MS pipe makeup water line including cost of paint and hire charges for T&P's.